Första upplagan Maj 2017 Copyright © 2017 ASUSTeK COMPUTER INC. Med ensamrätt. Ingen del av denna manual, inklusive de produkter och den programvara som beskrivshäri, får återges, överföras, transkriberas, lagras i ett återvinningssystem eller översättas till något språk i någon form eller på något sätt, förutom dokumentationen som förvaras av köparen för säkerhetskopieringsändamål, utan skriftligt tillstånd från ASUSTeK COMPUTER INC. (“ASUS”).
Innehållsförteckning Notices................................................................. iv Säkerhetsinformation........................................ v Underhåll och rengöring...................................vii Återvinningstjänster........................................viii 1.1 Välkommen!.............................................. 1-1 1.2 Paketets innehåll................................... 1-1 1.3 Montering av skärmens arm/bas...... 1-2 1.4 Ansluta kablar.....................................
Notices Federal Communications Commission Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: • This device may not cause harmful interference, and • This device must accept any interference received including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
Canadian Department of Communications Statement This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus set out in the Radio Interference Regulations of the Canadian Department of Communications. This class B digital apparatus complies with Canadian ICES-003.
vi • Skärmen bör endast användas med den typ av strömkälla som anges på etiketten. Om du är osäker på vilken typ av strömförsörjning du har i din bostad, fråga din återförsäljare eller det lokala elbolaget. • Använd en lämplig strömkontakt som stämmer överens med din lokala strömstandard. • Överbelasta inte förgreningsdosor och förlängningssladdar. Överbelastning kan leda till brand eller elektriska stötar. • Undvik damm, fukt och extrema temperaturer.
Underhåll och rengöring • Innan du lyfter eller flyttar skärmen är det bättre att koppla bort kablarna och nätsladden. Följ rätt lyftteknik när du placerar skärmen. När du lyfter eller bär skärmen ta tag i skärmens kanter. Lyft inte skärmen genom stativet eller sladden. • Rengöring. Stäng av skärmen och dra ut strömkabeln. Rengör skärmens yta med en luddfri, mjuk trasa. Envisa fläckar kan tas bort med en fuktig trasa och milt rengöringsmedel.
Konventioner som används i den här bruksanvisningen VARNING! Information för att förhindra att skada dig själv när du försöker slutföra en uppgift. FÖRSIKTIGHET! Information för att förhindra att skada komponenterna när du försöker slutföra en uppgift. VIKTIGT! Information som du MÅSTE följa för att slutföra en uppgift. OBS! Tips och ytterligare information för att underlätta att slutföra en uppgift.
1.1 Välkommen! Tack för att ha köpt en ASUS® LCD-skärm! Den senaste bredbild LCD-skärmen från ASUS ger en skarpare, bredare och ljusare skärm, plus en mängd funktioner som förbättrar tittarupplevelsen. Med dessa funktioner kan du njuta av bekvämligheten och den härliga visuella upplevelsen som skärmen ger dig! 1.
1.3 Montering av skärmens arm/bas •• 1-2 Vid montering av skärmens arm/fot rekommenderar vi att du förvarar skärmen inuti dess EPS (expanderad polystyren) förpackning. 1. Passa in armens skruvhål på foten med den medföljande skruven. Sätt sedan in foten i armen. 2. Sätt fast foten till armen genom att skruva fast den medföljande skruven. 3. Passa in triangelmärkena på skärmens fot och LEDprojektionsluckan. Sätt sedan fast LED-projektionsluckan på skärmens fot. 4.
1.4 Ansluta kablar 1.4.1 LCD-skärmens baksida 1 2 DVI HDMI 5 6 4 7 3 8 1. Kontrollknappar 5. DVI-port* 2. Hantering av kablar 6. HDMI-port 3. Kensington-lås 7. DisplayPort 4. Hörlursuttag 8. DC-IN-port • *DVI-porten stöder både DVI-D Single Link-kabel och DVI-D Dual Link-kabel: DVI-D Single Linkkabelkontakt • DVI-D Dual Linkkabelkontakt Endast DVI-D Dual Link-kabeln stöder upplösningen 1920x1080@144Hz.
1.5 Inledning 1.5.1 Använda kontrollknapparna Använd kontrollknapparna på sidan av skärmen för att justera bildinställningarna. Tryck på knappen 1-5 för att aktivera sidan med nyckellistan. 1 2 3 4 5 6 1. ( • Slå på skärmmenyn. Aktivera det valda skärmmenyalternativet. • Öka/minska värden eller flytta ditt val uppåt/neråt/vänster/ höger. 2. Stäng-knapp: • Stäng OSD-menyn. • Slå på skärmmenyn när skärmen går in i viloläge eller visar meddelandet "NO SIGNAL" (ingen signal). 3.
4. GameVisual-knapp: • Tryck på den här snabbtangenten för att växla från åtta förinställda lägen för video (Scenery Mode (scenläge), Racing Mode (racingläge), Cinema Mode (bioläge), RTS-/RPG-läge, FPSläge, sRGB-läge, MOBA-läge och User Mode (användarläge)) med GameVisual™ Video Intelligence-teknik. • Slå på skärmmenyn när skärmen går in i viloläge eller visar meddelandet "NO SIGNAL" (ingen signal). 5. Strömknapp: • 6. Tryck på den här knappen för att slå på/stänga av skärmen.
4. Markera önskad inställning och tryck på ( ) knappen för att aktivera den. Tryck på knappen för att avaktivera den.
1.5.3 GameVisual-funktion Funktionen GameVisual hjälper dig att välja mellan olika bildlägen på ett bekvämt sätt. För att aktivera GameVisual: Tryck på snabbtangenten GameVisual flera gånger för att välja. • Scenery Mode (Landskapsläge): Detta är det bästa valet för landskapsfoto som visas med GameVisual TM Video intelligence Technology. • Racing Mode (Racingläge): Detta är det bästa valet för racingspel med GameVisualTM Video intelligence Technology.
2.1 Avmontera stativet (för VESAväggmontering) •• Undvik skador på bildskärmens yta. När du tar bort bildskärmsstativet håll alltid skärmen i dess EPS-förpackning. Det avtagbara stativet på denna bildskärm är speciellt utformat för VESAväggmontering. 2-1 1. Koppla bort ström- och signalkablarna. Placera skärmen vänd nedåt på dess EPS-förpackning. 2. Ta bort locket där skärmen och armen möts. 3. Ta bort de fyra skruvarna (4) som håller fast armen på skärmens baksida. 4.
• • VESA väggmonteringssats (100 x 100 mm) köps separat. Använd endast UL-märkta väggmonteringsfästen med minsta vikt/last på 22,7 kg (Skruvstorlek: M4 x 15 mm). 2.2 Justera skärmen • För optimal visning rekommenderar vi att du tittar rakt framför skärmen och sedan justerar skärmen till den vinkel som är bekvämast för dig. • Håll i stativet för att förhindra att skärmen faller när du byter vinkeln.
3.1 OSD (On-Screen Display)-meny 3.1.1 Hur man konfigurerar om DisplayPort 1920x1080@ 144Hz Racing Mode Aura Off ROG Strix XG27VQ GameVisual Scenery Mode Blue Light Filter Racing Mode Color Cinema Mode Image RTS/RPG Mode Input Select FPS Mode System Setup sRGB Mode MyFavorite MOBA Mode User Mode MOVE/ENTER 3-2 ( BACK EXIT 1. Tryck på )-knappen för att aktivera OSD-menyn. 2. Flytta ( ) knappen uppåt/neråt för att navigera genom funktionerna.
3.1.2 Inledning till OSD-funktion 1. GameVisual Denna funktion innehåller åtta underfunktioner som du kan välja enligt dina önskemål. Mer information finns på page 1-7. DisplayPort 1920x1080@ 144Hz Racing Mode Aura Off ROG Strix XG27VQ GameVisual Scenery Mode Blue Light Filter Racing Mode Color Cinema Mode Image RTS/RPG Mode Input Select FPS Mode System Setup sRGB Mode MyFavorite MOBA Mode User Mode BACK MOVE/ENTER EXIT 2.
• När Blue Light Filter (blåljusfilter) är aktiverat, kommer standardinställningarna för Racing Mode (racingläge) att importeras automatiskt. Mellan nivå 1 till nivå 3 kan ljusstyrka-funktionen inte konfigureras av användaren. Nivå 4 är optimerad inställning. Det överensstämmer med TUV lågt blått ljus certifiering. Ljusstyrka-funktionen kan inte konfigureras av användaren. • • Se följande för att lindra påfrestningar för ögonen: • Användare bör ta pauser om de arbetar under en längre tid vid skärmen.
• Contrast (Kontrast): Justera kontrastnivån. Justeringsintervallet är från 0 till 100. • Saturation (Mättnad): Justera mättnadsnivån. Justeringsintervallet är från 0 till 100. • Color Temp. (Färgtemperatur): Välj önskad färgtemperatur. Tillgängliga alternativ: Kall, Normal, Varm och Användarläge. •• • I användarläge kan färgerna R (rött), G (grönt) och B (blått) konfigureras av användaren. Justeringsintervallet är från 0 till 100. Gamma: Gör att du kan ställa in färgläget till 1.8, 2.2 eller 2.5.
•• • Om Adaptive-Sync/FreeSync är aktiverad tonas ELMB-funktionen ner. Adaptive-Sync/FreeSync: Gör att en anpassad synkroniserad eller FreeSync-stödd grafikkälla (HDMI och DisplayPort) kan dynamiskt justera visningsuppdateringshastigheten baserat på typiska innehållsramar för en energieffektiv och praktisk taget utan hack visning med låg latens. •• Om Adaptive-Sync/FreeSync är aktiverad tonas ELMB-funktionen ner. 5. Input Select (Val av inmatning) Välj inmatningskällan.
DisplayPort 1920x1080@ 144Hz Racing Mode Aura Off ROG Strix XG27VQ GameVisual Power Key Lock Blue Light Filter All Reset Color Image Input Select System Setup MyFavorite MOVE/ENTER BACK EXIT (Sida 2/2) • LIGHT IN MOTION (LJUS I RÖRELSE): Ställ in den röda ljusintensitetsnivån på basen från nivå 1 till nivå 3. För att stänga av rött ljus, ställ in nivå 0. • Aura RGB: Ställ in Aura RGB-ljusmönstret på baksidan av skärmen.
7. MyFavorite (Min favorit) Ladda/spara alla inställningar på skärmen.
3.2 Specifikationer Modell XG27VQ 27 tum diagonalt Panelstorlek Ljusstyrka (Typ.) (Active Display Area: 595,303 (H) x 336,312 (V) mm) 1920 (H) x 1080 (V) 300 cd/m2 Kontrastförhållande (Typ.) 3000:1 Betraktningsvinkel (CR≤10) 178°(H)/178°(V) Skärmfärger 16,7 M färger (8 bitar + FRC) 4ms (GTG); 1ms (MPRT) DVI x 1, HDMI x 1, DP x 1 Max.
Modell Tillbehör Efterlevnad och standarder OSD-stöd på flera språk XG27VQ Adapter, nätkabel, snabbstartguide, garantikort, CD med hjälp, HDMI-kabel (tillval), DP-kabel (tillval), LED-projektionsomslag och utbytbara projektionsfilmer (tillval), lock för ingångs-/ utgångsportar CCC, China Energy Label, UL/C-UL, CB, BSMI, CU(EAC), MSIP(KCC), VCCI, FCC, CE RCM, E-Standby, GEMS, KC(EK), TUV lågt blått ljus/utan flimmer, RoHS, WEEE, EuP (endast energispar), Ukr SEPRO, J-MOSS, Windows 7/8.
3.3 Felsökning (FAQ) Problem Ström-LED:en är inte PÅ Möjlig lösning • Tryck på knappen är påslagen. för att kontrollera om skärmen • Kontrollera om adaptern och strömkabeln är ordentligt anslutna till skärmen och eluttaget. • Kontrollera Power Indicator (Strömindikator)funktionen i OSD-menyn. Välj "PÅ" för att slå på ström LED:en. Ström LED:en lyser vitt och det finns ingen skärmbild • Kontrollera om skärmen och datorn är påslagna.
3.4 Timinglista som stöds Primär timing som stöds av dator 3-12 Timinglista DVI HDMI1.4 Displayport 1.
Videotiming Timinglista DVI HDMI1.4 Displayport 1.