XG32VC MONITEUR DE JEU COURBÉ
Table des matières Avertissements............................................................................................ iii Informations de sécurité............................................................................. iv Soin & Nettoyage....................................................................................... viii 1.1 Bienvenu........................................................................................ 1-2 1.2 Contenu de la boîte.....................................
Avertissements Déclaration de la Commission Fédérale des Télécommunications (FCC) Cet appareil est conforme à la section 15 du règlement de la FCC. L'utilisation est permise sujette aux deux conditions suivantes : • • Cet appareil ne peut pas causer d'interférences nocives. Cet appareil doit pouvoir accepter toutes les interférences reçues, y compris les interférences risquant d’engendrer un fonctionnement indésirable.
Informations de sécurité • • • • • • • • • • • • • • • • • iv Avant d’installer le moniteur, lisez attentivement toute la documentation qui accompagne la boîte. Pour réduire le risque d’incendie ou de choc électrique, n’exposez jamais le moniteur à la pluie ou à l’humidité. N’essayez jamais d’ouvrir le boîtier du moniteur. Les hautes tensions dangereuses à l’intérieur du moniteur peuvent entraîner de graves blessures corporelles.
• • • Veuillez vérifier que le système de distribution de l’installation du bâtiment inclut un disjoncteur de 120/240V, 20A (maximum). Si le cordon d’alimentation est muni d’une fiche de raccordement à 3 broches, branchez la fiche dans une prise de courant à 3 broches reliée à la terre (masse). Ne désactivez pas la broche de mise à la terre du cordon d’alimentation, par exemple en utilisant un adaptateur à 2 broches. La broche de mise à la terre est un dispositif de sécurité important.
• NE placez JAMAIS un produit dans un endroit instable. • NE placez JAMAIS le produit sur des meubles hauts (par exemple des armoires ou des bibliothèques) sans ancrage à la fois du meuble et du produit sur un support approprié. • NE placez JAMAIS le produit sur un tissu ou autre matériau entre le produit et le meuble où il est installé.
Éviter tout renversement Lors de l'utilisation du moniteur, fixez l'écran LCD à un mur à l'aide d'un cordon ou d'une chaîne pouvant supporter le poids du moniteur afin d'empêcher celui-ci de tomber. 1 Vis M4 ou M6 Cordon 2 Cordon ou chaîne • Le design de l'écran peut différer de ceux illustrés. • L'installation doit être effectuée par un technicien qualifié. Veuillez contacter votre fournisseur pour plus d'informations. • Pour les modèles avec un poids net >= 7 kg.
Soin & Nettoyage • Avant de soulever ou de déplacer votre moniteur, il est préférable de débrancher les câbles et le cordon d’alimentation. Suivez les bonnes techniques de levage quand vous soulevez le moniteur. Quand vous soulevez ou transportez le moniteur, tenez les bords du moniteur. Ne soulevez pas le moniteur en tenant le support ou le cordon d’alimentation. • Nettoyage. Éteignez votre moniteur et débranchez le cordon d’alimentation.
Où trouver plus d’informations Référez-vous aux sources suivantes pour les informations supplémentaires et pour les mises à jour de produit et logiciel. 1. Sites Web de ASUS Les sites Web internationaux d’ASUS fournissent des informations mises à jour sur les produits matériels et logiciels d’ASUS. Référez-vous à http://www.asus.com 2. Documentation en option Votre emballage produit peut inclure une documentation en option qui peut avoir été ajoutée par votre revendeur.
1.1 Bienvenu Merci d'avoir acheté un moniteur LCD d'ASUS® ! Le dernier moniteur à écran LCD large d’ASUS offre un affichage plus net, plus large et plus lumineux, en plus de toute une gamme de fonctions qui améliorent votre séance de visionnage. Avec ces fonctions du moniteur, vous pouvez profiter du confort et vous régaler d’une expérience visuelle ! 1.
1.3 Assemblage du moniteur Pour assembler le moniteur : • Lors de l'assemblage du bras/de la base du moniteur, nous vous conseillons de conserver le moniteur dans son emballage en polystyrène expansé (EPS). 1. Alignez le trou de vis sur le bras avec la vis fournie sur la base. Puis insérez la base dans le bras. 2. Fixez la base au bras en serrant la vis fournie. 3. Retirez le moniteur de son emballage EPS. Ajustez le moniteur pour que l'angle soit confortable.
1.4 Branchement des câbles 1.4.1 Arrière du moniteur LCD 9 HDMI 1 1-4 DCIN USB-C/ 2 3 4 1. Port HDMI 2. DisplayPort 3. Port USB C/DP (PD 5V/2A) 4. Prise des écouteurs 5. Port USB3.0 en amont 6. Port USB3.0 en aval 7. Port USB3.0 en aval 8. Port d’entrée CC 9.
1.5 Présentation du moniteur 1.5.1 Utilisation des boutons de contrôle Utilisez les boutons de contrôle à l'arrière du moniteur pour régler les paramètres du moniteur. 6 6 5 5 4 4 3 3 2 2 1 1. Indicateur d’alimentation : • 2. Les couleurs du voyant d’alimentation sont indiquées dans le tableau ci-dessous. État Description Blanc Marche Orange Mode Veille Arrêt Arrêt Bouton d'alimentation : • 3. Appuyez sur ce bouton pour allumer/éteindre le moniteur.
• Appuyez sur le bouton GamePlus pour accéder au menu principal GamePlus. • Activez la fonction Viseur, Minuterie, Compteur de FPS ou Alignement écran • Déplacez le bouton et appuyez sur Appuyez sur • vers le haut/bas pour sélectionner pour confirmer la fonction souhaitée. pour sortir et quitter. Viseur/Minuterie/Compteur de FPS peut être déplacé en appuyant sur la touche 5 directions menu principal GamePlus .
2.1 Réglage du moniteur • Pour une vision optimale, il est recommandé d’avoir une vision de face sur le moniteur, ensuite réglez l’angle du moniteur pour qu’il soit confortable. • Tenez le pied pour empêcher le moniteur de tomber quand vous le changez d’angle. • Vous pouvez ajuster l’angle du moniteur de -3,5˚ à 18,5˚ et le faire pivoter jusqu'à 26˚ vers la droite ou la gauche. Vous pouvez aussi ajuster la hauteur du moniteur à +/- 10 cm. -3.5 ~ 18.
2.
2.3 Détacher le bras / support (pour support mural VESA) • Évitez d'endommager la surface du moniteur. En détachant le support du moniteur, conservez toujours le moniteur dans son emballage EPS. Le bras démontable de ce moniteur est conçu spécialement pour un montage mural VESA. Pour démonter le bras/le support 1. Débranchez les câbles d’alimentation et de signal. Mettez délicatement le moniteur face orientée vers le bas sur son emballage EPS. 2.
3.1 Menu OSD (Affichage à l’écran) 3.1.1 Comment faire pour reconfigurer HDMI 1024x768@ 72Hz Mode Paysage Aura Off ROG Strix XG32VC HDR OFF Jeux Surcadençage Image OD Variable Couleur FreeSync Premium Pro Sélection Entrée ELMB/ELMB SYNC Effet d'éclairage GamePlus GameVisual MyFavorite Configuration Système MOVE/ENTER Shadow Boost BACK EXIT 1. Appuyez sur le bouton central du bouton 5 directions pour afficher le menu OSD. 2.
3.1.2 1. Présentation des fonctions de l'OSD Jeux HDMI 1024x768@ 72Hz Mode Paysage Aura Off ROG Strix XG32VC HDR OFF Jeux Surcadençage Image OD Variable Couleur FreeSync Premium Pro Sélection Entrée ELMB/ELMB SYNC Effet d'éclairage GamePlus GameVisual MyFavorite Configuration Système MOVE/ENTER • • • • • • • • BACK EXIT Surcadençage : Cette fonction vous permet d’ajuster le taux de rafraîchissement. OD Variable : Augmente le temps de réponse avec la technologie Over Drive.
2. Image Vous pouvez modifier Luminosité, Contraste, HDR, VividPixel, ASCR, Contrôle de l'aspect et Filtre de lumière bleue à partir de cette fonction principale. HDMI 1024x768@ 72Hz Mode Paysage Aura Off ROG Strix XG32VC HDR OFF Jeux Luminosité Image Contraste Couleur HDR Sélection Entrée Vividpixel Effet d'éclairage ASCR 100 80 60 Contrôle de l'aspect MyFavorite Configuration Système MOVE/ENTER Filtre de lumière bleue BACK EXIT • Luminosité : La plage de réglage est de 0 à 100.
• Lorsque Filtre de lumière bleue est activé, les paramètres par défaut de Mode course sont automatiquement importés. • Entre les niveau 1 et niveau 3, la fonction de luminosité est configurable par l'utilisateur. • Le niveau 4 est un paramètre optimisé. Il est conforme à la certification TUV pour la lumière bleue faible. La fonction de luminosité n'est pas configurable par l'utilisateur.
3. Couleur Choisissez la couleur d'image désirée avec cette fonction. HDMI 1024x768@ 72Hz Mode Paysage Aura Off ROG Strix XG32VC HDR OFF Jeux Température Couleur Image Gamma Couleur Saturation 50 Sélection Entrée Effet d'éclairage MyFavorite Configuration Système MOVE/ENTER BACK EXIT • Température Couleur : Contient trois modes de couleurs prédéfinies (Froid, Normal, Chaud) et Mode Utilisateur. • Gamma : Contient trois modes de gamma dont 1.8, 2.2, 2.5.
4. Sélection Entrée Sélectionnez la source d'entrée : • HDMI, DisplayPort et Type-C HDMI 1024x768@ 72Hz Mode Paysage Aura Off ROG Strix XG32VC HDR OFF Jeux HDMI Image DisplayPort Couleur Type-C Sélection Entrée Effet d'éclairage MyFavorite Configuration Système BACK MOVE/ENTER 5.
6. MyFavorite Vous pouvez régler les raccourcis et les Régl. Personnalisé à partir de cette fonction principale. HDMI 1024x768@ 72Hz Mode Paysage Aura Off ROG Strix XG32VC HDR OFF Jeux Raccourci Image Régl.
7. Configuration Système Pour ajuster la configuration du système.
• DisplayPort Version (Version DisplayPort) : Sélectionnez DP 1.1 si votre carte graphique n’est pas compatible avec DP 1.1. • Informations: Affiche les informations du moniteur. • Tout réinit. : Sélectionner "Oui" pour restaurer tous les réglages sur le mode d'usine par défaut.
3.2 Spécifications Modèle Taille du panneau Résolution max. 2560 x 1440 Luminosité (Typ.) 440 nits (typiquement) Rapport de contraste intrinsèque (Typ.) Angle de vision (CR>10) 1000:1 178°(V) /178°(H) Couleurs de l’écran 1,07B Temps de réponse 4 ms (G à G), 1ms MPRT Son de HDMI Oui Entrée HDMI Oui Entrée DisplayPort Oui PBP Non Port USB3.
3.
3.
* Les modes qui ne sont pas listés dans ces tableaux peuvent ne pas être supportés. Pour une résolution optimale, nous vous conseillons de choisir un mode listé dans les tableaux ci-dessus.