User Manual
Table Of Contents
- 1. Knowing BIOS
- 2. BIOS setup program
- 3. My Favorites
- 4. Main menu
- 5. Ai Tweaker menu
- 6. Advanced menu
- 6.1 Platform Misc Configuration
- 6.2 CPU Configuration
- 6.3 System Agent (SA) Configuration
- 6.4 PCH Configuration
- 6.5 PCH Storage Configuration
- 6.6 PCH-FW Configuration
- 6.7 Thunderbolt(TM) Configuration
- 6.8 Trusted Computing
- 6.9 PCI Subsystem Settings
- 6.10 USB Configuration
- 6.11 Network Stack Configuration
- 6.12 NVMe Configuration
- 6.13 HDD/SSD SMART Information
- 6.14 APM Configuration
- 6.15 Onboard Devices Configuration
- 6.16 Intel(R) Rapid Storage Technology
- 7. Monitor menu
- 8. Boot menu
- 9. Tool menu
- 10. Exit menu
- 11. Updating BIOS
ROG STRIX Z690 SERIES BIOS Manual
33
The following item appears only when Dynamic Memory Boost is set to [Disabled].
Realtime Memory Frequency
Allows you to enable or disable Memory Frequency feature. Allows manual switching
between in runtime between default SPD Profile frequency and selected XMP profile
frequency. Only valid if an XMP Profile is selected.
Configuration options: [Disabled] [Enabled]
SA GV
System Agent Geyserville. Can disable, fix to a specific point, or enable frequency
switching. If enabled, we recommend you to leave options at parked values for best
compatibility. Enabling this feature requires a longer boot time.
Configuration options: [Disabled] [Enabled] [Fixed to 1st Point] [Fixed to 2nd Point]
[Fixed to 3rd Point] [Fixed to 4th Point]
The following items appear only when SA GV is set to [Enabled], [Fixed to 1st Point],
[Fixed to 2nd Point], [Fixed to 3rd Point], or [Fixed to 4th Point].
First Point Frequency
Allows you to specify the frequency for the given point. 0-MRC auto, else a specific
frequency as an integer: 2000Mhz.
Configuration options: [0] - [65535]
First Point Gear
Allows you to set the gear ratio for this SAGV point. 0-Auto, 1-G1, 2-G2, 4-G4.
Configuration options: [0] - [4]
Second Point Frequency
Allows you to specify the frequency for the given point. 0-MRC auto, else a specific
frequency as an integer: 2000Mhz.
Configuration options: [0] - [65535]
Second Point Gear
Allows you to set the gear ratio for this SAGV point. 0-Auto, 1-G1, 2-G2, 4-G4.
Configuration options: [0] - [4]
Third Point Frequency
Allows you to specify the frequency for the given point. 0-MRC auto, else a specific
frequency as an integer: 2000Mhz.
Configuration options: [0] - [65535]
Third Point Gear
Allows you to set the gear ratio for this SAGV point. 0-Auto, 1-G1, 2-G2, 4-G4.
Configuration options: [0] - [4]
The Fourth Point Gear will always be the settings you set in the main menu, so configure
the Fourth Point Gear there.
Digi+ VRM
VRM Initialization Check
When any error occurs during VRM initialization, the system will hang at POST code
76/77 if this function is enabled.
Configuration options: [Disabled] [Enabled]
CPU Input Voltage Load-line Calibration
Configuration options [Auto] [Level 1] [Level 2] [Level 3]