User’s Manual

2-4
Chapter 2: Basic Installation
Chapter 2
1. Loosen the screws from the M.2 heatsinks.
2. Lift and remove the heatsinks.
2.3 M.2 module installation
• The illustrations only show the installation steps for a 22110 M.2 slot, the steps are
the same for the other M.2 slots.
• Use a Phillips screwdriver when removing or installing the screws or screw stands
mentioned in this section.
• If the thermal pad on the M.2 heatsink becomes damaged, we recommend replacing
it with the bundled thermal pad or a thermal pad with a thickness of 1.25mm.
• Supported M.2 type varies per motherboard.
2
2
2
2
1 1
1
1
1 1
11