User Guide
Table Of Contents
- Notices
- Safety information
- Care & Cleaning
- Takeback Services
- Product information for EU energy label
- Chapter 1: Product introduction
- 1.1 Welcome!
- 1.2 Package contents
- 1.3 Monitor introduction
- Chapter 2: Setup
- 2.1 Assembling the monitor arm/base
- 2.2 Cable management
- 2.3 Adjusting the monitor
- 2.4 Detaching the arm (for VESA wall mount)
- 2.5 Connecting the cables
- 2.6 Turning on the monitor
- Chapter 3: General instructions
- 3.1 OSD (On-Screen Display) menu
- 3.2 Aura
- 3.3 Specifications summary
- 3.4 Outline dimensions
- 3.5 Troubleshooting (FAQ)
- 3.6 Supported operating mode
3-1ASUS PG27AQN Series LCD Monitor
3.1 OSD (On-Screen Display) menu
3.1.1 Howtorecongure
Gaming
Image
Color
Input Select
Input Select
DisplayPort
2560x1440 360 Hz
Mouse
Analyzer Inactive
HDR
OFF
G-SYNC®
Processor
NVIDIA Reflex Latency Analyzer
1. Press the ( ) button to activate the OSD menu.
2. Move the ( ) button up/down to navigate through the functions.
Highlight the desired function and press the ( ) button to activate it. If
the function selected has a sub-menu, move the ( ) button up/down
again to navigate through the sub-menu functions. Highlight the desired sub-
menu function and press the ( ) button or move the ( ) button
right to activate it.
3. Move the ( ) button up/down to change the settings of the selected
function.
4. To exit and save the OSD menu, press the button or move the
( ) button left repeatedly until the OSD menu disappears. To adjust other
functions, repeat steps 1-3.