User’s Manual
Table Of Contents
- Safety information
- Chapter 1: Product Introduction
- Chapter 2: Basic Installation
- 2.1 Building your PC system
- 2.1.1 CPU installation
- 2.1.2 Cooling system installation
- 2.1.3 DIMM installation
- 2.1.4 M.2 installation
- 2.1.5 Motherboard installation
- 2.1.6 ATX power connection
- 2.1.7 SATA device connection
- 2.1.8 Front I/O connector
- 2.1.9 Expansion card installation
- 2.1.10 Wi-Fi moving antenna installation
- 2.1.11 ROG Reusable Cable Organizer
- 2.2 BIOS update utility
- 2.3 Clear CMOS button
- 2.4 Motherboard rear and audio connections
- 2.5 Starting up for the first time
- 2.6 Turning off the computer
- 2.1 Building your PC system
- Chapter 3: BIOS and RAID Support
- Appendix
2-30
Chapter 2: Basic Installation
Chapter 2
2.4 Motherboard rear and audio connections
2.4.1 Rear I/O connection
* and ** : Refer to the tables on the next page for LAN port LEDs, and audio port definitions.
Rear panel connectors
1. DisplayPort
2. USB 2.0 ports 11 and 12
3. USB 3.2 Gen 1 Type-A ports E1, E2, E3, and E4
4. USB 3.2 Gen 2 Type-A port 5
5. Intel
®
2.5Gb Ethernet port*
6. HDMI
®
port
7.
Clear CMOS button (CLR_CMOS). Press this button to clear the BIOS setup
information only when the systems hangs due to overclocking.
8. BIOS FlashBack™ button
9. USB 3.2 Gen 2x2 Type-C
®
port C3
10. USB 3.2 Gen 2 Type-A port 7
11. USB 3.2 Gen 2 Type-C
®
port C6
12. Wi-Fi Module
13. Optical S/PDIF OUT port
14. Gold-plated audio jacks**
We strongly recommend that you connect your devices to ports with matching data
transfer rate. For example connecting your USB 3.2 Gen 1 devices to USB 3.2 Gen 1
ports for faster and better performance for your devices.