User’s Manual

1-8
Chapter 1: Product Introduction
Chapter 1
4. Fan and Pump headers
The Fan and Pump headers allow you to connect fans or pumps to cool the system.
CPU_FAN
CPU_OPT
AIO_PUMP
CHA_FAN1
CHA_FAN2
CHA_FAN3
CHA_FAN4
CHA_FAN5
• DO NOT forget to connect the fan cables to the fan headers. Insufficient air flow
inside the system may damage the motherboard components. These are not
jumpers! Do not place jumper caps on the fan headers!
• Ensure the cable is fully inserted into the header.
• For water cooling kits, connect the pump connector to the AIO_PUMP header.
• When connecting a single CPU fan, you may connect it to either the CPU_FAN or
CPU_OPT header.
• When connecting two CPU fans, ensure to connect the fans to the CPU_FAN and
the CPU_OPT header, and make sure both fans are the same brand and model.
Header Max. Current Max. Power Default Speed Shared Control
CPU_FAN 1A 12W Q-Fan Controlled A
CPU_OPT 1A 12W Q-Fan Controlled A
CHA_FAN1 1A 12W Q-Fan Controlled -
CHA_FAN2 1A 12W Q-Fan Controlled -
CHA_FAN3 1A 12W Q-Fan Controlled -
CHA_FAN4 1A 12W Q-Fan Controlled -
CHA_FAN5 1A 12W Q-Fan Controlled -
AIO_PUMP 1A 12W Full Speed -