VELKÝ HERNÍ DISPLEJ
Obsah Upozornění................................................................................................... iii Bezpečnostní informace............................................................................. iv Péče a údržba............................................................................................. viii 1.1 Vítejte............................................................................................. 1-1 1.2 Obsah balení.................................................
Upozornění Prohlášení pro Federální komunikační komisi Toto zařízení vyhovuje části 15 předpisů FCC. Provoz vyžaduje splnění následujících dvou podmínek: • Toto zařízení nesmí způsobovat škodlivé rušení. • Toto zařízení musí přijmout veškeré přijaté rušení, včetně rušení, které by mohlo způsobit nežádoucí činnost. Toto zařízení bylo testováno a bylo shledáno, že vyhovuje omezením pro digitální zařízení třídy B, dle části 15 pravidel Federální komunikační komise (FCC).
Bezpečnostní informace iv • Před přípravou monitoru k použití si pečlivě přečtěte veškerou dodávanou dokumentaci. • Aby nedošlo k požáru nebo zásahu elektrickým proudem, nevystavujte monitor dešti ani vlhkosti. • Nepokoušejte se rozebírat kryt monitoru. Uvnitř je vysoké napětí, které by mohlo způsobit úraz. • Při poruše napájecího zdroje se jej nepokoušejte opravovat. Obraťte se na kvalifikovaného servisního technika nebo prodejce.
• Použijte adaptér ADP-280BB B společnosti DELTA. VAROVÁNÍ Používáním jiných než určených extraaurálních nebo intraaurálních sluchátek může dojít ke ztrátě sluchu způsobené nadměrným hlukem.
Zabraňte přepadnutí Při používání displeje jej upevněte ke zdi šňůrou nebo řetězem, které udrží hmotnost monitoru, aby bylo zabráněno pádu monitoru. Instalaci musí provést kvalifikovaný technik a další informace vám poskytne váš dodavatel. 1 Šroub M4 nebo M6 M4 or M6 Screw Cord Kabel 2 Cordnebo or chain Kabel řetěz • Pokud je napájecí kabel opatřen tříkolíkovou zástrčkou, zapojte kabel do uzemněné tříkolíkové zásuvky.
• VŽDY používejte skříňky, stojany nebo způsoby instalace doporučené výrobcem produktu. • VŽDY používejte nábytek, který dokáže výrobek udržet. • VŽDY zajistěte, aby výrobek nepřesahoval nábytek, na kterém je umístěn. • VŽDY poučte děti o nebezpečí, které hrozí při lezení na nábytek, když se budou snažit dostat k výrobku nebo jeho ovládacím prvkům. • VŽDY veďte kabely připojené k výrobku tak, aby o ně nikdo neklopýtal, netahal za ně a nechytal je. • NIKDY nepokládejte výrobek na nestabilní místo.
Péče a údržba • Před zvednutím nebo přemístěním monitoru je lepší odpojit signálový a napájecí kabel. Při zvedání monitoru dodržujte postupy správného zvedání. Při zvedání nebo přenášení držte monitor za okraje. Nezvedejte monitor za stojan nebo kabel. • Čištění. Vypněte monitor a odpojte napájecí kabel. Povrch monitoru čistěte hadříkem, který nedře a nepouští vlákna. Odolné skvrny lze odstranit hadříkem navlhčeným v jemném čistícím prostředku.
Kde najdete další informace Další informace a aktualizace produktu a softwaru jsou dostupné z níže uvedených zdrojů. 1. Web ASUS Celosvětový web ASUS nabízí aktualizované informace o hardwaru a softwaru ASUS. Viz http://www.asus.com 2. Volitelná dokumentace S produktem může být dodávána volitelná dokumentace, poskytovaná prodejcem. Tyto dokumenty nejsou standardní součástí balení.
1.1 Vítejte Děkujeme, že jste zakoupili LCD monitor ASUS®! Nejnovější širokoúhlý LCD monitor firmy ASUS poskytuje čistší, širší a jasnější zobrazení a navíc řadu funkcí zlepšujících váš zážitek z obrazu. Díky bohaté nabídce funkcí si můžete vychutnat pohodlí a krásné zobrazení, kterým se tento monitor vyznačuje! 1.
1.3 Sestavení monitoru Pokyny pro sestavení monitoru: 1-2 1. Vyjměte čtyři pojistky z dolní části papírové krabice. 2. Sejměte horní část papírové krabice.
3. Z horního polystyrenového dílu vyjměte papírovou krabičku s příslušenstvím. 4. Sejměte horní polystyrenový díl. 5. Vyjměte monitor.
6. Pomocí šroubováku nainstalujte projektor AuraSync.
1.4 Připojení kabelů 1.4.1 Zadní strana LCD monitoru 1 2 3 4 5 HDMI-3 7 HDMI-4 6 13 HDMI-2 8 HDMI-1 9 AURA SYNC 10 1. Audio vstup 2. Sluchátkový konektor 3. Port USB pro stahování dat 4. Port USB pro stahování dat 5. Port USB pro odesílání dat 6. Port HDMI-4 (V2.0) 7. Port HDMI-3 (V2.0) 8. Port HDMI-2 (V2.1) podporuje 4K 120 Hz 9. Port HDMI-1 (V2.1) podporuje 4K 120 Hz 11 DCIN 12 10. DisplayPort 11. Port AURA SYNC 12. Port vstupu stejnosměrného napájení 13.
1.5 Představení monitoru 1.5.1 Používání ovládacího tlačítka Nastavte monitor pomocí ovládacího tlačítka na zadní části monitoru. 6 5 4 3 2 1 1. Indikátor napájení: • 2. Stav Popis Bílá ZAPNUTO Oranžová Režim připravenosti VYPNUTO VYPNUTO Tlačítko Napájení: • 3. Stiskem tohoto tlačítka zapnete/vypnete monitor. GameVisual: • Toto je rychlé tlačítko. Výchozí nastavení je GameVisual. • Toto je rychlé tlačítko. Výchozí nastavení je Výběr vstupu. 4. Výběr vstupu: 5.
2.1 Nastavení monitoru • V zájmu optimálního pozorování doporučujeme podívat se tak, abyste viděli celou plochu monitoru, a pak nastavit sklon, který vám nejvíc vyhovuje. • Při nastavování sklonu držte stojan, aby monitor nespadl. • Sklon monitoru můžete nastavit v rozmezí -5˚ až 10˚. -5 ~ 10 Je normální, že se monitor při nastavování úhlu mírně třese.
2.2 Vnější rozměry Jednotky: mm [palce] 10 06 01 名稱:Rear IO 顏色:深鈦色 材質:塑膠 表面處理:凹刻 / 底部拋亮8000番 (形狀與符號) 名稱:中框 顏色:深鈦色 材質:塑膠 表面處理:MT11015 08 名稱:Rear IO 顏色:深鈦色 材質:塑膠 表面處理:凹刻 / 底部拋亮8000番 (形狀與符號) 名稱:AURA SYNC ICON 09 綠色區塊凹刻0.
2.3 Odpojení ramena/stojanu (pro upevnění na stěnu VESA) Odnímatelný stojan monitoru je speciálně navržen pro upevnění na stěnu VESA. Odpojení ramena/stojanu 1. Odpojte napájecí a signálové kabely. 2. Sejměte kryt vstupů/výstupů ze zadního krytu (1) a potom vyjměte šroubovák z krytu vstupů/výstupů (2). 3. Odmontujte čtyři (4) šroubky, které zajišťují rameno k zadní straně monitoru. 4. Odpojte stojan (rameno a základnu) od monitoru.
3.1 Nabídka OSD (On-Screen Display) 3.1.1 Změna konfigurace HDMI-4 3840x2160 @ 60Hz Režim Závod Aura OFF ROG Strix XG43UQ HDR OFF Hry Přetaktování Obraz Proměnné OD Barva AMD FreeSync Premium Pro Výběr vstupu ELMB/ELMB SYNC Nastavení PIP/PBP GamePlus Efekt osvětlení GameVisual MyFavorite Shadow Boost Nastavení systému MOVE/ENTER BACK EXIT 1. Stisknutím středu 5 směrného tlačítka zobrazte nabídku OSD. 2. Stisknutím tlačítek Nahoru a Dolů přepínejte možnosti v nabídce.
3.1.2 1. Představení funkcí OSD Hry HDMI-4 3840x2160 @ 60Hz Režim Závod Aura OFF ROG Strix XG43UQ HDR OFF Hry Přetaktování Obraz Proměnné OD Barva AMD FreeSync Premium Pro Výběr vstupu ELMB/ELMB SYNC Nastavení PIP/PBP GamePlus Efekt osvětlení GameVisual MyFavorite Shadow Boost Nastavení systému MOVE/ENTER • • • • • BACK EXIT Přetaktování: Tato funkce umožňuje upravit obnovovací kmitočet. Proměnné OD: Tato funkce umožňuje upravit úroveň OD. Obsahuje Úroveň 0~Úroveň 5.
2. • GameVisual: Tato funkce nabízí osm dílčích funkcí, které vybíráte podle toho, co se vám líbí(S režimem XBOX pro vydání XBOX; s režimem Scéna pro normální vydání). • Shadow Boost: Vylepšení tmavých barev: upravuje křivku gamma monitoru pro obohacení tmavých tónů v obrazu. Umožňuje snadnější orientaci v tmavých záběrech a mezi tmavými objekty.
• Výběrem možnosti 4:3 se obraz zobrazí v původním poměru stran vstupního zdroje. • Když je aktivován Filtr Modrého Světla, budou automaticky naimportována výchozí nastavení Režim Závod. • Mezi Úroveň 1 a Úroveň 3 může funkci Jas konfigurovat uživatel. • Úroveň 4 je optimalizované nastavení. Splňuje podmínky certifikátu TUV pro nízké vyzařování modrého světla. Funkci Jas nelze konfigurovat.
3. Barva Tato funkce umožňuje nastavit barvu obrazu. HDMI-4 3840x2160 @ 60Hz Režim Závod Aura OFF ROG Strix XG43UQ HDR OFF Hry Teplota barev Obraz Gamma Barva Sytost Výběr vstupu Nastavení PIP/PBP Efekt osvětlení MyFavorite Nastavení systému MOVE/ENTER BACK EXIT • Teplota barev: Obsahuje tři přednastavené barevné režimy (Studené, Normální, Teplé) a Uživatelský režim. • Gamma: Obsahuje tři režimy gamma: 1.8, 2.2, 2.5. • Sytost: Rozsah nastavení je 0 až 100.
4. Výběr vstupu Vyberte zdroj vstupu: • HDMI-1(v 2.1), HDMI-2(v 2.1), HDMI-3(v 2.0), HDMI-4(v 2.0) a DisplayPort HDMI-4 3840x2160 @ 60Hz Režim Závod Aura OFF ROG Strix XG43UQ HDR OFF Hry HDMI-1(v 2.1) Obraz HDMI-2(v 2.1) Barva HDMI-3(v 2.0) Výběr vstupu HDMI-4(v 2.0) Nastavení PIP/PBP DisplayPort Efekt osvětlení MyFavorite Nastavení systému MOVE/ENTER 5. BACK EXIT Nastavení PIP/PBP Nastavení PIP/PBP umožňuje otevřít menší okno(a) s obrazem z libovolného zdroje videa.
• Velikost PIP: Slouží k nastavení velikosti okna PIP „Malý“, „Střední“ nebo „Velký“. • 6. Zapnutím funkce PIP/PBP bude deaktivována technologie AMD FreeSync Premium Pro a Dynamické ztmavení. Efekt osvětlení HDMI-4 3840x2160 @ 60Hz Režim Závod Aura OFF ROG Strix XG43UQ HDR OFF Hry Aura Sync Obraz Aura RGB Barva Výběr vstupu Nastavení PIP/PBP Efekt osvětlení MyFavorite Nastavení systému MOVE/ENTER 7.
8. Nastavení systému Nastavení konfigurace systému.
• Zámek kláves: Slouží k deaktivaci funkcí všech tlačítek. Stisknutím a podržením tlačítka dolů déle než pět sekund deaktivujte funkci zámku tlačítek. • Nastavení OSD: Slouží k úpravám položek Časový interval OSD, DDC/CI, Průhlednost, Zoom dálk ovladačem a Zoom rychl tlačítk obrazovky OSD. • Datový tok DisplayPort: Vyberte DP 1.2 nebo DP 1.4 pro kompatibilitu grafické karty. • DSC: Komprese streamu zobrazení DisplayPort • Informace: Zobrazení informací o monitoru.
3.2 Aura Armoury Create je softwarový program, který řídí plnobarevné LED v podporovaných zařízeních, jako jsou například monitory, základní desky, grafické karty, stolní počítače atd. Aura umožňuje upravit barvu RGB LED v těchto zařízeních a vybírat různé světelné efekty. Můžete rovněž opravovat nebo upravovat barvu LED jejich kalibrací. Pokyny pro aktivaci funkce Aura: 1. ZAPNĚTE funkci Aura Sync v nabídce OSD. 2. Připojte port USB 3.0 pro odesílání dat monitoru k portu USB vašeho počítače. 3.
3.3 Specifikace Model Velikost panelu Max. rozlišení Jas (typ.) Intrinsický kontrastní poměr (typ.) Pozorovací úhel (CR>10) Zobrazované barvy XG43UQ Širokoúhlý, 43” (109,22 cm) 3840 x 2160 750 nitů (typicky) 4000:1 178° (V) / 178° (H) 16,7 M Doba odezvy 1 ms (MPRT) Zvuk z HDMI Ano Vstup HDMI HDMI2.1 x 2, HDMI2.0 x 2 Vstup DisplayPort1.4 Ano Audio vstup Ano PBP/PIP Port USB3.
3-12 Teplota (provozní) 0°C ~ 35°C Jmenovité napětí 100~240 Vstř (zabudovaný) Kapitola 3: Obecné pokyny
3.4 Řešení potíží (FAQ) Problém Možné řešení LED kontrolka napájení nesvítí • Stisknutím tlačítka ověřte, zda je monitor zapnutý. • Zkontrolujte, zda je dobře zapojen napájecí kabel mezi monitor a zásuvku elektrické sítě. • Zkontrolujte funkci indikátoru napájení v hlavní nabídce OSD. Výběrem „ZAPNUTO“ zapnete indikátor LED napájení. Kontrolka napájení • Ověřte, zda je monitor a počítač zapnutý.
Následující funkce je • Nastavením režimu PIP/PBP bude automaticky automaticky deaktivována. deaktivována technologie AMD FreeSync • AMD FreeSync Premium Premium Pro a dekódované HDR. Pro • Po vypnutí režimu PIP/PBP lze vybrat • Dekódované HDR technologii AMD FreeSync Premium Pro.
3.
Časování obrazu 640 x 480P, 60 Hz 720 x 480P, 60 Hz 720 x 576P, 50 Hz 1280 x 720P, 50 Hz 1280 x 720P, 60 Hz 1280 x 720P, 60 Hz 1440 x 480P, 60 Hz 1440 x 480P, 60 Hz 1440 x 576P, 50 Hz 1920 x 1080i, 50 Hz 1920 x 1080P, 50 Hz 1920 x 1080i, 60 Hz 1920 x 1080i, 60 Hz 1920 x 1080P, 60 Hz 1920 x 1080P, 119,88 Hz 1920 x 1080P, 120 Hz 3840 x 2160P, 24 Hz 3840 x 2160P, 25 Hz 3840 x 2160P, 30 Hz 3840 x 2160P, 50 Hz 3840 x 2160P, 60 Hz HDMI2.0 V V V V V V V V V V V V V V V V V V V V V HDMI2.