Índice Avisos iii Informação de Segurança........................................................................... iv Cuidados e limpeza..................................................................................... vi 1.1 Bem-vindo...................................................................................... 1-1 1.2 Conteúdo da embalagem............................................................. 1-1 1.3 Montar o monitor.................................................................
Avisos Declaração da Comissão Federal de Comunicações (FCC) Este dispositivo está em conformidade com o Artigo 15º das Normas da FCC. O seu funcionamento está sujeito às duas condições seguintes: • Este dispositivo não pode causar interferências prejudiciais. • Este dispositivo deve aceitar qualquer interferência recebida incluindo interferências que possam causar operações não desejadas.
Este aparelho digital de classe B cumpre todos os requisitos da regulamentação canadiana relativa a equipamentos que causam interferências. Cet appareil numérique de la classe B respecte toutes les exigences du Réglement sur le matériel brouiller du Canada. Informação de Segurança iv • Antes de instalar o monitor, leia atentamente toda a documentação que vem na embalagem. • Para evitar o perigo de incêndio ou de choque eléctrico, nunca exponha o monitor à chuva ou a humidade.
• A tomada eléctrica deverá estar instalada próximo do equipamento e ser facilmente acessível • Se o monitor apresentar quaisquer problemas técnicos, contacte um técnico qualificado. • Providencie uma ligação à terra antes de ligar a ficha à corrente elétrica. Ao desligar a ligação à terra, certifique-se de que o faz depois de retirar a ficha da tomada de corrente eléctrica. • Utilize o transformador ADP-90YD B da DELTA.
Cuidados e limpeza • • • Antes de levantar ou reposicionar o monitor, deve desligar os cabos de sinal e o cabo de alimentação. Siga as técnicas de levantamento correctas ao posicionar o monitor. Para levantar ou transportar o monitor, segure-o pelas extremidades. Não levante o monitor segurando-o pelo suporte ou pelo cabo de alimentação. Limpeza. Desligue o monitor e o cabo de alimentação. Limpe a superfície do monitor com um pano sem pêlos e não abrasivo.
Onde encontrar mais informação Consulte as seguintes fontes para obter mais informação e actualizações tanto do produto como do software. 1. Websites da ASUS Os websites da ASUS fornecem-lhe informação actualizada sobre o hardware e software ASUS. Visite o site http://www.asus.com 2. Documentação opcional A embalagem do seu produto pode incluir documentação opcional que pode ter sido incluída pelo vendedor. Estes documentos não fazem parte da embalagem padrão.
1.1 Bem-vindo Obrigado por ter adquirido o monitor LCD da ASUS®! O mais recente monitor com ecrã LCD largo da ASUS proporciona uma visualização mais nítida, mais alargada e com cores mais vivas para além de oferecer uma série de outras funções que ajudam a melhorar a sua experiência. Com estas capacidades, pode desfrutar ao máximo do que os monitores desta série têm para lhe oferecer! 1.
1.3 Montar o monitor 1.3.1 Para montar o monitor: • Quando montar o braço/base do monitor, recomendamos que mantenha o monitor no interior da sua embalagem EPS (Poliestireno Expandido). 1. Alinhe o orifício do parafuso no braço com o parafuso incorporado na base. Depois, insira a base no braço. 2. Fixe a base ao braço apertando o parafuso incorporado. 3. Alinhe as marcas triangulares na base do monitor e a tampa de projecção LED. Depois, fixe a tampa de projecção LED à base do monitor. 4.
1.4 Gestão dos cabos Pode organizar os cabos com a ajuda da tampa de entrada/saída. • Organizar os cabos • Utilizando a tampa da porta de entrada/saída: as tampas podem ser encaixadas ou desencaixadas.
1.5 Ligação dos cabos 1.5.1 Traseira do monitor LCD XG32VQ 8 Mini HDMI 1 1-4 2 3 DCIN 4 5 6 1. Porta HDMI 2.0 2. DisplayPort 3. Mini DisplayPort 4. Tomada dos auscultadores 5. Porta de saída USB 6. Porta de entrada USB 7. Porta de entrada DC 8.
XG32VQR 8 HDMI-2 HDMI-1 1 2 DCIN 3 4 5 6 1. Porta HDMI 2.0 2. Porta HDMI 2.0. 3. DisplayPort 4. Tomada dos auscultadores 5. Porta de saída USB 6. Porta de entrada USB 7. Porta de entrada DC 8.
XG35VQ 8 1-6 HDMI-2 HDMI-1 1 2 DCIN 3 4 5 6 1. Porta HDMI 1.4 2. Porta HDMI 2.0. 3. DisplayPort 4. Tomada dos auscultadores 5. Porta de saída USB 6. Porta de entrada USB 7. Porta de entrada DC 8.
1.6 Apresentação do monitor 1.6.1 Utilização dos botões de controlo Utilize os botões de controlo na traseira do monitor para ajustar as definições do monitor. 6 6 5 5 4 4 3 3 2 2 1 1. Indicador de energia: • 2. As cores do LED indicador de alimentação estão referenciadas na tabela seguinte. Estado Descrição Branco LIG. Âmbar Modo de suspensão DESLIG. DESLIG. Botão de Energia: • Prima este botão para ligar/desligar o monitor.
• Prima o botão GamePlus para aceder ao menu principal da função GamePlus. • Activar as funções de Mira, Temporizador, Contador de FPS ou Alinhamento do ecrã • Movimente o botão e pressione para sair. • ( ( ) para cima/baixo para seleccionar ) para confirmar a função desejada. Prima As funções Mira/Temporizador/Contador de FPS podem ser ajustados com o botão multidireccional.
2.1 Ajuste do monitor • Para uma óptima visualização, recomendamos-lhe que olhe para o monitor de frente e que ajuste o monitor adoptando um ângulo que lhe seja mais confortável. • Segure no suporte para evitar a queda do monitor ao alterar o seu ângulo. • Pode ajustar o ângulo do monitor de +20˚ a -5˚ e permite ajuste da rotação em 50˚ tanto para a esquerda como para a direita. Pode também ajustar a altura do monitor em +/- 10 cm.
2.2 Remoção do braço/suporte (para montagem VESA) • Evite danificar a superfície do monitor. Quando remover o suporte do monitor, mantenha-o sempre no interior da sua embalagem EPS. O suporte amovível deste monitor foi especialmente concebido para permitir a montagem na parede segundo a especificação VESA. Para remover o braço/o suporte 2-2 1. Desligue o cabo de alimetação e os cabos de sinal. Coloque cuidadosamente o monitor com o ecrã voltado para baixo na embalagem EPS. 2.
3.1 Menu OSD 3.1.1 Como reconfigurar DisplayPort 2560x1440@ 60Hz Modo de Corrida Aura OFF ROG Strix XG35VQ GameVisual Modo de Cenário Filtro de Luz Azul Modo de Corrida Cor Modo de Cinema Imagem Modo RTS/RPG Configuração de PIP/PBP Modo FPS Input Select Modo sRGB System Setup Modo MOBA MyFavorite Modo de Utilizador MOVE/ENTER BACK EXIT 1. Pressione o centro do botão multidireccional para abrir o menu OSD. 2.
3.1.2 1. Apresentação das funções do menu OSD GameVisual Esta função inclui oito sub-funções que pode selecionar de acordo com as suas preferências.
2. Filtro de luz azul Ajustar o nível de intensidade da luz azul emitida pela retroiluminação LED. DisplayPort 2560x1440@ 60Hz Modo de Corrida Aura OFF ROG Strix XG35VQ Nível 0 GameVisual Nível 1 Filtro de Luz Azul Nível 2 Cor Nível 3 Imagem Nível 4 Configuração de PIP/PBP Input Select System Setup MyFavorite MOVE/ENTER BACK EXIT • Nível 0: Sem alteração. • Nível 1~4: Quanto mais elevado for o nível, mais reduzida será a luz azul.
3. Cor Seleccione a cor pretendida ao nível da imagem com esta função. DisplayPort 2560x1440@ 60Hz Modo de Corrida Aura OFF ROG Strix XG35VQ GameVisual Filtro de Luz Azul Brilho 90 Contraste 80 Saturação Cor Temp. da cor Imagem Gama Configuração de PIP/PBP Input Select System Setup MyFavorite MOVE/ENTER EXIT • Brilho: O intervalo para ajuste situa-se entre 0 e 100. • Contraste: O intervalo para ajuste situa-se entre 0 e 100. • Saturação: O intervalo para ajuste situa-se entre 0 e 100.
• Controlo de aspecto: Ajusta a proporção para “Total”, “4:3” e “16:9” (Apenas para XG35VQ). • ASCR: Seleccione LIG. ou DESLIG. para activar ou desactivar a função de contraste dinâmico, a função ASCR está Desactivada quando a função ELMB está activada. • ELMB: Marque para reduzir a desfocagem e minimizar imagens residuais quando os objectos no ecrã se movem rapidamente. A função ELMB será desactivada se for seleccionada a fonte HDMI.
5. Configuração de PIP/PBP (apenas para XG35VQ) A opção Configuração PIP/PBP permite-lhe abrir uma janela secundária a partir de outra origem de sinal de vídeo para além da janela principal que corresponde à origem de sinal de vídeo original.
6. Input Select (Seleccionar entrada) Seleccionar a fonte de entrada: • HDMI, DisplayPort e Mini DisplayPort. (para XG32VQ) • HDMI-1 (v2.0), HDMI-2 (v2.0) e DisplayPort. (para XG32VQR) • DisplayPort, HDMI-1 (v2.0) e HDMI-2.
7. System Setup (Config. sistema) Permite-lhe aceder às opções de configuração do sistema. DisplayPort 2560x1440@ 60Hz Modo de Corrida Aura OFF ROG Strix XG35VQ GameVisual LIGHT IN MOTION Filtro de Luz Azul Aura Sync Cor Aura RGB Imagem Som Configuração de PIP/PBP USB Hub Input Select Config. OSD System Setup Idioma Informação MyFavorite MOVE/ENTER EXIT BACK DisplayPort 2560x1440@ 60Hz Modo de Corrida Aura OFF ROG Strix XG35VQ GameVisual Bloqueio de teclas LIG.
8. • USB Hub: Ativar/desativar a função de concentrador USB durante o modo de suspensão. • Config. OSD: Ajusta as opções Tempo limite do OSD, DDC/CI e Transparência do menu OSD. • Idioma: Esta opção permite seleccionar o idioma. Estão disponíveis as seguintes opções: Inglês, Francês, Alemão, Espanhol, Italiano, Neerlandês, Russo, Polaco, Checo, Croata, Húngaro, Romeno, Português, Turco, Chinês simplificado, Chinês tradicional, Japonês, Coreano, Persa, Tailandês e Indonésio.
3.2 Aura AURA é um software que controla os LED coloridos em dispositivos suportados, tais como, placas principais, placas gráficas, PC, etc. O software Aura permite ajustar a cor dos LED RGB nesses dispositivos e seleccionar diferentes efeitos de iluminação. Pode também corrigir ou ajustar a cor dos LED efectuando a sua calibragem. Para activar o software Aura: 1. Active a função Aura Sync no menu OSD. 2. Ligue a porta de saída USB 3.0 do monitor à porta USB do seu computador. 3.
4 Clique para anular as alterações. 5 Clique para aplicar as alterações. Se a ligação USB entre o monitor e o computador for desligada, para retomar a função Aura, deverá voltar a ligar a porta de saída USB 3.0 do monitor ao computador e, em seguida, reiniciar o computador.
3.3 Especificações Modelo 31,5" (80,1 cm) Resolução máxima 2560x1440 Brilho (Típ.) 300cd/m2 Relação de contraste intrínseca (Típ.) Ângulo de visualização (CR > 10) Cores do monitor Tempo de resposta Som proveniente de origem de sinal HDMI Entrada HDMI 3000:1 178°(H)/178°(V) 16,7 M 4 ms (cinzento a cinzento) Sim HDMI2.0x1 Entrada DisplayPort Sim Mini DP1.2 Sim Porta USB3.
Modelo XG32VQR Tamanho do ecrã 31,5" (80,1 cm) Resolução máxima 2560x1440 Brilho (Típ.) 450cd/m2 Relação de contraste intrínseca (Típ.) Ângulo de visualização (CR > 10) Cores do monitor Tempo de resposta Som proveniente de origem de sinal HDMI Entrada HDMI Entrada DisplayPort 3000:1 178°(H)/178°(V) ≥16,7 M 4 ms (cinzento a cinzento) Sim HDMI2.0x2 Sim Porta USB3.
Modelo Tamanho do ecrã 35" (88,9 cm) Resolução máxima 3440x1440 Brilho (Típ.) 300cd/m2 Relação de contraste intrínseca (Típ.) Ângulo de visualização (CR > 10) Cores do monitor Tempo de resposta Som proveniente de origem de sinal HDMI Entrada HDMI Entrada DisplayPort Porta USB3.0 Auscultadores Consumo de energia 2500:1 178°(H)/178°(V) 16,7 M 4 ms (cinzento a cinzento), 1 ms (MPRT) Sim HDMI1.4x1, HDMI2.
3.4 Resolução de problemas (perguntas frequentes) Problema Solução possível O LED de alimentação não está ligado. • Prima o botão para ver se o monitor está ligado. • Verifique se o cabo de alimentação está devidamente ligado ao monitor e à tomada eléctrica. • Verifique a função Indicador de energia no menu OSD. Selecione "LIG." para ligar o LED de energia. O LED de alimentação fica âmbar e não é apresentada qualquer imagem no ecrã • Verifique se o ecrã e o computador estão ligados.
3.5 Lista de resoluções suportadas Valores suportados no modo PC XG32VQ 3-16 Lista de resoluções HDMI2.0 DisplayPort 1.
XG32VQR Lista de resoluções HDMI2.0 DisplayPort 1.
XG35VQ 3-18 Lista de resoluções HDMI1.4 HDMI2.0 DisplayPort 1.
Temporização do vídeo XG32VQ Lista de resoluções HDMI2.0 DisplayPort 1.
XG35VQ Lista de resoluções HDMI1.4 HDMI2.0 DisplayPort 1.