ROG SWIFT OLED PG42UQ UŽIVATELSKÁ PŘÍRUČKA
První vydání Březen 2022 Copyright © 2022 ASUSTeK COMPUTER INC. Všechna práva vyhrazena. Žádná část této příručky, včetně výrobků a softwaru v příručce popsaných, nesmí být bez písemného souhlasu firmy. ASUSTeK COMPUTER INC. („ASUS“) reprodukována, přenesena, přepsána, uložena v systému pro ukládání dat, ani přeložena do žádného jazyka v žádné podobě a žádným způsobem, kromě dokumentace uložené kupujícím pro účel zálohování.
Obsah Upozornění................................................................................................... iv Bezpečnostní informace.............................................................................. v Péče a údržba................................................................................................ x 1.1 Vítejte............................................................................................. 1-1 1.2 Obsah balení..................................................
Upozornění Prohlášení pro Federální komunikační komisi Toto zařízení vyhovuje části 15 předpisů FCC. Provoz vyžaduje splnění následujících dvou podmínek: • Toto zařízení nesmí způsobovat škodlivé rušení. • Toto zařízení musí přijmout veškeré přijaté rušení, včetně rušení, které by mohlo způsobit nežádoucí činnost. Toto zařízení bylo testováno a bylo shledáno, že vyhovuje omezením pro digitální zařízení třídy B, dle části 15 pravidel Federální komunikační komise (FCC).
Toto digitální zařízení třídy B vyhovuje kanadské normě ICES-003. Toto digitální zařízení třídy B splňuje všechny požadavky kanadských předpisů pro zařízení způsobují rušení. Cet appareil numérique de la classe B respecte toutes les exigences du Réglement sur le matériel brouiller du Canada. Toto označení nebo prohlášení musí obsahovat následující nebo podobný text: UPOZORNĚNÍ PŘI VÝMĚNĚ BATERIE ZA NESPRÁVNÝ TYP NEBEZPEČÍ VÝBUCHU.
• Použijte vhodnou koncovku kabelu pro vaši zásuvku elektrorozvodné sítě. • Nepřetěžujte napájecí panely a prodlužovací kabely. Přetížení může vést k požáru nebo k zásahu elektrickým proudem. • Vyhýbejte se extrémně prašnému prostředí, změnám teploty a vlhkosti. Monitor neumisťuje do prostor, kde hrozí navlhnutí/postříkání. Monitor umístěte na stabilní povrch. • Za bouřky nebo pokud nebude dlouho používán, odpojte produkt od elektrorozvodné sítě.
VŽDY používejte nábytek, který dokáže výrobek udržet. VŽDY zajistěte, aby výrobek nepřesahoval nábytek, na kterém je umístěn. VŽDY poučte děti o nebezpečí, které hrozí při lezení na nábytek, když se budou snažit dostat k výrobku nebo jeho ovládacím prvkům. VŽDY veďte kabely připojené k výrobku tak, aby o ně nikdo neklopýtal, netahal za ně a nechytal je. NIKDY nepokládejte výrobek na nestabilní místo.
Likvidace použitých elektrických a elektronických výrobků pro domácnosti v zemích EU Tento symbol na výrobku nebo na jeho balení označuje, že je zakázáno výrobek likvidovat společně s komunálním odpadem. Použitý elektrický nebo elektronický výrobek jste povinni odevzdat na vyhrazeném sběrném místě k další recyklaci.
Zabraňte přepadnutí Při používání displeje jej upevněte ke zdi šňůrou nebo řetězem, které udrží hmotnost monitoru, aby bylo zabráněno pádu monitoru. 1 Šroub M4 nebo M6 Kabel 2 Kabel nebo řetěz • Provedení displeje se může lišit od ilustrací. • Instalaci musí provést kvalifikovaný odborník. Další informace získáte od dodavatele. • Pro modely s čistou hmotností >= 7 kg. Vyberte vhodný způsob, kterým zabráníte přepadnutí.
Péče a údržba • Před zvednutím nebo přemístěním monitoru je lepší odpojit signálový a napájecí kabel. Při zvedání monitoru dodržujte postupy správného zvedání. Při zvedání nebo přenášení držte monitor za okraje. Nezvedejte monitor za stojan nebo kabel. • Čištění. Vypněte monitor a odpojte napájecí kabel. Povrch monitoru čistěte hadříkem, který nedře a nepouští vlákna. Odolné skvrny lze odstranit hadříkem navlhčeným v jemném čistícím prostředku.
Kde najdete další informace Další informace a aktualizace produktu a softwaru jsou dostupné z níže uvedených zdrojů. 1. Web ASUS Celosvětový web ASUS nabízí aktualizované informace o hardwaru a softwaru ASUS. Viz http://www.asus.com 2. Volitelná dokumentace S produktem může být dodávána volitelná dokumentace, poskytovaná prodejcem. Tyto dokumenty nejsou standardní součástí balení.
1.1 Vítejte Děkujeme, že jste zakoupili OLED herní monitor ASUS®! Nejnovější širokoúhlý OLED monitor firmy ASUS poskytuje čistší, širší a jasnější zobrazení a navíc řadu funkcí zlepšujících váš zážitek z obrazu. Díky bohaté nabídce funkcí si můžete vychutnat pohodlí a krásné zobrazení, kterým se tento monitor vyznačuje! 1.2 Obsah balení Překontrolujte, zda jste obdrželi všechny součásti: OLED monitor Podstavec monitoru Stručná příručka Záruční list Napájecí kabel Kabel Ultra High Speed HDMI 2.
1.3 Připevnění stojánku 1. Sejměte krytku vstupních/výstupních portů ze zadní části monitoru. Poté vyjměte imbusový klíč z krytu. 2. Nasaďte krytku vstupních/výstupních portů. Poté zarovnejte a nainstalujte stojánek do slotu. 3. Pomocí imbusového klíče zajistěte stojánek čtyřmi (4) šrouby M6 x 15 mm. M6 x L14.8 • 1.3.1 Doporučujeme položit na stůl měkkou textilii, aby se monitor nepoškodil. Správa kabelů Pomocí krytky vstupních/výstupních portů můžete organizovat kabely.
1.3.2 Dálkový ovladač 1 3 1. 2. 3. 2 4 6 5 7 8 9 Tlačítko Napájení: Slouží k zapnutí/vypnutí monitoru. Tlačítko vstupu: Slouží pro přepínání zdroje vstupu. Potvrzovací tlačítko: Slouží k potvrzení výběru. 4. Navigační tlačítka: Slouží ke zvýšení/snížení hodnot nebo k přemístění výběru nahoru/dolů/doleva/doprava. 5. Tlačítko Ztlumení: Slouží k dočasnému vypnutí zvuku. 6. Tlačítko Zástupce 1: Ve výchozím nastavení je to tlačítko zástupce GamePlus.
Pokyny pro výměnu baterií: Otevřete kryt baterií a vložte baterie do přihrádky pro baterie. Poté nasaďte kryt přihrádky zpět.
1.4 Připojení kabelů 1.4.1 Zadní strana LCD monitoru 12 1 2 3 11 4 5 6 7 8 9 10 1. S/PDIF (optický digitální audio výstup) 2. Port HDMI 2.0 3. Port HDMI 2.0 4. Port HDMI 2.1 5. Port HDMI 2.1 6. DisplayPort 7. Port USB3.2 Gen 1 pro odesílání dat 8. Port USB3.2 Gen 1 pro přijímání dat 9. Konektor sluchátek 10. Port USB3.2 Gen 1 pro přijímání dat 11. Zámek Kensington 12. Port USB3.
1.5 Představení monitoru 1.5.1 Pohled zepředu/ze strany Nastavte monitor pomocí ovládacího tlačítka na spodní části monitoru. DisplayPort 3840x2160 120Hz Racing Mode ROG Swift PG42UQ HDR OFF Gaming Overclocking Image Adaptive-Sync Color GamePlus Input Select GameVisual PIP/PBP Setup Shadow Boost MyFavorite System Setup 5 MOVE/ENTER BACK 0 EXIT 10 ≥5S 1. Indikátor napájení: Význam barev kontrolky napájení je v následující tabulce. 2.
2.1 Nastavení monitoru • V zájmu optimálního pozorování doporučujeme podívat se tak, abyste viděli celou plochu monitoru, a pak nastavit sklon, který vám nejvíc vyhovuje. • Při nastavování sklonu držte stojan, aby monitor nespadl. • Sklon monitoru můžete nastavit v rozmezí -5˚ až 5˚. -5 ~ 5 Je normální, že se monitor při nastavování úhlu mírně třese.
2.
2.3 Zapnutí monitoru Monitor lze zapnout stisknutím tlačítka tlačítka na monitoru. na dálkovém ovladači nebo Pokud je aktivována funkce Indikátor napájení a je detekován vstupní zdroj, LED indikátor napájení svítí červeně, což znamená, že je monitor zapnutý. Indikátor napájení se v úsporném režimu nesvítí.
3.1 Nabídka OSD (On-Screen Display) 3.1.1 Změna konfigurace K procházení nabídky a provádění úprav můžete použít buď dálkový ovladač nebo ovládací tlačítka na monitoru. DisplayPort 3840x2160 120Hz Režim Závod ROG Swift PG42UQ HDR OFF Hry Přetaktování Obraz Adaptive-Sync Barva GamePlus Výběr vstupu GameVisual Nastavení PIP/PBP Shadow Boost MyFavorite Nastavení systému MOVE/ENTER BACK EXIT Chcete-li procházet nabídku a provádět úpravy pomocí dálkového ovladače, postupujte následovně: 1.
3.1.2 1. Představení funkcí OSD Hry Nakonfigurujte své herní předvolby. DisplayPort 3840x2160 120Hz Režim Závod ROG Swift PG42UQ HDR OFF Hry Přetaktování Obraz Adaptive-Sync Barva GamePlus Výběr vstupu GameVisual Nastavení PIP/PBP Shadow Boost MyFavorite Nastavení systému MOVE/ENTER • Přetaktování: Upravte obnovovací frekvenci. • ZAPNUTO: Tato funkce umožňuje upravit obnovovací kmitočet. • Max. obn.
2. Obraz Nakonfigurujte nastavení obrazu. DisplayPort 3840x2160 120Hz Režim Závod ROG Swift PG42UQ HDR OFF Hry Jas Obraz Jednotný jas Barva Kontrast Výběr vstupu VividPixel 30 80 Nastavení PIP/PBP Nastavení HDR MyFavorite Nastavení poměru stran Nastavení systému Filtr Modrého Světla MOVE/ENTER BACK EXIT • Jas: Slouží k úpravě úrovně jasu. • Jednotný jas: Pokud je tato funkce povolena, systém neupraví maximální jas obrazovky, když je obrazovka zobrazena v jiné velikosti.
Pro uvolnění zatížení zraku dodržujte následující zásady: 3-4 • Během vícehodinového používání displeje musí uživatelé dělat přestávky. Doporučujeme provádět krátké přestávky (alespoň 5 minut) přibližně po každé 1 hodině souvislé práce. Častější kratší přestávky jsou účinnější, než jedna dlouhá. • Aby se minimalizovala zátěž zraku a vysoušení vašich očí, musí uživatelé pravidelně uvolňovat zrak tím, že budou pravidelně zaostřovat na vzdálené objekty.
3. Barva Tato funkce umožňuje nastavit barvu obrazu. DisplayPort 3840x2160 120Hz Režim Závod ROG Swift PG42UQ HDR OFF Hry Zobrazit Barev. Prostor Obraz Teplota barev Barva Sytost Výběr vstupu Šestiosá sytost Nastavení PIP/PBP Gamma MyFavorite Nastavení systému MOVE/ENTER BACK EXIT • Zobrazit Barev. Prostor: Vyberte barevný prostor na sRGB a DCI-P3. • Teplota barev: Obsahuje sedm přednastavených barevných režimů (4000K, 5000K, 6500K, 7500K, 8200K, 9300K, 10000K) a Uživatelský režim.
4. Výběr vstupu Vyberte požadovaný vstupní zdroj a přepínejte mezi zapnutím a vypnutím funkce Automatická detekce vstupu. Když je deaktivována funkce Automatická detekce vstupu, zdroj vstupu monitoru se automaticky nepřepne. DisplayPort 3840x2160 120Hz Režim Závod ROG Swift PG42UQ HDR OFF Automatická detekce vstupu Hry Obraz DisplayPort Barva HDMI-1(v 2.1) Výběr vstupu HDMI-2(v 2.1) Nastavení PIP/PBP HDMI-3(v 2.0) MyFavorite HDMI-4(v 2.0) Nastavení systému BACK MOVE/ENTER 5.
6. MyFavorite Přiřaďte funkci tlačítku zástupce, uložte aktuální konfiguraci systému nebo obnovte konfiguraci systému. DisplayPort 3840x2160 120Hz Režim Závod ROG Swift PG42UQ HDR OFF Hry Zástupce Obraz Vlastní Nastavení Barva Výběr vstupu Nastavení PIP/PBP MyFavorite Nastavení systému MOVE/ENTER BACK EXIT • Zástupce: Slouží k výběru funkce pro tlačítko zástupce. • Vlastní Nastavení: Načte/uloží všechna nastavení monitoru.
7. Nastavení systému Slouží k úpravám nastavení konfigurace systému.
• Indikátor napájení: slouží k zapnutí/vypnutí indikátoru napájení • Zámek vypínače: slouží k vypnutí/zapnutí vypínače. • Zámek kláves: Povolením této funkce deaktivujete všechny funkční klávesy. Stisknutím a podržením tlačítka Navigace déle než pět sekund zrušíte funkci zámku kláves. Nastavení Napájení: Vyberte režim nastavení napájení. Pokud je tato položka nastavena na Standardní režim, může to způsobit zvýšenou spotřebu energie.
3-10 • Datový tok DisplayPort: Vyberte DisplayPort 1.2 nebo DisplayPort 1.4 podle verze DP grafické karty. • DSC: Povolí/zakáže funkci DSC (Display Stream Compression). • HDMI CEC: Aktivuje/deaktivuje funkci HDMI CEC. Pokud je funkce povolena, můžete pomocí dálkového ovládání ovládat zařízení připojená k monitoru prostřednictvím portů HDMI. • Informace: Zobrazení informací o monitoru. • Obnovit vše: Volbou ANO obnovíte nastavení do výchozího továrního režimu.
3.2 Specifikace Typ panelu OLED Velikost panelu Širokoúhlý, 41,5” (106 cm) Max. rozlišení 3840x2160 Rozteč bodů 0,2395 mm x 0,2395 mm Jas 135 nitů (typ.) (APL 100 %) Kontrastní poměr 1 500 000:1(APL 25 %)Typ Pozorovací úhel (H/V) Zobrazované barvy Doba odezvy Výběr barevné teploty Analogový vstup Digitální vstup 178° (V) / 178° (H) 1,07 miliardy 0,1 ms (zelená na zelenou) 8 barevných teplot Ne DisplayPort v1.4 x 1, HDMI v2.0 x 2, HDMI v2.
Hmotnost (odhad) Výběr jazyků Příslušenství 13,58 kg (se stojánkem) 14,77 kg (čistá) 20,07 kg (hrubá) Angličtina, francouzština, němčina, španělština, italština, holandština, ruština, polština, čeština, chorvatština, maďarština, rumunština, portugalština, turečtina, zjednodušená čínština, tradiční čínština, japonština, korejština, perština, thajština, indonéština, ukrajinština Kabel DP, kabel HDMI, kabel USB, napájecí kabel, stručná příručka, záruční list, zkušební protokol o kalibraci barev, nálepka ROG
3.3 Řešení potíží (FAQ) Problém Možné řešení LED kontrolka napájení nesvítí • Stisknutím tlačítka ověřte, zda je monitor zapnutý. • Zkontrolujte, zda je dobře zapojen napájecí kabel mezi monitor a zásuvku elektrické sítě. • Zkontrolujte funkci indikátoru napájení v hlavní nabídce OSD. Výběrem „ZAPNUTO“ zapnete indikátor LED napájení. Kontrolka napájení • Ověřte, zda je monitor a počítač zapnutý.
3.4 3-14 Seznam podporovaných frekvencí HDMI2.0 DP1.4 HDMI2.1 HDMI2.1(21:9) 720x400/70Hz 720x400/70Hz 720x400/70Hz 720x400/70Hz DP1.
2560x1440/120Hz 3840x1600/120Hz 3440x1440/100Hz 3440x1440/100Hz 3440x1440/100Hz 3440x1440/120Hz 3440x1440/60Hz 3840x1080/120Hz 3840x1080/120Hz 3840x1080/120Hz 3840x1080/120Hz 2560x1440/120Hz 3840x2160/138Hz (přetaktování) 1920x2160/60Hz 3440x1440/60Hz 2560x1440/120Hz 3440x1440/60Hz 1920x2160/60Hz 3840x1600/120Hz 3440x1440/120Hz 3840x1080/120Hz 3840x2160/138Hz (přetaktování) * Režimy neuvedené výše v tabulce nemusí být podporovány.