Ensimmäinen painos Lokakuu 2019 Copyright © 2019 ASUSTeK COMPUTER INC. Kaikki oikeudet pidätetään. Tämän käyttöoppaan osia tai siinä kuvattuja tuotteita ja ohjelmistoja ei saa monistaa, siirtää, jäljentää, tallentaa hakujärjestelmään tai kääntää millekään kielelle missään muodossa tai millään tavalla, lukuun ottamatta dokumentaatiota, jonka ostaja on säilyttänyt varmistustarkoituksessa, ilman ASUSTeK COMPUTER INC:n (” ASUS”) erikseen myöntämää, kirjallista lupaa.
Sisältö Ilmoitus......................................................................................................... iv Turvallisuustiedot......................................................................................... v Huolto ja puhdistus..................................................................................... vi Takeback Services...................................................................................... vii Luku 1: Tuotteen esittely 1.1 Tervetuloa! ............
Ilmoitus Federal Communications Commissionin ilmoitus Tämä laite täyttää FCC-määräysten osan 15 vaatimukset. Laitteen käyttö on seuraavien ehtojen alaista: • Tämä laite ei saa aiheuttaa haitallisia häiriöitä ja • Tämän laitteen on siedettävä muualta tuleva häiriö, myös mahdollisesti asiaankuulumatonta toimintaa aiheuttavat häiriöt. Tämä laite on testattu, ja sen on osoitettu täyttävän FCC-määräysten osassa 15 luokan B digitaalilaitteille asetetut raja-arvot.
Turvallisuustiedot • Lue huolellisesti kaikki toimitukseen kuuluvat asiakirjat ennen näytön asettamista. • Estääksesi tulipalon tai sähköiskun vaaran älä koskaan altista näyttöä sateelle tai kosteudelle. • Älä koskaan yritä avata näytön koteloa. Näytön sisällä oleva vaarallisen korkea jännite voi johtaa vakavaan fyysiseen vammaan. • Jos virtalähde on rikkoutunut, älä yritä korjata sitä itse. Ota yhteys pätevään huoltoteknikkoon tai jälleenmyyjään.
Tämä yli ruksattu roskakori osoittaa, että tuotetta (elektroniikka tai elohopeaa sisältävä nappipatteri) ei saa hävittää kotitalousjätteen mukana. Tarkista paikalliset määräykset elektroniikkatuotteiden hävittämisestä. Huolto ja puhdistus • Ennen kuin nostat tai sijoitat näytön uuteen paikkaan, on parempi irrottaa kaapelit ja virtajohto. Sijoita näyttö uuteen paikkaan oikealla nostotekniikalla. Kun nostat tai kannat näyttöä, pidä kiinni näytön reunoista. Älä nosta näyttöä sen telineestä tai johdosta.
Mistä löydät lisätietoja Katso seuraavista lähteistä lisätietoja sekä tuote- ja ohjelmistopäivityksiä. 1. ASUS:n verkkosivut ASUS-yrityksen maailmanlaajuiset verkkosivustot tarjoavat päivitettyjä tietoja ASUS-laitteisto- ja -ohjelmistotuotteista. Katso: http://www.asus.com 2. Valinnainen dokumentaatio Tuotteen pakkaus saattaa sisältää jälleenmyyjän lisäämiä valinnaisia asiakirjoja. Nämä asiakirjat eivät sisälly vakiopakkaukseen.
viii
1.1 Tervetuloa! Kiitos ROG-pelinäytön hankkimisesta! ASUS:n uusin laajakuva-LCD-näyttö tarjoaa leveämmän, kirkkaamman ja kristallinkirkkaan näytön sekä runsaasti ominaisuuksia, jotka parantavat katselukokemustasi. Näillä ominaisuuksilla varustettuna pääset nauttimaan näytön tuomista ilahduttavista visuaalisista elämyksistä! 1.
1.3 Näytön esittely 1.3.1 Etunäkymä XG27UQ 1 2 3 4 5 XG27UQR 1. ( 5-suuntainen) -painike: • Kytkee OSD-valikon päälle. Säätää valittua OSD-valikon kohdetta. • Lisää/vähentää arvoja tai liikuttaa valintaasi ylös/alas/vasemmalle/ oikealle. • Kytkee OSD-valikon päälle, kun näyttö siirtyy valmiustilaan tai näyttää “NO SIGNAL” (EI SIGNAALIA) -viestin. 2. painike • Poistuu OSD-valikkokohdasta. • Kytkee OSD-valikon päälle, kun näyttö siirtyy valmiustilaan tai näyttää “NO SIGNAL” (EI SIGNAALIA) -viestin.
• Vaihda oikopolun toimintoa menemällä MyFavorite > Shortcut (Oikopolku) > Shortcut 2 (Oikopolku 2)-valikkoon. • Kytkee OSD-valikon päälle, kun näyttö siirtyy valmiustilaan tai näyttää “NO SIGNAL” (EI SIGNAALIA) -viestin. 5. Virtapainike/virran merkkivalo • Kytkee näytön päälle/pois. • Virran merkkivalon värimääritelmä on alla olevan taulukon mukainen. 1.3.2 Tila Kuvaus Valkoinen Oranssi POIS PÄÄLLÄ Valmiustila/Ei signaalia POIS Takanäkymä XG27UQ 9 XG27UQR 9 1. Kensington-lukon aukko. 2.
6. DisplayPort. Tämä portti on DisplayPort-yhteensopivan laitteen liittämiseksi. 7. USB 3.0 ylävirran portti. Tätä portti on USB-ylävirran kaapelin liittämistä varten. Liitäntä mahdollistaa näytön USB-porttien toiminnan. 8. USB 3.0 -alavirran portit. Nämä portit ovat USB-laitteiden liittämistä varten, esim. näppäimistö/hiiri, USB-tikku jne. 9. Ohjainpainikkeet. 1.3.
GamePluspäävalikko GamePlus — GamePlus — Crosshair (Tähtäin) Timer (Ajastin) GamePlus GamePlus GamePlus — FPS counter (FPS-laskuri) GamePlus GamePlus FPS Crosshair (Practice Mode) Timer FPS FPS Counter Display Alignment NEXT 1.3.4 BACK/EXIT NEXT BACK/EXIT NEXT BACK/EXIT NEXT BACK/EXIT GameVisual-toiminto GameVisual-toiminto auttaa valitsemaan eri kuvatiloja mukavalla tavalla. Aktivoi GameVisual: 1. Paina GameVisual -oikopolkupainiketta 2. Liikuta 3. Paina 4.
• MOBA Mode: Tämä on paras valinta monen pelaajan verkkotaistelupelien pelaamiseen GameVisual™ Video intelligence -tekniikalla. • User Mode (Käyttäjä-tila): Useammat kohteet ovat säädettävissä Color (Väri) -valikossa. 1.3.5 • • Seuraavat toiminnot eivät ole käyttäjän määritettävissä Racing/MOBAtilassa: ASCR, Saturation (Värikylläisyys). • Seuraavat toiminnot eivät ole käyttäjän määritettävissä sRGB-tilassa: Color Temp.
ROG Strix XG27UQ -sarjan LCD-pelinäyttö 1-7
1-8 Luku 1: Tuotteen esittely
2.1 Näytön varren/jalustan kokoaminen 1. Aseta jalusta varteen. 2 Kiinnitä jalusta varteen kiinnittämällä nippuruuvi. 3. XG27UQR: Kiinnitä LED-projisointisuojus jalustaan. XG27UQ 1 2 XG27UQR Suosittelemme peittämään pöydän pinnan pehmeällä kankaalla estääksesi näytön vaurioitumista. LED-projisointisuojuksen kalvon vaihto alla olevan kuvan mukaisesti.
2.2 Kaapelien hallinta Voit järjestää kaapelit kaapelin tulo/lähtöportin kannen avulla. • Kaapelien järjestäminen XG27UQ • Tulo/lähtöportin käyttö: nämä suojukset voidaan kiinnittää ja irrottaa. XG27UQ 2.3 2-2 XG27UQR XG27UQR Näytön säätäminen • Parhaaksi katselukulmaksi suositellaan näytön koko tasoa, säädä sitten näytön kulmaa haluamasi mukaan. • Pidä kiinni jalustasta näytön kulmaa säätäessäsi, ettei se putoa.
XG27UQ -5° ~ +20° 120mm 40° 40° 0° XG27UQR -5° ~ +20° 100mm 25° 25° 0° On normaalia, että näyttö tärisee hieman katselukulmaa säädettäessä. Näytön kääntäminen (XG27UQ) 1. Nosta näyttöä korkeimpaan kohtaan. 2 Nosta näyttöä sen maksimikulmaan. 3. Käännä näyttöä myötäpäivään tarvitsemaasi kulmaan. 0° -5° ~ +20° 90° 0° 90° On normaalia, että näyttö tärisee hieman katselukulmaa säädettäessä.
2.4 Varren irrottaminen (VESA-seinäkiinnitys) Tämän näytön irrotettava jalusta on suunniteltu varta vasten VESAseinäkiinnitykselle. Varren irrotus: 1. Aseta näytön etupuolin alaspäin pöydälle. 2. Poista suojat kohdista, joissa näyttö ja varsi kohtaavat. 3. Irrota neljä ruuvia näytön takaa ja poista varsi/jalusta. 1 2 XG27UQ 3 4 5 XG27UQR Suosittelemme peittämään pöydän pinnan pehmeällä kankaalla estääksesi näytön vaurioitumista.
2.5 Kaapeleiden liittäminen Liitä kaapelit ohjeiden mukaisesti: XG27UQ XG27UQR • • Yhdistä virtajohto: a. Yhdistä virtasovitin tiukasti näytön DC-tuloon. b. Kytke virtajohdon toinen pää virtasovittimeen, ja kytke toinen pää pistorasiaan. Yhdistä DisplayPort/HDMI-kaapeli: a. Kytke DisplayPort/HDMI-kaapelin toinen pää näytön DisplayPort/HDMIporttiin. b. Yhdistä DisplayPort/HDMI-kaapelin toinen pää tietokoneesi DisplayPort/ HDMI-porttiin.
2-6 Luku 2: Asetukset
3.1 Kuvaruutu (OSD) -valikko 3.1.1 Uudelleenmääritys DisplayPort-1 3840x2160@144Hz Racing Mode Aura Breathing ROG Strix XG27U HDR OFF Gaming OD Image Adaptive-Sync (DP) Color ELMB Input Select GamePlus Lighting Effect GameVisual MyFavorite Shadow Boost System Setup BACK MOVE/ENTER 1. Paina 2. Siirrä ( ) painiketta ylös/alas navigoidaksesi toimintojen läpi. Korosta haluttua toimintoa ja paina ( ) -painiketta sen aktivoimiseksi.
• Adaptive-Sync (DP)/ Variable Refresh Rate: Mahdollistaa Adaptive-Sync tuettujen* grafiikkalähteen säätävän dynaamisesti virkistystaajuutta perustuen tyypilliseen sisällön kehysnopeuksiin tehokkaan, virtuaalisesti tärinättömän ja alhaisen latenssin näytön päivityksen. Adaptive-Sync (DP)/ Variable Refresh Rate aktivoimiseksi sammuta ELMB ensin. Adaptive-Sync (DP)/ Variable Refresh Rate voidaan aktivoida vain alueella 48 Hz~120 Hz HDMI:lle ja 48 Hz~144 Hz DisplayPortille.
• ASCR: Kytkee ASCR (ASUS Smart Contrast Ratio) -toiminnon päälle/pois. Tämä toiminto ei ole saatavilla (aseta OFF (POIS)) kun Dynamic Dimming (Dynaaminen himmennys) on käytössä. • Aspect Control (Kuvasuhteen hallinta): Säätää kuvasuhteeksi Full (Täysi) tai 4:3. • Blue Light Filter (Sinisen valon suodatin): • Taso 0: Ei muutosta. • Taso 1~4: Mitä korkeampi taso, sitä vähemmän sinistä valoa siroaa.
• Gamma: Voit asettaa väritilaksi 2,5, 2,2 tai 1,8. • Saturation (Värikylläisyys): Säätöalue on 0-100. 4. Input Select (Tulon valinta) Tässä toiminnossa voit valita halutun tulolähteen. DisplayPort-1 3840x2160@144Hz Racing Mode Aura Breathing ROG Strix XG27U HDR OFF Gaming HDMI-1 Image HDMI-2 Color DisplayPort-1 Input Select DisplayPort-2 Lighting Effect MyFavorite System Setup BACK MOVE/ENTER 5.
6. MyFavorite DisplayPort-1 3840x2160@144Hz Racing Mode Aura Breathing ROG Strix XG27U HDR OFF Gaming Shortcut Image Customized Setting Color Input Select Lighting Effect MyFavorite System Setup BACK MOVE/ENTER • EXIT Shortcut (Oikopolku): • Shortcut 1 (Oikopolku 1)/Shortcut 2 (Oikopolku 2): Asettaa pikakuvaketoiminnot pikapainikkeille. Kun tietty toiminto on valittu tai aktivoitu, pikanäppäintä ei ehkä tueta.
3-6 • Power Indicator (Virran merkkivalo): Kytkee virran LED-merkkivalon päälle/pois päältä. • Power Key Lock (Virta päällä lukitus): Ottaa virtapainikkeen käyttöön tai pois käytöstä. • Key Lock (Näppäinlukko): Ota kaikki toimintopainikkeet pois käytöstä. Paina yli 5 sekuntia peruuttaaksesi näppäinlukitustoiminnon. • OSD Setup (OSD-asetukset): • Säätää OSD-aikakatkaisua 10-120 sekuntia. • Ottaa DDC/CI-toiminnon käyttöön/pois käytöstä. • Säätää OSD-taustaa läpikuultamattomasta läpinäkyväksi.
3.2 Aura Armoury Crate on ohjelmisto, joka ohjaa värikkäitä LED-valoja tuetuissa laitteissa, kuten näytöissä, emolevyissä, näytönohjaimissa, pöytäkoneissa jne. Auralla näissä laitteissa voidaan säätää RGB LEDien väriä ja valita eri valotehosteita. Voit myös korjata tai säätää LEDien väriä kalibroimalla ne. Auran aktivointi: 1. Kytke Aura Sync -toiminto kohtaan ON (PÄÄLLÄ) OSD-valikossa. 2. Liitä USB 3.0 näytön ylävirran portti tietokoneesi USB-porttiin. 3.
3.3 Teknisten tietojen yhteenveto Paneelin tyyppi Paneelin koko Max. resoluutio Pikselien korkeus Kirkkaus (tyypillinen) Kontrastisuhde (tyypillinen) Katselukulma (V/P) CR>10 Näyttövärit Vasteaika Värilämpötilan valinta Analoginen tulo Digitaalinen tulo Kuulokejakki Äänitulo Kaiutin (sisäänrakennettu) USB 3.
Mitat (W x H x D) Paino (arv.
3.
XG27UQR ROG Strix XG27UQ -sarjan LCD-pelinäyttö 3-11
3.5 Vianetsintä (FAQ) Ongelma Mahdollinen ratkaisu Virran LED-valo ei pala • Paina -painiketta tarkistaaksesi, onko näyttö PÄÄLLÄ -tilassa. • Tarkista, onko virtajohto liitetty oikein näyttöön ja pistorasiaan. Virran LED palaa valkoisena, eikä • Tarkista ovatko näyttö ja tietokone päällä. näytössä näy kuvaa • Varmista, että signaalikaapeli liitetty tiukasti näyttöön ja tietokoneeseen. • Tarkista signaalikaapeli ja varmista, ettei yksikään nasta ole taipunut.
3.
Vaakapikselit Pystypikselit Kuvanopeus 1280 720P 50 1280 720P 60 1440 480P 60 1440 576P 50 1920 1080P 50 1920 1080P 60 1920 1080P 120 3840 2160 50 3840 2160 60 Vaakapikselit Pystypikselit Kuvanopeus HDMI PC-ajastus 3-14 640 480 60 640 480 67 640 480 72 640 480 75 720 400 70 800 600 56 800 600 60 800 600 72 800 600 75 1024 768 60 1024 768 70 1024 768 75 1152 864 75 1280 720 60 1280 960 60 1280 1024 60 1280 1024 75 1440 900
Vaakapikselit Pystypikselit Kuvanopeus Videoajastus 640 480P 60 720 480P 60 720 576P 50 1280 720P 50 1280 720P 60 1440 480P 60 1440 576P 50 1920 1080i 50 1920 1080i 60 1920 1080P 50 1920 1080P 60 1920 1080P 120 3840 2160 50 3840 2160 60 *Ottaaksesi käyttöön 3840x2160@144Hz:n DSC:llä käytä GTX20xx uudempaa tai AMD 5700 uudempaa näytönohjaimia. Jos DSC-toimintoa ei voi ottaa käyttöön, ota yhteyttä GPU/laitteistovalmistajiin saadaksesi tarkempia tietoja.
3-16 Luku 3: Yleisohjeet
ROG Strix XG27UQ -sarjan LCD-pelinäyttö 3-17
3-18 Luku 3: Yleisohjeet