Erste Ausgabe Oktober 2019 Copyright © 2019 ASUSTeK COMPUTER INC. Alle Rechte vorbehalten. Kein Teil dieser Anleitung, inklusive der hierin beschriebenen Produkte und Software, darf ohne ausdrückliche schriftliche Genehmigung der ASUSTeK COMPUTER INC. („ASUS“) auf irgendeine Weise oder Form reproduziert, übertragen, transkribiert, in Abrufsysteme gespeichert oder in eine andere Sprache übersetzt werden, außer in Form einer im Besitz des Käufers verbleibenden Sicherheitskopie.
Inhaltsverzeichnis Hinweise....................................................................................................... iv Hinweise zu Ihrer Sicherheit........................................................................ v Pflegen & Reinigen...................................................................................... vi Rücknahmeservices................................................................................... vii Kapitel 1: Übersicht über das Produkt 1.1 Willkommen! .
Hinweise Erklärung der Federal Communications Commission Dieses Gerät erfüllt Teil 15 der FCC-Regularien. Der Betrieb unterliegt den folgenden beiden Voraussetzungen: • Dieses Gerät darf keine Funkstörungen verursachen, und • Dieses Gerät muss jegliche empfangenen Funkstörungen hinnehmen, einschließlich Störungen, die zu unbeabsichtigtem Betrieb führen können. Dieses Gerät wurde getestet und als mit den Grenzwerten für Digitalgeräte der Klasse B gemäß Teil 15 der FCC-Regularien übereinstimmend befunden.
Hinweise zu Ihrer Sicherheit • Lesen Sie sorgfältig die mitgelieferte Dokumentation durch, bevor Sie beginnen, den Monitor einzurichten. • Setzen Sie den Monitor weder Regen noch Feuchtigkeit aus, um einen Brand oder elektrischen Schlag zu vermeiden. • Versuchen Sie niemals das Monitorgehäuse zu öffnen. Die gefährliche Hochspannung innerhalb des Monitors kann ernsthafte Verletzungen verursachen. • Falls das Netzteil defekt ist, versuchen Sie es nicht in eigener Regie zu reparieren.
• Das Netzteil ist nur für diesen Monitor geeignet, nicht für andere Zwecke verwenden. Ihr Gerät nutzt eine der folgenden Stromversorgungen: - Hersteller: Delta Electronics Inc., Modell: ADP-90YD B / ADP-90LE B Das Symbol mit einer durchgestrichenen Abfalltonne auf Rädern bedeutet, dass das Produkt (elektrisches und elektronisches Gerät oder quecksilberhaltige Knopfzelle) nicht mit dem Hausmüll zusammen entsorgt werden darf.
Darstellungssystematik in dieser Anleitung WARNUNG: Hier finden Sie wichtige Hinweise, um Verletzungen während des Ausführens einer Aufgabe zu vermeiden. VORSICHT: Hier finden Sie wichtige Hinweise, um Schäden an Komponenten während des Ausführens einer Aufgabe zu vermeiden. WICHTIG: Hier finden Sie wichtige Hinweise, die Sie beachten MÜSSEN, um eine Aufgabe fertig zu stellen. HINWEIS: Hier finden Sie Tipps und zusätzliche Informationen, die das Ausführen einer Aufgabe erleichtern.
viii
1.1 Willkommen! Vielen Dank für den Kauf des ROG Gaming Monitors! Der aktuellste Breitbild-LCD-Monitor von ASUS bietet ein breiteres, helleres und kristallklares Bild sowie eine Vielzahl weiterer Funktionen, welche die Arbeit mit diesem Produkt zum Vergnügen machen. Durch diese Funktionen können Sie die Bequemlichkeit und das wunderbare visuelle Erlebnis des Monitors genießen! 1.
1.3 Einführung zum Monitor 1.3.1 Frontansicht XG27UQ 1 2 3 4 5 XG27UQR 1. ( 5-Wege) Taste: • Zum Einschalten des OSD-Menüs. Bestätigt die ausgewählte OSDMenüoption. • Erhöht/verringert Werte und navigiert bei der Auswahl nach oben/unten/ links/rechts. • Aktiviert das OSD-Menü, wenn der Monitor den Standbymodus aufruft oder die “KEIN SIGNAL” Meldung angezeigt wird. 2. Taste • Beendet die OSD-Menüoption.
4. Verknüpfung 2 Taste: • Standard: GameVisual. • Wählen Sie zum Ändern der Verknüpfungsfunktion das Menü MyFavorite > Verknüpfung > Verknüpfung 2. • Aktiviert das OSD-Menü, wenn der Monitor den Standbymodus aufruft oder die “KEIN SIGNAL” Meldung angezeigt wird. 5. Stromschalter/Betriebsanzeige • Mit diese Taste schalten Sie den Bildschirm ein/aus. • Die folgende Tabelle zeigt die Bedeutung der Farben der Betriebsanzeige. 1.3.
3. Kopfhöreranschluss. Dieser Anschluss steht nur zur Verfügung, wenn ein HDMI-/DisplayPort-Kabel angeschlossen ist. 4. HDMI-1 Anschluss. Dieser Port dient dem Anschließen eines HDMI 2.0 kompatiblen Geräts. 5. HDMI-2 Anschluss. Dieser Port dient dem Anschließen eines HDMI 2.0 kompatiblen Geräts. 6. DisplayPort. Dieser Port dient dem Anschließen eines DisplayPortkompatiblen Gerätes. 7. USB 3.0 Upstream-Port. Dieser Port dient der Verbindung mit einem USBUpstream-Kabel.
4. Markieren Sie die gewünschte Einstellung und drücken Sie auf die Taste, um sie zu aktivieren. Drücken Sie auf die Taste, um sie zu deaktivieren. GamePlus Hauptmenü GamePlus — Fadenkreuz GamePlus — Timer GamePlus GamePlus ( ) GamePlus — FPS Zähler GamePlus GamePlus FPS Crosshair (Practice Mode) Timer FPS FPS Counter Display Alignment NEXT 1.3.
• Kinomodus: Dies ist die beste Auswahl für das Ansehen von Filmen mit GameVisualTM intelligenter Videotechnologie. • RTS/RPGmodus: Dies ist die beste Auswahl für Echtzeitstrategie (RTS)/ Rollenspiele (RPG) mit GameVisualTM intelligenter Videotechnologie. • FPSmodus: Dies ist die beste Auswahl für das Spielen von Egoshootern mit GameVisualTM intelligenter Videotechnologie. • sRGBmodus: Dies ist die beste Auswahl für die Anzeige von Fotos und Grafiken von PCs.
ROG Strix XG27UQ Serie Gaming LCD Monitor 1-7
1-8 Kapitel 1: Übersicht über das Produkt
2.1 Anbringen des Monitorarms/- fußes 1. Bringen Sie den Arm am Fuß an. 2 Sichern Sie den Monitorfuß mit Hilfe der mitgelieferten Schraube am Halter. 3. XG27UQR: Befestigen Sie die LED Projektionsabdeckung am Ständer. XG27UQ 1 2 XG27UQR Wir empfehlen Ihnen ein weiches Tuch auf den Tisch zu legen, um Schäden an dem Monitor zu vermeiden. Folgen Sie der unten stehenden Abbildung, um die Folie an der LED Projektionsabdeckung auszutauschen.
2.2 Kabelverwaltung Sie können die Kabel mit Hilfe der Abdeckung des Ein-/Ausgangsports organisieren. • Verlegung der Kabel XG27UQ • Verwendung der Abdeckung der Ein-/Ausgangsbuchse: Diese Abdeckung kann angebracht oder entfernt werden. XG27UQ 2.3 2-2 XG27UQR XG27UQR Anpassen des Bildschirms • Schauen Sie bitte auf die volle Fläche des Bildschirms und passen die Position des Bildschirms an, um einen optimalen Blickwinkel zu erhalten.
XG27UQ -5° ~ +20° 120mm 40° 40° 0° XG27UQR -5° ~ +20° 100mm 25° 25° 0° Beim Einstellen des Betrachtungswinkels ist es normal, dass Monitor und Bild etwas wackeln können. Schwenken des Monitors (XG27UQ) 1. Heben Sie den Monitor auf die höchste Position an. 2 Kippen Sie den Monitor zum maximalen Winkel. 3. Schwenken Sie den Monitor im Uhrzeigersinn zum gewünschten Winkel.
2.4 Abnehmen des Halters (für VESAWandmontage) Der Halter des Monitors kann zur VESA-Wandmontage abgenommen werden. So nehmen Sie Arm/Basis ab: 1. Legen Sie den Monitor mit dem Bildschirm nach unten zeigend auf einen Tisch. 2. Entfernen Sie die Abdeckungen, an denen sich der Monitor und der Arm treffen. 3. Platzieren Sie den Monitor mit der Bildschirmseite nach unten auf einem Tisch.
2.5 Anschließen der Kabel Schließen Sie die Kabel gemäß den nachstehenden Anweisungen an: XG27UQ XG27UQR • • So schließen Sie das Netzkabel an: a. Schließen Sie das Netzteil sicher am DC-Eingang des Monitors an. b. Verbinden Sie ein Ende des Netzkabels mit dem Netzteil und das andere Ende mit einer Steckdose. So schließen Sie das DisplayPort/HDMI an: a. Verbinden Sie das eine Ende des DisplayPort/HDMI-Kabels mit dem DisplayPort/HDMI-Anschluss des Monitors. b.
2.6 Einschalten des Monitors Drücken Sie die Ein-/Austaste . Siehe Seite 1-2 für die Position des Stromschalters. Die Betriebsanzeige leucht weiß, wenn der Monitor EIN geschaltet ist.
ROG Strix XG27UQ Serie Gaming LCD Monitor 2-7
2-8 Kapitel 2: Einrichtung
3.1 Bildschirmmenü (OSD-Menü) 3.1.1 Bedienungsvorgang DisplayPort-1 3840x2160@144Hz Rennmodus Aura Breathing ROG Strix XG27U HDR OFF Gaming OD Bildeinrichtung Adaptive-Sync (DP) Farbe ELMB Eingangswahl GamePlus Lichteffekt GameVisual MyFavorite Shadow Boost System-Einstellungen BACK MOVE/ENTER 1. Drücken Sie die 2. Drücken Sie die ( ) Taste nach oben/unten, um durch die Funktionen zu steuern. Heben Sie die gewünschte Funktion hervor; drücken Sie zum Aktivieren dieser auf die ( ) Taste.
• OD: Verbessert die Graustufen-Reaktionszeit der LCD-Fläche. Diese Funktion ist nicht verfügbar, wenn ELMB aktiviert ist. • Adaptive-Sync (DP)/ Variable Refresh Rate: Ermöglicht einer AdaptiveSync unterstützten* Grafikkarte die dynamische Anpassung der Bildschirmaktualisierungsrate basierend auf typischen Inhaltsbildraten für eine energiesparende, praktisch ruckelfreie Anzeigeaktualisierung mit geringer Latenz.
• HDR: Bietet zwei HDR Modi. • ASUS Gaming HDR: Dies ist der HDR Modus, den ASUS speziell für HDR Leistung angepasst hat. • ASUS Cinema HDR: Entspricht VESA Display HDR. • Dynamisches Dimmen: Synchronisiert sich mit dem Inhalt, während der Kontrast geändert wird, um die Hintergrundbeleuchtung dynamisch zu dimmen. • ASCR: Hier können Sie die Funktion ASCR (ASUS Smart Contrast Ratio) ein-/ ausschalten. Diese Funktion ist nicht verfügbar (auf AUS gestellt) wenn Dynamisches Dimmen aktiviert ist.
3. Farbe DisplayPort-1 3840x2160@144Hz Rennmodus Aura Breathing ROG Strix XG27U HDR OFF Gaming Farbtemp. Bildeinrichtung Gamma Farbe Sättigung Eingangswahl Lichteffekt MyFavorite System-Einstellungen BACK MOVE/ENTER EXIT • Farbtemp.: Enthält die 4 Modi Kühl, Normal, Warm und Anwendermodus. • Gamma: Ermöglicht Ihnen die Einstellung des Farbmodus auf 2,5, 2,2, oder 1,8. • Sättigung: Der Einstellbereich reicht hier von 0 bis 100. 4.
• Aura RGB: Es stehen 6 Farben zur Auswahl: Rainbow (Regenbogen), Color Cycle (Farbzyklus), Static (Statisch), Breathing (Blinkend), Strobing (Flackernd), AUS. Sie können die R/G/B/C/M/Y Farbe für die Static (Statisch), Breathing (Blinkend) und Strobing (Flackernd) Modi manuell ändern. Diese Funktion ist nicht verfügbar, wenn Aura Sync aktiviert ist. • 6. LICHT IN BEWEGUNG (nur XG27UQ): Wählt die Helligkeitsstufe des Lichts am Ständer aus.
• • Klang: Über dieses Menü passen Sie die Toneinstellung an. • Lautstärke: Der Einstellbereich reicht hier von 0 bis 100. • Stummschalten: Schaltet den Ton des Monitors ein oder aus. USB-Hub: Schaltet die USB Hub Funktion im Standbymodus Ein/Aus. Diese Funktion ist nicht verfügbar (auf Ein im Standby gestellt) wenn Aura Sync aktiviert ist. 3-6 • Betriebsanzeige: Hiermit de-/aktivieren Sie die Betriebsanzeige-LED. • Ein-/Austaste-Sperre: Aktiviert oder deaktiviert die Ein/Aus-Taste.
3.2 Aura Armoury Crate ist ein Softwareprogramm, das die bunten LEDs auf unterstützten Geräten wie Monitoren, Motherboards, Grafikkarten, Desktop-PCs usw. steuert. Aura ermöglicht es Ihnen, die Farbe der RGB-LEDs an diesen Geräten anzupassen und verschiedene Lichteffekte auszuwählen. Sie können auch die Farbe der LEDs korrigieren oder anpassen, indem Sie sie kalibrieren. Um Aura zu aktivieren: 1. Schalten Sie die Aura Sync Funktion im OSD-Menü EIN. 2. Verbinden Sie den USB 3.
3.3 Technische Daten Bildschirmtyp Bildschirmgröße Max. Auflösung Pixelabstand Helligkeit (i.d.R.) Kontrastverhältnis (i.d.R.) Betrachtungswinkel (H/V) CR>10 Anzeigefarben Ansprechzeit Farbtemperaturauswahl Analoger Eingang Digitaleingang Kopfhörerbuchse Audioeingang Lautsprecher (Integriert) USB 3.
Abmessungen (B x H x T) Gewicht (ungefähr) Mehrsprachige Menüanzeige Zubehör Konformität und Normen XG27UQ: 633,64 x 436,54 x 269,546 mm (niedrigste) 633,64 x 556,54 x 269,546 mm (höchste) 731 x 275 x 495 mm (Verpackung) XG27UQR: 633,64 x 422,36 x 254,5 mm (niedrigste) 633,64 x 522,36 x 254,5 mm (höchste) 727 x 263 x 606 mm (Verpackung) XG27UQ: 7,5 kg (Netto); 10,7 kg (Brutto) XG27UQR: 8,0 kg (Netto); 12,0 kg (Brutto) 21 Sprachen (Englisch, Französisch, Deutsch, Italienisch, Spanisch, Niederländisch, Po
3.
XG27UQR ROG Strix XG27UQ Serie Gaming LCD Monitor 3-11
3.5 Fehlerbehebung (Häufig gestellte Fragen) Problem Mögliche Lösung Die Betriebs-LED leuchtet nicht • Drücken Sie die Taste, um zu überprüfen, ob der Monitor eingeschaltet ist. • Prüfen Sie, ob das Netzkabel richtig mit dem Monitor und der Steckdose verbunden ist. Die Betriebs-LED leuchtet weiß und • Prüfen Sie, ob der Monitor sowie der Computer kein Bild erscheint im normalen Betriebszustand ist. • Stellen Sie sicher, dass das Signalkabel richtig mit dem Monitor und dem Computer verbunden ist.
3.
Horizontale Pixel Vertikale Pixel Bildrate 1280 720P 50 1280 720P 60 1440 480P 60 1440 576P 50 1920 1080P 50 1920 1080P 60 1920 1080P 120 3840 2160 50 3840 2160 60 Horizontale Pixel Vertikale Pixel Bildrate HDMI PC-Timing 3-14 640 480 60 640 480 67 640 480 72 640 480 75 720 400 70 800 600 56 800 600 60 800 600 72 800 600 75 1024 768 60 1024 768 70 1024 768 75 1152 864 75 1280 720 60 1280 960 60 1280 1024 60 1280 1024 75 14
Horizontale Pixel Vertikale Pixel Bildrate Video-Timing 640 480P 60 720 480P 60 720 576P 50 1280 720P 50 1280 720P 60 1440 480P 60 1440 576P 50 1920 1080i 50 1920 1080i 60 1920 1080P 50 1920 1080P 60 1920 1080P 120 3840 2160 50 3840 2160 60 *Um 3840x2160@144Hz mit DSC zu aktivieren, verwenden Sie bitte GTX20xx oder AMD 5700 Grafikkarten oder höher.
3-16 Kapitel 3: Allgemeine Hinweise
ROG Strix XG27UQ Serie Gaming LCD Monitor 3-17
3-18 Kapitel 3: Allgemeine Hinweise