User Guide
Table Of Contents
- Notices
- Safety information
- Care & Cleaning
- Takeback Services
- Product information for EU energy label
- Chapter 1: Product introduction
- 1.1 Welcome!
- 1.2 Package contents
- 1.3 Monitor introduction
- Chapter 2: Setup
- 2.1 Assembling the monitor arm/base
- 2.2 Cable management
- 2.3 Adjusting the monitor
- 2.4 Detaching the arm (for VESA wall mount)
- 2.5 Connecting the cables
- 2.6 Turning on the monitor
- Chapter 3: General instructions
- 3.1 OSD (On-Screen Display) menu
- 3.2 Aura
- 3.3 Specifications summary
- 3.4 Outline dimensions
- 3.5 Troubleshooting (FAQ)
- 3.6 Supported operating mode
1-4 Chapter 1: Product introduction
8. USB 3.2 Gen 1 Type-A (red port) with NVIDIA Reflex Latency Analyzer.
This port is for connection with USB devices, such as USB keyboard/mouse,
USB flash drive, etc. This port is specifically for connection with your wired or
wireless mouse to enable NVIDIA Reflex Latency Analyzer.
9. USB 3.2 Gen 1 Type-A (blue port). This port is for connection with USB
devices, such as USB keyboard/mouse, USB flash drive, etc.
10. Earphone jack. This port is only available when an HDMI/DisplayPort cable
is connected.
11. Kensington lock slot.
12. Control buttons.
1.3.3 G-SYNC HDR
The monitor supports HDR format. When detecting HDR content, an "HDR ON"
message will pop up and display in the OSD menu.
• When displaying HDR content, the following function(s) are not available:
Blue Light Filter, DP SDR YCbCr sRGB Gamma, HDMI SDR YCbCr sRGB
Gamma, Auto SDR Brightness.
• NVIDIA Pascal GPU Graphics Card like GTX1070, GTX1080 and
GTX1080 Ti or higher is required.