User Manual
Table Of Contents
- 1. Knowing BIOS
- 2. BIOS setup program
- 3. My Favorites
- 4. Main menu
- 5. Ai Tweaker menu
- 6. Advanced menu
- 6.1 Platform Misc Configuration
- 6.2 CPU Configuration
- 6.3 System Agent (SA) Configuration
- 6.4 PCH Configuration
- 6.5 PCH Storage Configuration
- 6.6 PCH-FW Configuration
- 6.7 Thunderbolt(TM) Configuration
- 6.8 Trusted Computing
- 6.9 PCI Subsystem Settings
- 6.10 USB Configuration
- 6.11 Network Stack Configuration
- 6.12 NVMe Configuration
- 6.13 HDD/SSD SMART Information
- 6.14 APM Configuration
- 6.15 Onboard Devices Configuration
- 6.16 Intel(R) Rapid Storage Technology
- 7. Monitor menu
- 8. Boot menu
- 9. Tool menu
- 10. Exit menu
- 11. Updating BIOS
ROG STRIX Z690 SERIES BIOS Manual
63
Pending operation
Allows you to schedule an operation for the security device.
Configuration options: [None] [TPM Clear]
Your computer will reboot during restart in order to change the state of Security Device.
Platform Hierarchy
Allows you to enable or disable platform hierarchy.
Configuration options: [Disabled] [Enabled]
Storage Hierarchy
Allows you to enable or disable storage hierarchy.
Configuration options: [Disabled] [Enabled]
Endorsement Hierarchy
Allows you to enable or disable endorsement hierarchy.
Configuration options: [Disabled] [Enabled]
Physical Presence Spec Version
Select to tell O.S. to support PPI Spec Version 1.2 or 1.3.
Configuration options: [1.2] [1.3]
Some HCK tests might not support 1.3.
TPM 2.0 UEFI Spec Version
Allows you to select the TCG2 Spec Version support.
[TCG_1_2] Compatible mode for Windows 8 / Windows 10.
[TCG_2] Supports new TCG2 protocol and event format for Windows 10 or later.