User Manual
Table Of Contents
- 1. Knowing BIOS
- 2. BIOS setup program
- 3. My Favorites
- 4. Main menu
- 5. Ai Tweaker menu
- 6. Advanced menu
- 6.1 Platform Misc Configuration
- 6.2 CPU Configuration
- 6.3 System Agent (SA) Configuration
- 6.4 PCH Configuration
- 6.5 PCH Storage Configuration
- 6.6 PCH-FW Configuration
- 6.7 Thermal Configuration
- 6.8 Thunderbolt(TM) Configuration
- 6.9 Trusted Computing
- 6.10 UEFI Variables Protection
- 6.11 PCI Subsystem Settings
- 6.12 USB Configuration
- 6.13 Network Stack Configuration
- 6.14 NVMe Configuration
- 6.15 HDD/SSD SMART Information
- 6.16 APM Configuration
- 6.17 Onboard Devices Configuration
- 6.18 Intel(R) Rapid Storage Technology
- 7. Monitor menu
- 8. Boot menu
- 9. Tool menu
- 10. Exit menu
- 11. Updating BIOS
ROG STRIX Z790 Series (Intel
®
14
th
) BIOS Manual
29
Primary Timings
DRAM CAS# Latency
Only Even numbers are supported on DDR5. Odd numbers will be rounded up.
Configuration options: [Auto] [2] - [66]
DRAM RAS# to CAS# Delay Read
Configuration options: [Auto] [0] - [255]
DRAM RAS# to CAS# Delay Write
Configuration options: [Auto] [0] - [255]
DRAM RAS# PRE Time
Configuration options: [Auto] [0] - [255]
DRAM RAS# ACT Time
Configuration options: [Auto] [1] - [511]
DRAM Command Rate
Configuration options: [Auto] [1N] [2N] [3N] [N:1]
The following item appears only when DRAM Command Rate is set to [N:1].
N to 1 ratio
Number of bubbles between each valid command cycle.
Configurations: [1] - [7]
Secondary Timings
DRAM RAS# to RAS# Delay L
Configuration options: [Auto] [1] - [63]
DRAM RAS# to RAS# Delay S
Configuration options: [Auto] [1] - [127]
DRAM REF Cycle Time 2
Configuration options: [Auto] [1] - [65535]
DRAM REF Cycle Time Same Bank
Configuration options: [Auto] [0] - [2047]
DRAM Refresh Interval
Configuration options: [Auto] [1] - [262143]
DRAM WRITE Recovery Time
Configuration options: [Auto] [1] - [234]
DRAM READ to PRE Time
Configuration options: [Auto] [1] - [255]
DRAM FOUR ACT WIN Time
Configuration options: [Auto] [1] - [511]
DRAM WRITE to READ Delay L
Configuration options: [Auto] [1] - [31]
DRAM WRITE to READ Delay S
Configuration options: [Auto] [1] - [31]