User Guide
Table Of Contents
- Notices
- Safety information
- Care & cleaning
- Takeback services
- 1.1 Welcome!
- 1.2 Package contents
- 1.3 Monitor introduction
- 2.1 Monitor standing positions
- 2.2 Connect the USB monitor with system
- 2.3 Assembling/Dis-assembling the ROG tripod
- 2.4 How to Adjust tilt strength of ROG Tripod
- 2.5 Announcements
- 3.1 OSD (On-Screen Display) menu
- 3.2 Specifications
- 3.3 Troubleshooting (FAQ)
- 3.4 Supported Timing List
3-6
Chapter 3: General Instruction
• Color Temp.: Contains three preset color modes (Cool, Normal, Warm)
and User Mode.
• Gamma: Contains three gamma modes including 1.8, 2.2, 2.5
• Saturation: The adjusting range is from 0 to 100.
• In the User Mode, colors of R (Red), G (Green), and B (Blue) are user-
configurable; the adjusting range is from 0 ~ 100.
4. Power
You can adjust the Input Device Pop-up and
Input Device from this
main function.
Input Device Pop-up
Input Device
Color
Image
Gaming
Input Select
Power
System Setup
MyFavorite
Auto Rotation
Type-C 1920x1080@ 60Hz
Racing Mode
82% ROG Strix XG16
• Input Device Pop-up : To enable/disable Input Device & Power Supply
from NB/PC pop-up questions WHENEVER in connection.
• Input Device :
Select “Phone” if connect to mobile phone ( Power supply function is not
provided under “Phone” due to common mobile devices cannot provide
enough power output ). Select “NB/PC” if connect to NB/PC and then
select “Charging From NB/PC” with charging function. This function
allows you to sustain the working time for longer.In NB/PC sub-function,
you can disable power supply function by selecting “No Charging From
NB/PC”
* No Charging here means getting power under 100mA, and this does not affect the battery life/usage of host
devices connected.
* Monitor battery power could still drop after turning on Charging from NB/PC or ECO Mode due to some of
devices have limited power output.