Première édition Avril 2021 Copyright © 2021 ASUSTeK COMPUTER INC. Tous droits réservés. Aucune partie de cette publication, y compris les produits et logiciels y étant décrits, ne peut être reproduite, transmise, transcrite, stockée dans un système d’interrogation ou traduite dans une langue quelconque sous quelque forme et par quelque moyen que ce soit, exception faite de la documentation conservée par l’acheteur à des fins de sauvegarde, sans l’autorisation écrite expresse de ASUSTeK COMPUTER INC.
Table des matières Avertissements............................................................................................ iv Informations de sécurité.............................................................................. v Soin & Nettoyage......................................................................................... vi Takeback Services...................................................................................... vii Informations produit pour le label énergétique de l’UE.......
Avertissements Déclaration de la Commission Fédérale des Télécommunications (FCC) Cet appareil est conforme à la section 15 du règlement de la FCC. Son fonctionnement est sujet aux deux conditions suivantes : • Cet appareil ne doit pas causer d’interférences nuisibles, et • Cet appareil doit être capable d’accepter toutes les interférences, y compris les interférences pouvant provoquer un fonctionnement indésirable.
Cet appareil numérique de la classe B respecte toutes les exigences du Réglement sur le matériel brouiller du Canada. Informations de sécurité • Avant d’installer le moniteur, lisez attentivement toute la documentation qui accompagne la boîte. • Pour éviter tout incendie ou électrocution, n'exposez jamais le moniteur à la pluie ni à l'humidité. • N’essayez jamais d’ouvrir le boîtier du moniteur.
• L’ajustement du contrôle de volume ainsi que l’égaliseur à d’autres réglages que la position centrale peut augmenter la tension de sortie du casque ou des écouteurs et donc le niveau de pression acoustique. • L’adaptateur est utilisé seulement pour ce moniteur, ne l’utilisez pas à d’autres fins. Votre appareil utilise l’une des alimentations suivantes : - Fabricant : Delta Electronics Inc.
Conventions utilisées dans ce guide ATTENTION : Informations pour éviter de vous blesser en essayant de terminer un travail. AVERTISSEMENT : Informations pour éviter d’endommager les composants en essayant de terminer un travail. IMPORTANT : Informations que vous DEVEZ suivre pour terminer une tâche. REMARQUE : Astuces et informations supplémentaires pour aider à terminer un tâche.
viii
1.1 Bienvenue ! Merci d'avoir acheter le moniteur de jeu ROG ! Le dernier moniteur à écran LCD large d’ASUS offre un affichage plus large, plus lumineux et d’une clarté cristalline, en plus de toute une gamme de fonctions qui améliorent votre séance de visionnage. Avec ces fonctions du moniteur, vous pouvez profiter du confort et vous régaler d’une expérience visuelle ! 1.
1.3 Présentation du moniteur 1.3.1 Vue de devant/latérale 1 2 3 4 5 1. Bouton ( 5 directions) : • Active le menu OSD. Active l’élément du menu OSD sélectionné. • Augmente/diminue les valeurs ou déplace votre sélection en haut/ bas, à gauche/droite. • Active le menu OSD quand le moniteur entre en mode veille ou affiche le message « PAS DE SIGNAL ». 2. Bouton • Quitte l’élément du menu OSD. • Active le menu OSD quand le moniteur entre en mode veille ou affiche le message « PAS DE SIGNAL ». 3.
• Active le menu OSD quand le moniteur entre en mode veille ou affiche le message « PAS DE SIGNAL ». 5. Bouton d’alimentation/voyant d’alimentation • Pour allumer ou éteindre le moniteur. • Les couleurs du témoin d’alimentation sont indiquées dans le tableau ci-dessous. 1.3.2 État Description Blanc Orange ARRÊT MARCHE Mode Veille/Aucun signal ARRÊT Vue de derrière 10 1 2 3 4 5 6 7 8 9 1. Port DC-IN. Ce port sert à brancher le cordon d’alimentation. 2. Prise de l’écouteur.
1.3.3 Fonction GamePlus La fonction GamePlus fournit une boîte à outils et crée un meilleur environnement de jeu pour les utilisateurs pendant différents types de jeux. La superposition de viseur avec 6 différentes options de viseur vous permet de choisir celle qui convient le mieux à votre jeu. Il y a aussi une minuterie à l’écran que vous pouvez positionner sur la gauche de l’écran afin de pouvoir garder une trace du temps de jeu écoulé.
1.3.4 Fonction GameVisual La fonction GameVisual vous aide à sélectionner facilement les différents modes d'affichage. Pour activer GameVisual : 1. Appuyez le bouton de raccourci GameVisual. 2. Déplacez le bouton en surbrillance. 3. Appuyez le bouton 4. Pour quitter le menu, déplacez le bouton ( ( ) vers le haut/bas pour mettre un réglage désiré ) ou déplacez le bouton à droite pour l’activer. ( ) à gauche.
1.3.5 Autre(s) fonction(s) HDR Le moniteur prend en charge le format HDR. Lors de la détection du contenu HDR, un message « HDR ACTIVÉ » apparaîtra. Lors de l’affichage du contenu HDR, les fonctions suivantes ne sont pas disponibles : ELMB Sync, GameVisual, Shadow Boost, Luminosité, Contraste, ASCR, Contrôle de l’aspect, Filtre de lumière bleue, Température Couleur, Gamma, Saturation, Atténuation dynamique (définie sur MARCHE).
2.1 Assemblage de la base/du bras du moniteur 1. Insérez la base dans le bras. Nous vous conseillons de couvrir la surface de la table avec un chiffon doux pour éviter d’endommager le moniteur. Taille de vis de la base : M6 x 15 mm. 2.2 Gestion des câbles Vous pouvez organiser les câbles à l’aide du couvercle du port entrée/sortie. • Organiser les câbles • Utiliser couvercle du port entrée/sortie : le couvercle peut être installé ou retiré.
2.3 Réglage du moniteur • Pour une vision optimale, il est recommandé d'avoir une vision de face sur le moniteur, ensuite réglez l'angle du moniteur pour qu'il soit confortable. • Tenez le pied pour empêcher le moniteur de tomber quand vous le changez d’angle. • L’angle d’ajustement recommandé est +20˚ à -5˚ (inclinaison)/+25˚ à -25˚ (pivot)/±100 mm (ajustement de la hauteur)/90˚ (vue portrait).
2.4 Démontage du bras (montage mural VESA) Le bras détachable de ce moniteur, est spécialement conçu pour une installation murale VESA. Pour démonter le bras : 1. Couchez le moniteur sur une table face vers le bas. 2. Retirez les couvercles là où le moniteur et le bras se rejoignent. 3. Desserrez les quatre vis à l’arrière du moniteur et enlevez le bras/la base. 1 2 3 4 Nous vous conseillons de couvrir la surface de la table avec un chiffon doux pour éviter d’endommager le moniteur.
2.5 Branchement des câbles Branchez les câbles selon les instructions suivantes : • • Pour brancher le cordon d’alimentation : a. Connectez l’adaptateur d’alimentation sur l’entrée CC du moniteur. b. Connectez une extrémité du cordon d’alimentation à l’adaptateur d’alimentation et l’autre extrémité à une prise électrique. Pour brancher le câble DisplayPort/HDMI : a. Branchez une extrémité du câble DisplayPort/HDMI sur le port DisplayPort/HDMI du moniteur. b.
3.1 Menu OSD (Affichage à l’écran) 3.1.1 Reconfiguration DisplayPort-1 2560x1440@ 270Hz Mode course Aura OFF ROG Strix XG27AQM HDR Off Jeux Surcadençage Image OD Couleur Adaptive-Sync (DP) Sélection Entrée ELMB SYNC Effet d'éclairage GamePlus MyFavorite GameVisual Configuration Système Shadow Boost BACK MOVE/ENTER 1. Appuyez le bouton 2. Déplacez le bouton ( ) en haut/bas pour naviguer dans les fonctions. Mettez la fonction voulue en surbrillance, et appuyez bouton ( ) pour l’activer.
• • Le surcadençage peut provoquer un scintillement de l’écran. Pour réduire ces effets, déconnectez le câble DisplayPort et utilisez le menu OSD du moniteur pour réessayer avec un taux de rafraîchissement maximal plus sûr. • Cette fonction est uniquement disponible lorsque Ver. DisplayPort est DisplayPort 1.2+HDR. OD : Améliore le temps de réponse du niveau de gris du panneau LCD. Cette fonction n’est pas disponible lorsque ELMB SYNC est activé.
2. Image DisplayPort-1 2560x1440@ 270Hz Mode course Aura OFF ROG Strix XG27AQM HDR Off Jeux Luminosité 50 Image Contraste 80 Couleur HDR Sélection Entrée Atténuation dynamique Effet d'éclairage ASCR MyFavorite Contrôle de l'aspect Configuration Système Filtre de lumière bleue MOVE/ENTER BACK • Luminosité : La plage de réglage est de 0 à 100. • Contraste : La plage de réglage est de 0 à 100. • HDR : Contient deux modes HDR.
3. • Pour réduire la fatigue oculaire et la sécheresse de vos yeux, vous devez reposer vos yeux périodiquement en vous concentrant sur des objets éloignés. • Les exercices oculaires peuvent aider à réduire la fatigue oculaire. Répétez ces exercices souvent. Si la fatigue oculaire persiste, veuillez consulter un médecin. Exercices oculaires : (1) Regardez de manière répétée vers le haut et vers le bas, (2) roulez des yeux lentement, (3) faites bouger vos yeux en diagonale.
5. Effet d’éclairage DisplayPort-1 2560x1440@ 270Hz Mode course Aura OFF ROG Strix XG27AQM HDR Off Jeux Aura Sync Image Aura RGB Couleur Sélection Entrée Effet d'éclairage MyFavorite Configuration Système BACK MOVE/ENTER EXIT • Aura Sync : Permet d’activer ou de désactiver la fonction Aura Sync qui synchronise l’effet de lumière Aura RGB parmi tous les périphériques pris en charge.
7. Configuration Système DisplayPort-1 2560x1440@ 270Hz Mode course Aura OFF ROG Strix XG27AQM HDR Off Jeux Langue Image Son Couleur USB Hub Sélection Entrée Indicateur d’alimentation Effet d'éclairage Verr touche d'alim MyFavorite Serrure Configuration Système Configuration OSD Ver.
3.2 Aura Armoury Crate est un logiciel qui contrôle les DÉL colorées sur les périphériques pris en charge, comme les moniteurs, les cartes mères, les cartes graphiques, les PC de bureau, etc. Aura vous permet d’ajuster la couleur des DÉL RVB sur ces périphériques et de sélectionner différents effets de lumière. Vous pouvez également corriger ou ajuster la couleur des DÉL en les étalonnant. Pour activer Aura : 1. Réglez la fonction Aura Sync sur Marche dans le menu OSD. 2. Connectez le port USB 3.
3.3 Résumé des spécifications Type d’affichage Taille de l’écran Résolution max. Taille des pixels Luminosité (Typ.) Rapport de contraste (Typ.) Angle de vision (H/V) CR > 10 Couleurs d’affichage Temps de réponse Sélection de la température des couleurs Entrée analogique Entrée numérique Prise de l’écouteur Entrée audio Haut-parleur (intégré) Port USB 3.
Accessoires Conformité et normes Guide de mise en route, carte de garantie, Adaptateur d’alimentation, cordon d’alimentation, câble DP, câble HDMI (en option), câble USB, rapport de test de calibrage des couleurs, couvercle du port entrée/sortie, Autocollant ROG CB, CE, CU, CCC, cTUVus, MEPS, FCC, RCM, BSMI, VCCI, RoHS, WEEE, J-MOSS, ErP, PSE, CEL, Windows 7 WHQL, Windows 10 WHQL, KCC, E-Standby, TUV-Flicker Free, TUV-Low Blue Light, UkrSEPRO, ICES-3, CEC, PC Recycle, PSB *Spécifications sujettes à modif
3.4 Dimensions du contour ASUS XG27AQM Outline Dimension *Unit: mm(inch) Pivot: +90 Degree 90 20 5 133.98 [5.3] 175.43 [6.9] 8.48 [0.3] 167.83 [6.6] 306.86 [12.1] 613.7 [24.2] 596.74 [23.5] 560.48 [22.1] 7.95 [0.3] 22.63 [0.9] 335.66 [13.2] 367.21 [14.5] 140.02 [5.5] 254.96 [10.0] 25 507.22 [20.0] 88.72 [3.5] 31.71 [1.2] 22.26 [0.9] Swivel: +/-25 Degree 231.44 [9.1] 100 [3.9] 396.52 [15.6] 140.02 [5.5] 25 84.01 [3.3] 117 [4.6] 100 [3.
3.5 Guide de dépannage (FAQ) Problème Solution possible Le voyant DEL d'alimentation n’est pas ALLUMÉ • Appuyez sur le bouton pour vérifier si le moniteur est en mode ALLUMÉ. • Vérifiez si le cordon d'alimentation est correctement branché sur le moniteur et sur la prise de courant. Le voyant DEL d’alimentation est de • Vérifiez si le moniteur et l’ordinateur sont en couleur blanche et il n’y a aucune image mode ALLUMÉ.
3.
Fréquence vidéo Résolution Fréquence HDMI DP Taux de rafraîchissement 59,94Hz Taux de rafraîchissement Non prise en charge 720x480P 60Hz Non prise en charge 1280x720P 59,94Hz 59,94Hz 1280x720P 60Hz Non prise en charge 59,94Hz 720x480P 1440x480P 60Hz 1440x480P 60Hz 60Hz 1920x1080P 59,94Hz 59,94Hz 1920x1080P 60Hz 60Hz 1920x1080P 120Hz 120Hz Moniteur LCD de jeu Série XG27AQM Strix ROG 3-13
3-14 Chapitre 3 : Instructions générales