User Manual
Table Of Contents
- 1. Knowing BIOS
- 2. BIOS setup program
- 3. My Favorites
- 4. Main menu
- 5. Ai Tweaker menu
- 6. Advanced menu
- 6.1 Platform Misc Configuration
- 6.2 CPU Configuration
- 6.3 System Agent (SA) Configuration
- 6.4 PCH Configuration
- 6.5 PCH Storage Configuration
- 6.6 PCH-FW Configuration
- 6.7 Thunderbolt(TM) Configuration
- 6.8 Trusted Computing
- 6.9 PCI Subsystem Settings
- 6.10 USB Configuration
- 6.11 Network Stack Configuration
- 6.12 NVMe Configuration
- 6.13 HDD/SSD SMART Information
- 6.14 APM Configuration
- 6.15 Onboard Devices Configuration
- 6.16 Intel(R) Rapid Storage Technology
- 7. Monitor menu
- 8. Boot menu
- 9. Tool menu
- 10. Exit menu
- 11. Updating BIOS
ROG STRIX Z690 SERIES BIOS Manual
47
The following item appears only when CPU System Agent Voltage is set to [Offset
Mode].
CPU System Agent Voltage Offset
Allows you to configure the CPU System Agent Voltage offset value. Use the <+> or <-> to
adjust the value. The values range from 0.001V to 0.999V with an interval of 0.001V.
Configuration options: [Auto] [0.00100] - [0.99900]
You need to save the changes and reset the system for the changes to take effect.
CPU Input Voltage
Allows you to configure the voltage for the CPU Input. Use the <+> or <-> to adjust the
value. The values range from 1.500V to 2.100V with an interval of 0.010V.
Configuration options: [Auto] [1.50000] - [2.10000]
High DRAM Voltage Mode
If this item is set to [Disabled], the upper range for DRAM Voltage will be 1.435V. If this item
is set to [Enabled], the upper range will be 2.070V. If enabled on non-supported DRAM, the
voltage will be lower than requested.
Configuration options: [Auto] [Disabled] [Enabled]
DRAM VDD Voltage
Power for the DRAM ICs’ VDD portion. Use the <+> or <-> to adjust the value. The values
range from 0.800V to 1.435V with an interval of 0.005V.
Configuration options: [Auto] [0.80000] - [1.43500]
DRAM VDDQ Voltage
Power for the DRAM ICs’ VDD Data portion. Use the <+> or <-> to adjust the value. The
values range from 0.800V to 1.435V with an interval of 0.005V.
Configuration options: [Auto] [0.80000] - [1.43500]
Advanced Memory Voltages
IVR Transmitter VDDQ Voltage
Allows you to set the voltage for the internal transmitter voltage for the Memory
Controller. Use the <+> or <-> to adjust the value. The values range from 0.700V to
2.200V with an interval of 0.005V.
Configuration options: [Auto] [0.70000] - [2.20000]
Memory Controller Voltage
Allows you to set the voltage for the Memory Controller. Use the <+> or <-> to adjust
the value. The values range from 1.000V to 2.000V with an interval of 0.00625V.
Configuration options: [Auto] [1.00000] - [2.00000]
PMIC Voltages
Configuration options: [Auto] [Sync All PMICs] [By per PMIC]