AFIŞAJ MARE PENTRU JOCURI
Cuprins Note .......................................................................................................... iii Informaţii referitoare la siguranţă.............................................................. iv Îngrijire şi curăţare...................................................................................... vi 1.1 Bine aţi venit.................................................................................. 1-1 1.2 Conţinut pachet...............................................
Note Declaraţie a Comisiei federale pentru comunicaţii Acest dispozitiv respectă Secţiunea 15 a Regulilor FCC. Funcţionarea trebuie să îndeplinească următoarele două condiţii: • • Acest dispozitiv nu poate cauza interferenţe nocive. Acest dispozitiv trebuie să accepte orice interferenţe primite, inclusiv interferenţele care pot provoca o funcţionare nedorită.
Informaţii referitoare la siguranţă iv • Înainte de configurarea monitorului, citiţi cu atenţie toată documentaţia care însoţeşte produsul. • Pentru a preveni pericolul de incendiu sau de electrocutare, nu expuneţi monitorul la ploaie sau umiditate. • Nu încercaţi să deschideţi carcasa monitorului. Tensiunile înalte periculoase din monitor pot provoca vătămarea corporală gravă. • Dacă sursa de alimentare s-a stricat, nu încercaţi să o reparaţi singuri.
• Realizaţi o conexiune de împământare înainte de a conecta fişa de reţea la reţea. Iar când deconectaţi conexiunea de împământare, asiguraţi-vă că deconectaţi după scoaterea fişei de reţea de la reţea. • Folosiţi un dispozitiv ADP-230GB T cu adaptor DELTA. AVERTIZARE Utilizarea altor căşti decât cele specificate poate conduce la pierderea auzului ca urmare a presiunilor de sunet excesive.
Îngrijire şi curăţare • • • Înainte să ridicaţi sau să mutaţi monitorul, este bine să deconectaţi cablurile şi cablul de alimentare. Respectaţi tehnicile de ridicare corecte când poziţionaţi monitorul. Când ridicaţi sau transportaţi monitorul, ţineţi de marginile monitorului. Nu ridicaţi monitorul apucându-l de suport sau de cablu. Curăţirea. Opriţi monitorul şi deconectaţi cablul de alimentare. Curăţaţi suprafaţa monitorului cu o cârpă fără scame, neabrazivă.
Unde găsiţi informaţii suplimentare Consultaţi următoarele surse pentru informaţii suplimentare şi pentru actualizări ale produsului şi software-ului. 1. Site-uri ASUS Site-urile ASUS internaţionale oferă informaţii actualizate despre produsele hardware şi software ASUS. Consultaţi http://www.asus.com 2. Documentaţie opţională Pachetul produsului dvs. poate include documentaţie opţională care poate fi adăugată de dealer. Aceste documente nu fac parte din pachetul standard.
1.1 Bine aţi venit Vă mulţumim pentru achiziţionarea monitorului LCD ASUS®! Cel mai nou monitor LCD cu ecran panoramic de la ASUS oferă un afişaj cu contrast mai mare, mai lat şi mai luminos, plus o mulţime de caracteristici care îmbunătăţesc experienţa de vizualizare. Cu aceste caracteristici, vă puteţi bucura de confortul şi de experienţa vizuală încântătoare pe care o oferă monitorul! 1.
1.3 Asamblarea monitorului Pentru a asambla monitorul: 1-2 1. Scoateţi patru mânere de pe fundul cutiei de carton. 2. Scoateţi cutia de carton de sus. 3. Scoateţi cutia de carton cu accesoriile din EPS de sus.
4. Scoateţi EPS de sus. 5. Scoateţi monitorul.
6. Folosiţi o şurubelniţă pentru a instala proiectorul AuraSync.
1.4 Conectaţi cablurile 1.4.1 Partea posterioară a monitorului LCD 1 2 3 4 12 5 HDMI-3 6 1. Intrare audio 2. Mufă căşti 3. Port descendent USB 4. Port descendent USB 5. Port ascendent USB 6. Port HDMI-3 7. Port HDMI-2 8. Port HDMI-1 9. DisplayPort HDMI-2 HDMI-1 7 8 DCIN 9 10 11 10. Portul AURA SYNC 11. Port de intrare c.c. 12.
1.5 Introducere monitor 1.5.1 Folosirea butoanelor de comandă Puteţi folosi butonul de comandă din partea din spate a monitorului pentru a regla setările monitorului. 6 5 4 3 2 1 1. Indicator alimentare: • Definiţia de culoare a indicatorului de alimentare se află în tabelul de mai jos. 2. • 3. Descriere Alb PORNIT Auriu Mod aşteptare OPRIT OPRIT Butonul Alimentare: Utilizaţi acest buton pentru a porni şi opri monitorul. • GameVisual: Aceasta este o tastă de Scurtătură.
2.1 Reglarea monitorului • Pentru vizualizare optimă, vă recomandăm să priviţi faţa completă a monitorului, apoi reglaţi monitorul la unghiul care este cel mai confortabil pentru dvs. • Ţineţi suportul pentru a preveni căderea monitorului în timpul modificării unghiului acestuia. • Puteţi regla înclinarea monitorului de la -5˚ la 10˚. -5 ~ 10 Este normal ca monitorul să tremure uşor în timp ce reglaţi unghiul de vizualizare.
2.2 Dimensiuni externe Unitate: mm [inci] 10 06 01 名稱:ROG LOGO 顏色:深鈦色 材質:塑膠 表面處理:整周C角拋光8000番/ 內部紋理斜紋咬花MT11015 名稱:後殼 & IO cover 顏色:深鈦色 材質:塑膠 表面處理:MT11015 07 02 名稱:Republic of gamers 顏色:深鈦色 材質:塑膠 表面處理: 凹刻 / 底部拋亮8000番 名稱:Rear IO 顏色:深鈦色 材質:塑膠 表面處理:凹刻 / 底部拋亮8000番 (形狀與符號) 名稱:中框 顏色:深鈦色 材質:塑膠 表面處理:MT11015 08 名稱:Rear IO 顏色:深鈦色 材質:塑膠 表面處理:凹刻 / 底部拋亮8000番 (形狀與符號) 名稱:AURA SYNC ICON 09 綠色區塊凹刻0.
2.3 Detaşarea piciorului/suportului (pentru montarea pe perete VESA) Suportul detaşabil al acestui monitor este proiectat special pentru montarea pe perete VESA. Pentru a detaşa braţul/suportul 1. Deconectaţi cablurile de alimentare şi de semnal. 2. Îndepărtaţi capacul I/O de pe capacul de spate (1) după care scoateţi şurubelniţa din capacul I/O (2). 3. Scoateţi cele patru (4) şuruburi care fixează piciorul de partea din spate a monitorului. 4. Detaşaţi suportul (piciorul şi baza) de pe monitor.
3.1 Meniu OSD (On Screen Display - Afişare pe ecran) 3.1.1 Cum se reconfigurează HDMI-1 3840x2160@ 60Hz Mod curse Aura Color Cycle ROG Strix XG438 HDR OFF + GameVisual Mod peisaj GamePlus Mod curse Culoare Mod cinema Imagine Mod RTS/RPG Setare PIB/PBP Mod FPS Selectare introducere Mod sRGB Configurare sistem Mod MOBA MyFavorite Mod utilizator MOVE/ENTER BACK EXIT 1. Apăsaţi punctul Central de pe butonul de navigare în 5 direcţii pentru a afişa meniul OSD. 2.
3.1.2 1. Introducere funcţie OSD GameVisual HDMI-1 3840x2160@ 60Hz Mod curse Aura Color Cycle ROG Strix XG438 HDR OFF + GameVisual Mod peisaj GamePlus Mod curse Culoare Mod cinema Imagine Mod RTS/RPG Setare PIB/PBP Mod FPS Selectare introducere Mod sRGB Configurare sistem Mod MOBA MyFavorite Mod utilizator MOVE/ENTER • • • • • • • • 3-2 BACK EXIT Mod peisaj: Aceasta este cea mai bună alegere pentru afişarea fotografiilor cu peisaje cu tehnologia video inteligentă GameVisual™.
2. GamePlus HDMI-1 3840x2160@ 60Hz Mod curse Aura Color Cycle ROG Strix XG438 HDR OFF + GameVisual Punct ochit GamePlus Temporizator Culoare Contor FPS Imagine Aliniere afişaj Setare PIB/PBP Selectare introducere Configurare sistem MyFavorite MOVE/ENTER EXIT BACK • Punct ochit: Activaţi funcţia Punct ochit. • Temporizator: Activaţi funcţia Temporizator. • Contor FPS: Activaţi funcţia Contor FPS. • Aliniere afişaj: Activaţi funcţia Aliniere afişaj.
Meniul principal GamePlus GamePlus-Punct ochit Punct ochit (Practice (Practice Mode) Mode) Temporizator Contor FPS Aliniere afişaj GamePlus-Temporizator GamePlus-Contor FPS GamePlus FPS NEXT 3-4 BACK/EXIT Capitolul 3: Instrucţiuni generale
3. Culoare Selectaţi culoarea dorită a imaginii cu această funcţie. HDMI-1 3840x2160@ 60Hz Mod curse Aura Color Cycle ROG Strix XG438 HDR OFF + GameVisual Strălucire 90 GamePlus Contrast 80 Saturație Culoare Culoare temperatură Imagine Gama Setare PIB/PBP Selectare introducere Configurare sistem MyFavorite MOVE/ENTER BACK EXIT • Strălucire: Intervalul de reglare este de la 0 la 100. • Contrast: Intervalul de reglare este de la 0 la 100.
4. Imagine Puteţi regla OD, Control aspect, ASCR, Adaptive-Sync/FreeSync, Filtru Lumină Albastră, HDR, Ajustare dinamică şi Amplificare umbră din această funcţie principală.
• Amplificare umbră: Reglarea curbei gama a monitorului prin ameliorarea culorilor închise, pentru a îmbogăţi tonurile închise dintr-o imagine, conturând mai clar porţiunile şi obiectele întunecate. • Alegeţi formatul 4:3 pentru a afişa imaginea în funcţie de raportul de aspect iniţial al sursei de intrare. • Când activaţi Filtru Lumină Albastră, setările implicite ale Mod curse vor fi importate automat. • Între Nivel 1 şi Nivel 3, funcţia Strălucire poate fi configurată de utilizator.
5. Setare PIB/PBP Opţiunea Setare PIP/PBP vă permite să deschideţi una sau mai multe ferestre secundare conectate de la orice sursă video.
6.
7. Configurare sistem Reglează configuraţia sistemului.
• • • • • • • • • 8. Configurare OSD: Ajustează Pauză OSD, DDC/CI, Transparenţă, Zoom cu telecomanda şi Zoom cu tastă rap. al ecranului OSD. Limbă: Selectaţi limba OSD. Opţiunile sunt: Engleză, Franceză, Germană, Spaniolă, Italiană, Olandeză, Rusă, Poloneză, Cehă, Croată, Maghiară, Română, Portugheză, Turcă, Chineză simplificată, Chineză tradiţională, Japoneză, Coreeană, Persană, Thailandeză şi Indoneziană. Informaţii: Afişează informaţiile referitoare la monitor.
3.2 Aura AURA este un program software care controlează LEDurile colorate pe dispozitive suportate, cum ar fi monitoare, plăci de bază, plăci video, PCuri desktop, etc. Aura permite ajustarea culorilor LEDurilor RGB pe aceste dispozitive şi selectarea diferitelor efecte de lumină. Puteţi de asemenea să corectaţi sau să ajustaţi culoarea LEDurilor prin calibrarea acestora. Pentru a activa AURA: 1. Porniţi funcţia Aura Sync din meniul OSD. 2. Conectaţi portul monitorului USB 3.
4 Faceţi clic pentru a anula schimbările. 5 Faceţi clic pentru a aplica schimbările. Dacă conexiunea USB din amonte dintre monitor şi calculator este deconectată, pentru a continua funcţia Aura, va trebui să reconectaţi portul USB 3.0 din amonte al monitorului la calculator şi să reporniţi calculatorul.
3.3 Specificaţii Model Dimensiune panou Rezoluţie max. 3840 x 2160 Strălucire (tipic) 450 nit (tipic) Raport de contrast intrinsec (tipic) Unghi de vizualizare (CR>10) Culori afişaj Timp de răspuns Sunet de la HDMI Intrare HDMI Intrare DisplayPort PBP/PIP Port USB3.0 Căşti Difuzor Consum de energie în funcţionare 4000:1 178° (V)/178° (H) 1,07B(10bit) 4 ms (G la G ) Da HDMI2.
3.4 Depanare (FAQ) Problemă Soluţie posibilă LED-ul de alimentare nu este PORNIT • Apăsaţi butonul pentru a verifica dacă monitorul este în modul PORNIT. • Verificaţi conectarea corectă a cablului de alimentare la monitor şi la priza electrică. • Consultaţi starea pentru funcţia Indicator alimentare din OSD-ul meniului principal. Selectaţi „PORNIT” pentru a activa LED-ul de alimentare. LED-ul de alimentare este • Verificaţi dacă monitorul şi computerul sunt în de culoare aurie şi nu mod PORNIT.
Următoarea funcţie este dezactivată automat. • Sincronizare adaptativă/ Sincronizare liberă (Adaptive-Sync/ FreeSync) • HDR decodificat • Ajustare dinamică Modul PIP/PBP este dezactivat automat. Imaginea nu este afişată pe ecranul complet în modul PBP. • Setarea modului PIP/PBP va dezactiva funcţia Sincronizare adaptativă/Sincronizare liberă (Adaptive-Sync/FreeSync) şi HDR decodificat în mod automat.
3.
HDMI 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 Tabel de frecvenţe acceptate 640 x 480 la 60 Hz 640 x 480 la 67 Hz 640 x 480 la 72 Hz 640 x 480 la 75 Hz 720 x 400 la 70 Hz 800 x 600 la 56 Hz 800 x 600 la 60 Hz 800 x 600 la 72 Hz 800 x 600 la 75 Hz 1024 x 768 la 60 Hz 1024 x 768 la 70 Hz 1024 x 768 la 75 Hz 1152 x 864 la 75 Hz 1280 x 720 la 60 Hz 1280 x 960 la 60 Hz 1280 x 1024 la 60 Hz 1440 x 900 la 60 Hz 1680 x 1050 la 60 Hz 1920 x 1080 la 50 Hz 1920 x 1080 la 60 Hz 2