User Manual
Table Of Contents
- 1. Knowing BIOS
- 2. BIOS setup program
- 3. My Favorites
- 4. Main menu
- 5. Ai Tweaker menu
- 6. Advanced menu
- 6.1 Platform Misc Configuration
- 6.2 CPU Configuration
- 6.3 System Agent (SA) Configuration
- 6.4 PCH Configuration
- 6.5 PCH Storage Configuration
- 6.6 PCH-FW Configuration
- 6.7 Thunderbolt(TM) Configuration
- 6.8 Trusted Computing
- 6.9 PCI Subsystem Settings
- 6.10 USB Configuration
- 6.11 Network Stack Configuration
- 6.12 NVMe Configuration
- 6.13 HDD/SSD SMART Information
- 6.14 APM Configuration
- 6.15 Onboard Devices Configuration
- 6.16 Intel(R) Rapid Storage Technology
- 7. Monitor menu
- 8. Boot menu
- 9. Tool menu
- 10. Exit menu
- 11. Updating BIOS
ROG STRIX Z690 SERIES BIOS Manual
41
SA PLL Frequency Override
Allows you to configure Sa PLL Frequency.
Configuration options: [Auto] [3200 MHz] [1600 MHz]
BCLK TSC HW Fixup
Allows you to enable or disable BCLK TSC HW Fixup disable during TSC copy from
PMA to APIC.
Configuration options: [Enabled] [Disabled]
Core Ratio Extension Mode
Allows you to enable or disable Core Ratio Above 85 Extension Mode.
[Disabled] Max Overclocking Ratio Limit as specified by OCMB 0x1 command
is 85.
[Enabled] Max Overclocking Ratio Limit as specified by OCMB 0x1 command
is 120.
FLL OC mode
Configuration options: [Auto] [Disabled] [Normal] [Elevated] [Extreme Elevated]
Core PLL Voltage
Allows you to configure the offset for the Core PLL VCC Trim. Use the <+> and <->
keys to adjust the value. The values range from 0.900V to 1.845V with an interval of
0.015V.
Configuration options: [Auto] [0.90000] - [1.84500]
GT PLL Voltage
Allows you to configure the offset for the GT PLL VCC Trim. Use the <+> and <->
keys to adjust the value. The values range from 0.900V to 1.845V with an interval of
0.015V.
Configuration options: [Auto] [0.90000] - [1.84500]
Ring PLL Voltage
Allows you to configure the offset for the Ring PLL VCC Trim. Use the <+> and <->
keys to adjust the value. The values range from 0.900V to 1.845V with an interval of
0.015V.
Configuration options: [Auto] [0.90000] - [1.84500]
System Agent PLL Voltage
Allows you to configure the offset for the System Agent PLL VCC Trim. Use the <+>
and <-> keys to adjust the value. The values range from 0.900V to 1.845V with an
interval of 0.015V.
Configuration options: [Auto] [0.90000] - [1.84500]
Memory Controller PLL Voltage
Allows you to configure the offset for the Memory Controller PLL VCC Trim. Use the
<+> and <-> keys to adjust the value. The values range from 0.900V to 1.845V with
an interval of 0.015V.
Configuration options: [Auto] [0.90000] - [1.84500]
CPU 1.8V Small Rail
Allows you to configure the voltage for the CPU 1.8V Small Rail. Use the <+> and <->
keys to adjust the value. The values range from 1.500V to 2.300V with an interval of
0.010V.
Configuration options: [Auto] [1.50000] - [2.30000]