User Manual
Table Of Contents
- 1. Knowing BIOS
- 2. BIOS setup program
- 3. My Favorites
- 4. Main menu
- 5. Ai Tweaker menu
- 6. Advanced menu
- 6.1 Platform Misc Configuration
- 6.2 CPU Configuration
- 6.3 System Agent (SA) Configuration
- 6.4 PCH Configuration
- 6.5 PCH Storage Configuration
- 6.6 PCH-FW Configuration
- 6.7 Thunderbolt(TM) Configuration
- 6.8 Trusted Computing
- 6.9 PCI Subsystem Settings
- 6.10 USB Configuration
- 6.11 Network Stack Configuration
- 6.12 NVMe Configuration
- 6.13 Onboard Devices Configuration
- 6.14 APM Configuration
- 6.15 HDD/SSD SMART Information
- 7. Monitor menu
- 8. Boot menu
- 9. Tool menu
- 10. Exit menu
- 11. Updating BIOS
38
ROG STRIX Z590 Series BIOS Manual
1-Core - 6-Core Active
Configuration options: [Auto] [Enabled]
The following items appear only when 1-Core - 6-Core Active is set to [Enabled].
Temperature A
Package passing this temperature threshold will engage the negative ratio offset
specified in Negative Ratio Offset A. Unit in Degree Celsius.
Configuration options: [Auto] [1] - [115]
Negative Ratio Offset A
This will be the potential negative offset to respective ratio when package temperature
rises above threshold specified in Temperature A.
Configuration options: [Auto] [User Specify]
The following items appear only when Negative Ratio Offset A is set to [User Specify].
Ratio Offset
Use the <+> and <-> keys to adjust the value.
Configuration options: [0] - [31]
Temperature B
This can be the second additional temperature threshold which when exceeded, will
stack an additional -1x ratio offset to the setting in Negative Ratio Offset A. Should
logically be higher than Temperature A. Unit in Degree Celsius.
Configuration options: [Auto] [1] - [115]
Negative Ratio Offset B
This will be the potential negative offset to respective ratio when package temperature
rises above threshold specified in Temperature B.
Configuration options: [Auto] [User Specify]
The following items appear only when Negative Ratio Offset B is set to [User Specify].
Ratio Offset
Use the <+> and <-> keys to adjust the value.
Configuration options: [0] - [31]
V/F Point Offset
Offset Mode Sign 1-8
Configuration options: [-] [+]
V/F Point 1-8 Offset
Configuration options: [Auto] [0.001] - [0.999]