Tabla de contenido Avisos iii Información de seguridad........................................................................... iv Limpieza y mantenimiento.......................................................................... vi 1.1 Bienvenido..................................................................................... 1-1 1.2 Contenido del paquete................................................................. 1-1 1.3 Ensamblar el monitor.................................................
Avisos Declaración de la Comisión Federal de Comunicaciones (FCC, Federal Communications Commission) Este dispositivo cumple la Parte 15 de las Reglas de la FCC. Su funcionamiento está sujeto a dos condiciones: • Este dispositivo no puede causar interferencias perjudiciales. • Este dispositivo debe aceptar cualquier interferencia recibida, incluida la interferencia que pueda causar un funcionamiento no deseado.
Este aparato digital de Clase B cumple la norma canadiense ICES-003. Este aparato digital de Clase B cumple los requisitos establecidos por las normas canadienses que regulan la fabricación de equipos generadores de interferencias. Cet appareil numérique de la classe B respecte toutes les exigences du Réglement sur le matériel brouiller du Canada. Información de seguridad iv • Antes de instalar el monitor, lea atentamente toda la documentación incluida en el paquete.
• Nunca inserte objetos ni derrame líquidos de ningún tipo en las ranuras de la carcasa del monitor. • Para garantizar el funcionamiento correcto, utilice el monitor solamente con los equipos que cumplan la norma UL, que tengan las tomas de corriente correctamente configuradas y con valores nominales comprendidos entre 100 y 240 V CA. • La toma de corriente se debe instalar junto al equipo y se debe tener acceso a ella sin ninguna dificultad.
Limpieza y mantenimiento • Antes de levantar o reparar el monitor, debe desconectar los cables y el cable de alimentación. Siga las técnicas correctas para levantar el monitor cuando lo coloque. Cuando levante o transporte el monitor, agárrelo por los bordes. No levante la pantalla por la base ni el cable de alimentación. • Limpieza. Apague el monitor y desenchufe el cable de alimentación. Limpie la superficie del monitor con un paño sin pelusas y no abrasivo.
Dónde encontrar más información Consulte las siguientes fuentes para obtener información adicional y las actualizaciones del software. 1. Sitios Web de ASUS Los sitios Web de ASUS en todo el mundo proporcionan información actualizada del hardware y los productos de software de ASUS. Consulte el sitio Web http://www.asus.com 2. Documentación opcional El paquete del producto puede incluir documentación opcional que puede haber agregado su distribuidor. Estos documentos no forman parte del paquete estándar.
1.1 Bienvenido ¡Gracias por adquirir el monitor LCD de ASUS®! Los monitores LCD panorámicos más modernos de ASUS proporcionan una visualización más nítida, clara y brillante, además de una gran cantidad de funciones que mejoran la experiencia de visualización. ¡Con estas funciones, disfrutará de la comodidad y la experiencia visual agradable que proporciona el monitor! 1.
1.3 Ensamblar el monitor Para ensamblar el monitor: • Mientras se monta el brazo y la base del monitor, es recomendable mantener el monitor dentro de su embalaje de poliestireno expandido (EPS, Expanded Polystyrene). 1. Alinee el orificio del tornillo del brazo con el tornillo integrado en la base. A continuación, inserte la base en el brazo. 2. Fije la base al brazo apretando el tornillo incluido. 3. Alinee las marcas de triángulo de la base del monitor y la tapa de proyección de LED.
1.4 Administración de los cables Puede organizar los cables con la ayuda de la tapa de puertos de entrada y salida. • Organizar los cables • Mediante la tapa de puertos de entrada y salida: las tapas se pueden montar o desmontar.
1.5 Conectar los cables 1.5.1 Parte posterior del monitor LCD XG32VQ 8 Mini HDMI 1 1-4 2 3 DCIN 4 5 1. Puerto HDMI 2.0 2. DisplayPort 3. Mini-DisplayPort 4. Conector para auriculares 5. Puerto de carga USB 6. Puerto de descarga USB 7. Puerto ENTRADA DE CC 8.
XG32VQR 8 HDMI-2 HDMI-1 1 2 DCIN 3 4 5 1. Puerto HDMI 2.0 2. Puerto HDMI 2.0 3. DisplayPort 4. Conector para auriculares 5. Puerto de carga USB 6. Puerto de descarga USB 7. Puerto ENTRADA DE CC 8.
XG35VQ 8 1-6 HDMI-2 HDMI-1 1 2 DCIN 3 4 5 1. Puerto HDMI 1.4 2. Puerto HDMI 2.0 3. DisplayPort 4. Conector para auriculares 5. Puerto de carga USB 6. Puerto de descarga USB 7. Puerto ENTRADA DE CC 8.
1.6 Presentación del monitor 1.6.1 Utilizar los botones de control Utilice los botones de control situados en la parte posterior del monitor para ajustar la configuración del monitor. 6 6 5 5 4 4 3 3 2 2 1 1. Indicador de encendido: • 2. En la tabla siguiente encontrará la definición del color del indicador de alimentación. Estado Descripción Blanco ENCENDER Ámbar Modo de espera APAGAR APAGAR Botón de alimentación: • 3. Presione este botón para encender y apagar el monitor.
• Presione el botón GamePlus para entrar en el menú principal GamePlus. • Active la función Punto de mira, Temporizador, Contador de FPS o Alineación de pantallas. • Mueva el botón ( ) hacia arriba o hacia abajo para seleccionar y presione ( ) para confirmar la función necesaria. Presione para salir. • Punto de mira, Temporizador y Contador de FPS se pueden mover presionando el botón de 5 direcciones .
2.1 Ajustar el monitor • Para conseguir la mejor visualización posible, es recomendable mirar a toda la superficie del monitor y, a continuación, ajustarlo con el ángulo que le resulte más cómodo. • Sujete la base para impedir que el monitor se caiga cuando cambie su ángulo. • Puede ajustar el ángulo del monitor entre +20˚ y -5˚, así como girarlo 50˚ hacia la izquierda o hacia la derecha. También puede ajustar la altura del monitor entre +/- 10cm.
2.2 Desmontar el brazo y la base (para el soporte para pared VESA) • Evite dañar la superficie del monitor. Mientras desmonta la base del monitor, mantenga siempre esté dentro de su embalaje de EPS. El brazo desmontable de este monitor LCD está especialmente diseñado para soportes para pared VESA. Para desmontar el brazo y la base 2-2 1. Desconecte los cables de alimentación y señal. Coloque el monitor boca abajo con cuidado sobre su embalaje de EPS. 2.
3.1 Menú en pantalla (OSD) 3.1.1 Cómo realizar la reconfiguración DisplayPort 2560x1440@ 60Hz Modo Carrera Aura OFF ROG Strix XG35VQ GameVisual Modo Escenario Filtro de luz azul Modo Carrera Color Modo Cine Imagen Modo RTS/RPG Configuración PIP/PBP Modo FPS Input Select Modo sRGB System Setup Modo MOBA MyFavorite Modo Usuario MOVE/ENTER BACK EXIT 1. Presione el botón central del botón de 5 direcciones para mostrar el menú OSD. 2.
3.1.2 1. Presentación de las funciones OSD GameVisual Esta función contiene ocho funciones secundarias que puede seleccionar según sus preferencias.
2. Filtro de luz azul Esta opción permite ajustar el nivel de energía de la luz azul emitida por la retroiluminación de LED. DisplayPort 2560x1440@ 60Hz Modo Carrera Aura OFF ROG Strix XG35VQ Nivel 0 GameVisual Nivel 1 Filtro de luz azul Nivel 2 Color Nivel 3 Imagen Nivel 4 Configuración PIP/PBP Input Select System Setup MyFavorite MOVE/ENTER BACK EXIT • Nivel 0: Sin cambios. • Nivel 1~4: Cuanto mayor sea el nivel, mayor será la reducción de luz azul.
3. Color Esta función permite seleccionar el color de la imagen que desea. DisplayPort 2560x1440@ 60Hz Modo Carrera Aura OFF ROG Strix XG35VQ GameVisual Filtro de luz azul Brillo 90 Contrast 80 Saturación Color Temp del color Imagen Gamma Configuración PIP/PBP Input Select System Setup MyFavorite MOVE/ENTER • • • • • EXIT Brillo: El intervalo de ajuste está comprendido entre 0 y 100. Contraste: El intervalo de ajuste está comprendido entre 0 y 100.
• • • • • ASCR: Seleccione ENCENDER o APAGAR para habilitar o deshabilitar la función de relación de contraste dinámico. ASCR se deshabilita cuando ELMB está activado. ELMB: Active esta opción para disminuir el desenfoque de movimiento y minimizar la parte de fantasma cuando los objetos en pantalla se mueven rápidamente. ELMB se deshabilitará si la fuente de entrada HDMI está seleccionada.
5. Configuración PIP/PBP (solo para XG35VQ) El parámetro Configuración PIP/PBP permite abrir otra ventana secundaria, en la que se muestra una señal procedente de otra fuente de vídeo, junto a la ventana principal, en la que se muestra la señal de vídeo original.
6. Input Select (Selección de entrada) Seleccione la fuente de entrada: • HDMI, DisplayPort y Mini DisplayPort. (para XG32VQ) • HDMI-1 (v2.0), HDMI-2 (v2.0) y DisplayPort. (para XG32VQR) • DisplayPort, HDMI-1 (v2.0) y HDMI-2.
7. System Setup (Config. Sistema) Permite ajustar la configuración del sistema. DisplayPort 2560x1440@ 60Hz Modo Carrerae Aura OFF ROG Strix XG35VQ GameVisual LIGHT IN MOTION Filtro de luz azul Aura Sync Color Aura RGB Imagen Sonido Configuración PIP/PBP USB Hub Input Select Config.
8. • USB Hub: Active y desactive la función de concentrador USB durante el modo de espera. • Config. OSD: Permite ajustar las opciones Temporizador OSD, DDC/CI y Transparencia para la pantalla OSD. • Idioma: Permite seleccionar el idioma OSD. Las opciones disponibles son: Inglés, Francés, Alemán, Español, Italiano, Holandés, Ruso, Polaco, Checo, Croata, Húngaro, Rumano, Portugués, Turco, Chino simplificado, Chino tradicional, Japonés, Coreano, Persa, Tailandés e Indonesio.
3.2 Aura AURA es un programa de software que controla los LED de color en dispositivos admitidos, como monitores, placas base, tarjetas gráficas, PC de sobremesa.Aura permite ajustar el color de los LED RGB en estos dispositivos y seleccionar diferentes efectos de luz. También puede corregir o ajustar el color de los LED calibrándolos. Para activar Aura: 1. ACTIVE la función Aura Sync (Sincronización de Aura) en el menú OSD. 2. Conecte el puerto de carga USB 3.0 del monitor al puerto USB del equipo.
4 Haga clic para deshacer los cambios. 5 Haga clic para aplicar los cambios. Si la conexión de carga USB entre el monitor y el equipo está desconectada, para reanudar la función Aura necesita volver a conectar el puerto de carga USB 3.0 del monitor al equipo y, a continuación, reiniciar este.
3.3 Especificaciones Modelo Tamaño del panel Resolución máxima 2560x1440 Brillo (típ.) 300cd/m2 Relación de contraste intrínseco (típ.) Ángulo de visualización (CR>10) Colores de visualización Tiempo de respuesta Sonido de HDMI Entrada HDMI 3000:1 178° (H), 178° (V) 16,7 M 4 ms (G a G) Sí HDMI2.0x1 Entrada DisplayPort Sí Mini DP1.2 Sí Puerto USB3.
Modelo Tamaño del panel XG32VQR 31,5” W (80,1 cm) Resolución máxima 2560x1440 Brillo (típ.) 450cd/m2 Relación de contraste intrínseco (típ.) 3000:1 Ángulo de visualización (CR>10) 178° (H), 178° (V) Colores de visualización ≥16,7 M Tiempo de respuesta Sonido de HDMI Entrada HDMI Entrada DisplayPort Puerto USB3.0 Auriculares Consumo en estado de ENCENDIDO 4 ms (G a G) Sí HDMI2.
Modelo Tamaño del panel 35” W (88,9 cm) Resolución máxima 3440x1440 Brillo (típ.) 300cd/m2 Relación de contraste intrínseco (típ.) 2500:1 Ángulo de visualización (CR>10) 178° (H), 178° (V) Colores de visualización 16,7 M Tiempo de respuesta Sonido de HDMI Entrada HDMI Entrada DisplayPort Puerto USB3.0 Auriculares Consumo en estado de ENCENDIDO 4 ms (G a G), 1 ms (MPRT) Sí HDMI1.4x1, HDMI2.
3.4 Solucionar problemas (preguntas más frecuentes) Problema Solución posible El indicador LED de alimentación • Presione el botón para comprobar si el monitor se no se ENCIENDE encuentra en el modo ENCENDIDO. • Compruebe si el cable de alimentación está correctamente conectado al monitor y a la toma de corriente. • Compruebe la función Indicador de encendido en el menú principal OSD. Seleccione “ENCENDER” para iluminar el LED de alimentación.
3.5 Lista de frecuencias admitidas Frecuencias primarias admitidas por los equipos XG32VQ 3-16 Lista de frecuencias HDMI2.0 DisplayPort 1.
XG32VQR Lista de frecuencias HDMI2.0 DisplayPort 1.
XG35VQ Lista de frecuencias HDMI1.4 HDMI2.0 DisplayPort 1.
Temporización de vídeo XG32VQ Lista de frecuencias HDMI2.0 DisplayPort 1.
XG35VQ Lista de frecuencias HDMI1.4 HDMI2.0 DisplayPort 1.