User Guide

1-2
Chapter 1: Product Introduction
1.3 Assembling the
Monitor Arm/Base
• While assembling the monitor arm/base, we recommend that you keep the
monitor inside its EPS (Expanded Polystyrene) packaging.
1. Align the screw hole on the arm with the bundled screw on the base. Then
insert the base into the arm.
2. Fix the base to the arm by fastening the bundled screw.
3. Align the triangle marks on the monitor base and the LED projection cover.
Then attach the LED projection cover to the monitor base.
4. Remove the monitor from its EPS packaging.
• Base screw size: M5 x 13 mm