První vydání Únor 2021 Copyright © 2021 ASUSTeK COMPUTER INC. Všechna práva vyhrazena. Bez písemného souhlasu firmy ASUSTeK COMPUTER INC. („ASUS“) nesmí být žádná část této příručky, včetně výrobků a softwaru v příručce popsaných reprodukována, přenesena, přepsána, uložena v systému pro ukládání dat, ani přeložena do žádného jazyka v žádné podobě a žádným způsobem, kromě dokumentace uložené kupujícím pro účel zálohování. zálohování.
Obsah Upozornění.........................................................iv Bezpečnostní informace..................................v Péče a údržba................................................. viii 1.1 Vítejte!.................................................... 1-1 1.2 Obsah balení......................................... 1-1 1.3 Sestavení monitoru............................. 1-2 1.4 Připojení kabelů................................... 1-4 1.4.1 Zadní část LCD monitoru..................1-4 1.
Upozornění Prohlášení pro Federální komunikační komisi Toto zařízení vyhovuje části 15 předpisů FCC. Provoz vyžaduje splnění následujících dvou podmínek: • Toto zařízení nesmí způsobovat škodlivé rušení. • Toto zařízení musí přijmout veškeré přijaté rušení, včetně rušení, které by mohlo způsobit nežádoucí činnost. Toto zařízení bylo testováno a bylo shledáno, že vyhovuje omezením pro digitální zařízení třídy B, dle části 15 pravidel Federální komunikační komise (FCC).
Prohlášení pro kanadské Ministerstvo komunikací Toto digitální zařízení nepřekračuje limity třídy B pro vyzařování v rádiovém pásmu z digitálních zařízení, jak je stanoví předpisy o rádiovém rušení kanadského Ministerstva komunikací. Toto digitální zařízení třídy B vyhovuje kanadské normě ICES-003. Toto digitální zařízení třídy B splňuje všechny požadavky kanadských předpisů pro zařízení způsobující rušení.
• Nepřetěžujte napájecí panely a prodlužovací kabely. Přetížení může vést k požáru nebo k zásahu elektrickým proudem. • Vyhýbejte se extrémně prašnému prostředí, změnám teploty a vlhkosti. Monitor neumisťuje do prostor, kde hrozí navlhnutí/postříkání. Monitor umístěte na stabilní povrch. • Za bouřky nebo pokud nebude dlouho používán, odpojte produkt od elektrorozvodné sítě. Tím se zabrání poškození monitoru při přepětích v síti.
• VŽDY používejte nábytek, který dokáže produkt bezpečně unést. • VŽDY zajistěte, aby výrobek nepřesahoval hranu nosného nábytku. • VŽDY poučte děti o tom, jak je nebezpečné lézt na nábytek, aby se dostaly k produktu nebo jeho ovládacím prvkům. • VŽDY veďte kabely a kabely připojené k vašemu produktu tak, aby o ně nebylo možné zakopnout, zatáhnout nebo je uchopit. • V ŽÁDNÉM PŘÍPADĚ neumisťujte produkt na nestabilní místo.
Prevence převrácení Při používání displeje připevněte LCD ke zdi pomocí lanka nebo řetězu, který unese váhu monitoru, aby nedošlo k jeho pádu. Lanko nebo řetěz • Design displeje se může lišit od obrázků. • Instalaci musí provést kvalifikovaný technik a další informace vám poskytne váš dodavatel. • Pro modely s čistou hmotností >= 7 kg. Vyberte vhodný způsob, jak zabránit převrácení. • Použijte metodu popsanou na obrázku výše - připevnění lanka nebo řetězu ke stojanu a následné připevnění ke zdi.
Tento symbol přeškrtnuté popelnice na kolečkách znamená, že výrobek (elektrická, elektronická zařízení a knoflíkové baterie s obsahem rtuti) by se neměl vyhazovat do komunálního odpadu. Seznamte se s místními předpisy pro likvidaci elektronických výrobků. AEEE yönetmeliğine uygundur Následující symptomy jsou normální, nejde o závadu: • Displej může na začátku používání blikat, jde o vlastnost zářivkového podsvícení. Vypnutím a zapnutím vypínače blikání odstraníte.
Kde najdete další informace Další informace a aktualizace produktu a softwaru jsou dostupné z níže uvedených zdrojů. x 1. Web ASUS Celosvětový web ASUS nabízí aktualizované informace o hardwaru a softwaru ASUS. Viz http://www.asus.com 2. Volitelná dokumentace S produktem může být dodávána volitelná dokumentace, poskytovaná prodejcem. Tyto dokumenty nejsou standardní součástí balení.
1.1 Vítejte! Děkujeme, že jste zakoupili LCD monitor ASUS®! Nejnovější širokoúhlý LCD monitor firmy ASUS poskytuje čistší, širší a jasnější zobrazení a navíc řadu funkcí zlepšujících váš zážitek z obrazu. S těmito funkcemi si můžete užívat pohodlí a příjemný vizuální zážitek, který vám tento monitor přináší! 1.
1.3 Sestavení monitoru Pokyny pro sestavení monitoru: •• 1. Během sestavování ramene/základny monitoru doporučujeme udržovat monitor v jeho polystyrenovém obalu (EPS, Expanded Polystyrene). Vyjměte veškeré příslušenství z EPS na výšku. 1 2. 3. Vyjměte EPS z lepenkové krabice. Zatlačením otevřete otvor pro montáž stojanu. 3 4. 5. 1-2 2 Zorientujte otvory pro šrouby na monitoru s dodanými šrouby na rameni. Namontujte rameno k monitoru a připevněte jej pomocí čtyř (4) šroubů.
6. Nasaďte kryt VESA. or 6 5 4 7. 8. Zorientujte a připevněte podstavec k rameni. Připevněte základnu k ramenu utažením dvou (2) dodaných šroubů. 8 7 9. Vyjměte monitor z obalu EPS. •• •• Nepřidržujte panel – při zvedání monitoru doporučujeme uchopit stojánek. Základní velikost šroubu je M6 x 15 mm. Nastavte sklon monitoru, který vám nejvíce vyhovuje.
1.4 Připojení kabelů 1.4.1 Zadní část LCD monitoru 1 HDMI 2 1-4 3 USB-C/ 4 5 6 7 8 7 1. Zámek Kensington 5. 2. Port vstupu stejnosměrného napájení Port USB C/DP Port (PD 5 V/3 A nebo 9 V/2 A) 6. Port USB 3.0 pro odesílání dat 3. Port HDMI 7. 4. DisplayPort Porty USB3.0 pro přijímání dat (x2) 8.
1.5 Představení monitoru 1.5.1 Použití ovládacích tlačítek Nastavte monitor pomocí ovládacích tlačítek na spodní části monitoru. •• Stisknutím tlačítka Výběr vstupu nabídku OSD. nebo tlačítka zobrazíte rychlou Výběr vstupu Nabídka Zavřít GamePlus GameVisual Hlasitost Power Off 1. Indikátor napájení: • Význam barev kontrolky napájení je v následující tabulce. Stav 2. Popis Bílá ZAPNUTO Oranžová Režim připravenosti Vypnuto Vypnuto Tlačítko Napájení: • 3.
• Tlačítko GamePlus: Toto je rychlé tlačítko. Výchozí nastavení je GamePlus. - Slouží k aktivaci funkcí Vlasový kříž, Časovač, Počítadlo FPS nebo Zarovnání zobrazení. - Posouváním tlačítka nahoru/dolů vyberte a stisknutím tlačítka potvrďte požadovanou funkci. •• • Další informace o funkci GamePlus viz strana 1-7. Tlačítko GameVisual: Toto je rychlé tlačítko. Výchozí nastavení je GameVisual.
1.5.2 Funkce GamePlus Funkce GamePlus poskytuje sadu nástrojů a vylepšuje herní prostředí pro uživatele při hraní různých typů her. Překrytí vlasového kříže se čtyřmi různými možnostmi vlasového kříže vám umožní výběr možnosti, která nejlépe vyhovuje hře, kterou hrajete. Na levou stranu displeje lze rovněž umístit časovač na obrazovce pro sledování uplynulé doby hraní; díky počítadlu FPS (snímky za sekundu) máte přehled o tom, jak hladce hra probíhá.
GamePlus — Počítadlo FPS GamePlus FPS NEXT BACK/EXIT GamePlus 1.5.3 Funkce GameVisual Funkce GameVisual pomáhá pohodlně vybírat z různých režimů obrazu. Pokyny pro aktivaci funkce GameVisual: Opakovaným stisknutím rychlého tlačítka GameVisual vyberte. • Režim Krajina: Nejlepší volba pro prohlížení fotografií scén s technologií optimalizace videa GameVisualTM Video intelligence Technology.
• Režim MOBA: Toto je nejlepší volba pro hraní her MOBA (Multiplayer Online Battle Arena) s technologií GameVisualTM Video intelligence Technology. • Uživatelský režim: Menu Barva nabízí více položek. •• •• •• V režimu Závod nemůže uživatel konfigurovat funkce Sytost, Ostrost a ASCR. V režimu sRGB namůže uživatel konfigurovat funkce Sytost, Teplota barev, Ostrost, Jas, Kontrast a ASCR. V Režim MOBA nelze konfigurovat funkce Sytost a ASCR.
2.1 Odpojení stojanu (nástěnný držák VESA) •• Zabraňte poškození povrchu monitoru. Při odpojování stojanu monitoru vždy udržujte monitoru v jeho polystyrenovém (EPS) obalu. Odnímatelný stojan monitoru je speciálně navržen pro upevnění na stěnu VESA. 1. Odpojte napájecí a signálové kabely. Opatrně položte monitor obrazovkou dolů na polystyrenový obal monitoru. 2. Sejměte kryty ze spoje monitoru a ramene. 3. Uvolněte čtyři (4) dodané šroubky, které zajišťují rameno k zadní straně monitoru. 4.
or •• •• 2-2 Sada pro montáž na stěnu VESA (100 x 100 mm) se prodává zvlášť. Používejte jen držáky na stěnu se schválením UL a minimální zatížitelností 22,7 kg (velikost šroubu M4 x 10 mm).
2.2 Nastavení monitoru • V zájmu optimálního pozorování doporučujeme podívat se tak, abyste viděli celou plochu monitoru, a pak nastavit sklon, který vám nejvíc vyhovuje. • Při nastavování sklonu držte stojan, aby monitor nespadl. • Sklon monitoru můžete nastavit v rozmezí -5° až 20° a také je možné natočení 25° ve směru vlevo/vpravo. Můžete také nastavit výšku monitoru v rozmezí ± 10 cm. -5 ~ 20° 10cm 25° 25° •• Je normální, že se monitor při nastavování úhlu mírně třese.
3.1 Nabídka OSD (OnScreen Display) 3.1.1 Změna konfigurace HDMI 3440x1440@ 100Hz Režim Závod Aura VYPNUTO ROG Strix XG349C HDR VYPNUTO Gaming Overclocking Obraz Variable OD Barva Variable Refresh Rate Výběr vstupu ELMB/ELMB SYNC PIP/PBP Setup GamePlus Lighting Effect GameVisual MyFavorite Shadow Boost Nastavení systému MOVE/ENTER BACK EXIT 1. Stisknutím tlačítka nebo tlačítka Výběr vstupu rychlou nabídku OSD. 2. Stisknutím tlačítka 3.
3.1.2 Představení funkcí OSD 1. Gaming Nakonfigurujte své herní předvolby. HDMI 3440x1440@ 100Hz Režim Závod Aura VYPNUTO ROG Strix XG349C HDR VYPNUTO Gaming Overclocking Obraz Variable OD Barva Variable Refresh Rate Výběr vstupu ELMB/ELMB SYNC PIP/PBP Setup GamePlus Lighting Effect GameVisual MyFavorite Shadow Boost Nastavení systému MOVE/ENTER • EXIT Overclocking: Umožňuje upravit obnovovací frekvenci. •• Přetaktování je k dispozici, pouze pokud je vstupním zdrojem DisplayPort.
•• •• •• • • • Chcete-li aktivovat ELMB, vypněte nejprve funkci Variabilní obnovovací frekvence. Pokud je zapnutá funkce ELMB, funkce Adaptive-Sync, Režim PIP / PBP, Dynamické ztmavení a ASCR budou deaktivovány. Funkce ELMB je vypnuta, když je vertikální frekvence menší než 75Hz. GamePlus: Konfiguruje herní prostředí. Pro podrobnosti si přečtěte stránky 1-7 a 1-8. GameVisual: Zvolí režim obrazu. Pro podrobnosti si přečtěte stránky 1-8 a 1-9.
• Dynamic Dimming: Synchronizuje se s obsahem při změně kontrastu pro provedení dynamického stmívání podsvícení. • ASCR: Volbou ZAPNUTO nebo VYPNUTO zapnete nebo vypnete funkci dynamického kontrastního poměru. •• • Nastavení poměru stran: Upravuje poměr stran na Celá, 4:3, 16:9 (24"W) a 16:9 (27"W). •• • ASCR není k dispozici, pokud je povolena funkce Dynamické ztmavení. Výběrem možnosti 4:3 se obraz zobrazí v původním poměru stran vstupního zdroje.
3. Barva Tato nabídka umožňuje nastavit barvu obrazu. HDMI 3440x1440@ 100Hz Režim Závod Aura VYPNUTO ROG Strix XG349C HDR VYPNUTO Gaming Teplota barev Obraz Gamma Barva Sytost Výběr vstupu PIP/PBP Setup Lighting Effect MyFavorite Nastavení systému BACK MOVE/ENTER • EXIT Teplota barev: Uvolí požadovanou teplotu barev. Možnosti k dispozici: Studené, Normální, Teplé a Uživatelský režim. •• V uživatelském režimu lze nastavovat volby Č (červená), Z (zelená) a M (modrá), rozsah nastavení je 0 až 100.
5. PIP/PBP Setup Slouží ke konfigurování nastavení více obrazů. HDMI 3440x1440@ 100Hz Režim Závod Aura VYPNUTO ROG Strix XG349C HDR VYPNUTO Gaming Režim PIP/PBP Obraz Zdroj PIP/PBP Barva Nastavení barev Výběr vstupu Velikost PIP PIP/PBP Setup Lighting Effect MyFavorite Nastavení systému BACK MOVE/ENTER EXIT • Režim PIP/PBP: Vyberte preferovaný režim PIP/PBP nebo deaktivujte funkci. • Zdroj PIP/PBP: Slouží k výběru zdroje vstupního videa z HDMI, DisplayPort a Type-C.
• Aura Sync: Umožňuje zapnout nebo vypnout funkci Aura Sync, která synchronizuje světelný efekt Aura RGB mezi všemi podporovanými zařízeními. • Aura RGB: Nastaví světelný vzorec Aura RGB na zadní části monitoru. Možnosti k dispozici: Barevný cyklus, Statický, Pulzování, Stroboskop a VYP. •• •• •• Pro vzorky Aura RGB, například Statický, Pulzování a Stroboskop, lze nastavit upřednostňovanou barvu. K dispozici jsou barvy červená (R), zelená (G), modrá (B), azurová (C), purpurová (M) a žlutá (Y).
8. Nastavení systému Nastavení konfigurace systému.
• USB Setup: • KVM: Slouží k přepínání výstupního portu USB na výstupní port USB-C nebo USB-B. • Šířka pásma Type-C: Vyberte USB typ C s USB 2.0 nebo USB 3.1. USB 3.1 je až do rozlišení 3440x1440-60Hz. • USB Hub: Nastaví provoz USB rozbočovače na Zapnuto během pohotovostního režimu (porty USB typu A na LCD monitoru lze použít k nabíjení zařízení USB během pohotovostního režimu) nebo Vypnuto během pohotovostního režimu (Porty USB typu A nelze použít k nabíjení zařízení USB v pohotovostním režimu).
3.2 Aura Armoury Crate je softwarový program, který ovládá barevné LED na podporovaných zařízeních, jako jsou monitory, základní desky, grafické karty, stolní počítače atd. Aura vám umožňuje upravit barvu LED RGB u těchto zařízení a vybrat různé světelné efekty. Barvu LED lze také opravit nebo upravit kalibrací. Aktivace programu Aura: 1. Nastavte funkci Aura Sync na ZAPNUTO v nabídce OSD. 2. Propojte výstupní port USB 3.0 monitoru s portem USB počítače. 3.
3.3 Specifikace Model XG349C Velikost zobrazovače Širokoúhlý 34,14'' (86,72 cm) Max. rozlišení 3440x1440 Jas (typ.) 400 nitů (typicky) Kontrastní poměr (typ.) 1000:1 Pozorovací úhel (CR≤10) 178°(H) /178°(V) Zobrazované barvy 1,07B Doba odezvy 1 ms (G na G) Zvuk z HDMI Ano Vstup HDMI Ano Vstup DisplayPort Ano PIP/PBP Ano Port USB3.
3.4 Řešení potíží (FAQ) Problém LED kontrolka napájení nesvítí Možné řešení • Stiskem tlačítka ověřte, zda je monitor zapnutý. • Zkontrolujte, zda je adaptér a napájecí kabel řádně připojen k monitoru a do elektrické zásuvky. • Zkontrolujte funkci Indikátor napájení v nabídce OSD. Stisknutím volby „ZAPNUTO“ zapnete LED napájení. Indikátor LED napájení svítí bíle a nezobrazuje se obraz • Zkontrolujte, zda je monitor a počítač zapnutý.
3.
Frekvence CEA Rozlišení H-frekvence V-frekvence DCLK (KHz) (Hz) (MHz) HDMI DP/ Type-C 640x480p-60Hz 31,46 59,94 25,17 V V 720x480p-60Hz 31,46 59,94 27 V V V 720x480p-60Hz 31,46 59,94 27 V 1280x720p-60Hz 45 60 74,25 V V 1920x1080i-60Hz 33,75 60 74,25 V V 1440x480p-60Hz 31,46 59,94 54 Neuvedeno V V 1440x480p-60Hz 31,46 59,94 54 Neuvedeno 1920x1080p-60Hz 67,5 60 148,5 V V 720x576p-50Hz 31,25 50 27 V Neuvedeno 1280x720p-50Hz 37,5 50 74,25 V V 1920x10