User Guide
Table Of Contents
- Notices
- Safety information
- Care & Cleaning
- Takeback Services
- Product information for EU energy label
- Chapter 1: Product introduction
- 1.1 Welcome!
- 1.2 Package contents
- 1.3 Monitor introduction
- Chapter 2: Setup
- 2.1 Assembling the monitor arm/base
- 2.2 Cable management
- 2.3 Adjusting the monitor
- 2.4 Detaching the arm (for VESA wall mount)
- 2.5 Connecting the cables
- 2.6 Turning on the monitor
- Chapter 3: General instructions
- 3.1 OSD (On-Screen Display) menu
- 3.2 Aura
- 3.3 Specifications summary
- 3.4 Outline dimensions
- 3.5 Troubleshooting (FAQ)
- 3.6 Supported operating mode
1-3ASUS PG27AQN Series LCD Monitor
4.
button
• Default: GameVisual.
• To change the shortcut function, go to the Shortcut > Shortcut 2
menu.
• Turns on the OSD menu when the monitor enters standby mode or
displays the “NO SIGNAL“ message.
5. Power button/power indicator
• Turns the monitor on/off.
• The color definition of the power indicator is as the below table.
Status Description
White
ON
OFF OFF
Amber ashing Entering standby mode/No signal
Amber Standby mode
Green HDR/HDR+G-SYNC
Red G-SYNC
6. Ambient light sensor.
1.3.2 Back view
1 2 3 4 5 6 7 8 9
10
12
11
1. DC IN port. This port connects the power cord.
2. For service personnel only.
3. HDMI-1 port. This port is for connection with an HDMI compatible
device.
4. HDMI-2 port. This port is for connection with an HDMI compatible
device.
5. HDMI-3 port. This port is for connection with an HDMI compatible
device.
6. DisplayPort. This port is for connection for a DisplayPort compatible device.
7. USB 3.2 Gen 1 Type-B. This port is for connection with a USB upstream
cable. The connection enables the USB ports on the monitor.