Prima ediție Aprilie 2022 Copyright © 2022 ASUSTeK COMPUTER INC. Toate drepturile rezervate. Nicio parte din acest manual, inclusiv produsele și software-ul descrise în acesta nu poate fi reprodusă, transmisă, transcrisă, păstrată într-un sistem de preluare a informațiilor sau tradusă în orice limbă, indiferent de formă sau de mijloace, cu excepția documentației păstrate de cumpărător cu scopul de copie de rezervă, fără a avea permisiunea scrisă explicită a ASUSTeK COMPUTER INC. („ASUS”).
Cuprins Note............................................................................................................... iv Informații referitoare la siguranță.............................................................. vi Îngrijire și curățare..................................................................................... vii Servicii de preluare a produselor vechi în magazin............................... viii Capitolul 1: Prezentarea produsului 1.1 Bine ați venit!..............................
Note Declarația Comisiei federale de comunicații Acest dispozitiv respectă Secțiunea 15 a Regulilor FCC. Funcționarea trebuie să îndeplinească următoarele două condiții: • • Acest dispozitiv nu poate cauza interferențe nocive și Acest dispozitiv trebuie să accepte orice interferențe primite, inclusiv interferențele care pot provoca o funcționare nedorită.
Informații referitoare la siguranță • Înainte de configurarea monitorului, citiți cu atenție toată documentația care însoțește produsul. • Pentru a preveni pericolul de incendiu sau de electrocutare, nu expuneți monitorul la ploaie sau umiditate. • Nu încercați să deschideți carcasa monitorului. Tensiunile înalte periculoase din monitor pot provoca vătămarea corporală gravă. • Dacă sursa de alimentare s-a stricat, nu încercați să o reparați singuri.
Acest simbol al pubelei pe roți barate cu două linii în formă de X indică faptul că produsul (echipament electric, electronic și baterie tip pastilă ce conține mercur) nu trebuie eliminat ca deșeu municipal. Verificați reglementările locale privind eliminarea produselor electronice. AEEE yönetmeliğine uygundur Îngrijire și curățare • Înainte să ridicați sau să mutați monitorul, este bine să deconectați cablurile și cablul de alimentare. Respectați tehnicile de ridicare corecte când poziționați monitorul.
Convenții utilizate în acest ghid AVERTIZARE: Informații pentru a preveni vătămarea corporală când încercați să efectuați o acțiune. ATENȚIE: Informații pentru a preveni deteriorarea componentelor când încercați să efectuați o acțiune. IMPORTANT: Informații pe care TREBUIE să le respectați pentru a efectua o acțiune. NOTĂ: Sfaturi și informații suplimentare pentru a ajuta la efectuarea unei acțiuni.
Capitolul 1: Prezentarea produsului 1.1 Bine ați venit! Vă mulțumim pentru achiziționarea monitorului LCD ASUS®! Cel mai nou monitor LCD cu ecran panoramic de la ASUS oferă un afișaj cu contrast mai mare, mai lat și mai luminos, plus o mulțime de caracteristici care îmbunătățesc experiența de vizualizare. Cu aceste funcții vă puteți bucura de convenabilitate și de o experiență vizuală incredibilă oferite de monitor! 1.
1.3 Prezentarea monitorului 1.3.1 Vedere din față 1 3 Buton Închidere: 1. • Ieșiți din meniul OSD. • Activați meniul OSD atunci când monitorul intră în modul de repaus sau când afișează mesajul „FĂRĂ SEMNAL”. Butoane de control: 2. 3. 2 • Activați meniul OSD. Activați elementul de meniu OSD selectat. • Creșteți/reduceți valorile sau deplasați selecția în sus/în jos/la stânga/la dreapta. Buton de alimentare: Porniți/opriți monitorul.
1.3.2 Vedere din spate 1 2 1 3 HDMI-4 4 HDMI-3 9 HDMI-2 HDMI-1 4 1-3 5 6 7 8 1. Porturi în aval USB 3.0: Aceste porturi se utilizează pentru conexiunea cu dispozitive USB, cum ar fi tastatură/mouse USB, unitate flash USB etc. 2. Port în aval USB 3.0: Acest port este destinat conectării cu o unitate flash USB pentru actualizarea firmware-ului. 3. Port în amonte 3.0: Acest port se utilizează pentru conexiunea cu un cablu în amonte USB. Conexiunea activează porturile USB de pe monitor. 4.
1.3.3 Telecomanda 1 2 3 1. 2. 4 5 6 7 8 9 Buton de alimentare: Porniți/opriți monitorul. Buton Intrare: Comutați sursa de intrare. 3. Buton Introducere: Confirmați selecția. 4. Butoane Navigare: Creșteți/reduceți valorile sau deplasați selecția în sus/în jos/la stânga/la dreapta. 5. Buton Dezactivare sunet: Dezactivați temporar sunetul. 6. Buton Scurtătură 1: În mod implicit, este tasta rapidă GamePlus.
1.3.4 Funcția GamePlus Funcția GamePlus oferă un set de instrumente și creează un mediu de joc mai bun pentru utilizatori în diferite tipuri de jocuri. Suprapunerea folosind funcția Punct ochit cu 6 opțiuni diferite vă permite să alegeți varianta care se potrivește cel mai bine pentru jocul dvs.
Meniul principal GamePlus GamePlus – Contor FPS GamePlus GamePlus – Punct ochit (punctul ochit își va schimba culoarea în funcție de culoarea fundalului) GamePlus GamePlus Țintă Dinamică FPS OPRIT Contor FPS OPRIT Punct ochit (Modul de lucru) FPS Lunetist (Modul de lucru) Temporizator NEXT BACK/EXIT NEXT BACK/EXIT Cronometru NEXT BACK/EXIT GamePlus – Lunetist GamePlus – Temporizator GamePlus GamePlus OPRIT OPRIT 1.2x 1.2x 1.5x 1.5x 2.0x 2.
1.3.5 Funcția GameVisual Funcția GameVisual vă ajută să selectați diverse moduri de imagine în mod convenabil. Pentru a activa funcția GameVisual: 1. Apăsați pe tasta rapidă GameVisual de pe telecomandă. 2. Apăsați pe butonul Navigare de sus/de jos pentru a selecta setarea dorită. 3. • Mod peisaj: Aceasta este cea mai bună alegere pentru afișarea fotografiilor cu peisaje cu tehnologia de îmbunătățire video GameVisualTM.
Capitolul 2: Configurare 2.1 Atașarea suportului 1. Îndepărtați capacul pentru porturile de intrare/ieșire din partea din spate a monitorului. Apoi scoateți cheia imbus din capac. 2. Puneți la loc capacul pentru porturile de intrare/ieșire. Apoi aliniați și instalați suportul în locașul său. 3. Folosind cheia imbus, fixați suportul cu cele patru (4) șuruburi. •• Vă recomandăm să acoperiți suprafața mesei cu o cârpă moale pentru a preveni deteriorarea monitorului.
2.2 Gestionarea cablurilor Puteți organiza cablurile cu ajutorul capacului pentru porturile de intrare/ ieșire. • Aranjarea cablurilor -2 HDMI -1 HDMI HDMI-4 HDMI-3 HDMI- • 2 1 HDMI- Utilizarea capacului pentru porturile de intrare/ieșire: capacul poate fi atașat sau detașat.
2.3 Detașarea suportului (pentru setul de montare pe perete VESA) Suportul detașabil al acestui monitor este proiectat special pentru montarea pe perete VESA. 1. Îndepărtați capacul pentru porturile de intrare/ieșire din partea din spate a monitorului.. Apoi scoateți cheia imbus din capac. 2. Puneți la loc capacul pentru porturile de intrare/ieșire. 3. Folosind cheia imbus, scoateți cele patru (4) șuruburi care fixează suportul. 4. Detașați suportul de pe monitor.
2.4 Conectarea cablurilor Conectați cablurile respectând următoarele instrucțiuni: HDMI-4 HDMI-3 HDMI-2 • HDMI-1 Pentru a conecta cablul de alimentare: a. Conectați adaptorul de alimentare la portul DC IN (Intrare c.c.) al monitorului. b. Conectați un capăt al cablului de alimentare la adaptorul de alimentare, iar celălalt capăt la o priză electrică. • Pentru a conecta cablul DisplayPort/HDMI: a. Conectați un capăt al cablului DisplayPort/HDMI la portul DisplayPort/HDMI al monitorului. b.
• Pentru a utiliza porturile USB 3.0: Conectați capătul mai mic (tip B) al cablului USB 3.0 în amonte furnizat la portul USB în amonte al monitorului, iar capătul mai mare (tip A) la portul USB 3.0 al computerului. Asigurați-vă că aveți instalat pe computer cel mai recent sistem de operare Windows 10/ Windows 11. Acest lucru va permite funcționarea porturilor USB de pe monitor. • Pentru a utiliza portul USB 3.0 pentru upgrade de firmware: Salvați noul firmware pe unitatea de disc.
Capitolul 3: Instrucțiuni generale 3.1 Meniul OSD (afișare pe ecran) 3.1.1 Cum se reconfigurează Pentru a naviga în meniu și a efectua ajustări, utilizați fie telecomanda, fie butoanele de control de pe monitor. HDMI-1 3840x2160@ 60Hz Mod curse ROG Swift PG48UQ HDR OPRIT Jocuri Overclocking Imagine Rată Reîmpr. Var.
3.1.2 1. Introducere funcție OSD Jocuri Configurați preferințele de joc HDMI-1 3840x2160@ 60Hz Mod curse ROG Swift PG48UQ HDR OPRIT Jocuri Overclocking Imagine Rată Reîmpr. Var. Culoare GamePlus Selectare introducere GameVisual Configurare PIP/PBP Shadow Boost MyFavorite Configurare sistem MOVE/ENTER • BACK EXIT Overclocking: Ajustați rata de reîmprospătare. • PORNIT: Această funcție vă permite modificarea ratei de reîmprospătare. • Rată max.
2. Imagine Configurați setările de imagine. HDMI-1 3840x2160@ 60Hz Mod curse ROG Swift PG48UQ HDR OPRIT Jocuri Strălucire Imagine Luminozitate uniformă Culoare Contrast Selectare introducere VividPixel Configurare PIP/PBP Setare HDR MyFavorite Control aspect Configurare sistem Filtru Lumină Albastră MOVE/ENTER 90 80 BACK EXIT • Strălucire: Ajustați nivelul de strălucire.
Consultați următoarele pentru a atenua solicitarea ochilor: • • • • 3. Utilizatorii trebuie să facă pauze dacă lucrează multe ore la monitor. Vă recomandăm să faceți pauze scurte (cel puțin 5 minute) după aproximativ 1 oră de lucru continuu la computer. Pauzele scurte și frecvente sunt mai eficiente, decât o singură pauză mai lungă. Pentru a reduce la minimum solicitarea și senzația de uscare a ochilor, utilizatorii trebuie să-și odihnească ochii periodic, concentrându-se pe obiecte aflate la depărtare.
4. Selectare introducere Selectați sursa de intrare dorită și comutați funcția Detectarea automată a intrării între Activat și Dezactivat. Sursa de intrare a monitorului nu se va comuta automat atunci când funcția Detectarea automată a intrării este dezactivată. HDMI-1 3840x2160@ 60Hz Mod curse ROG Swift PG48UQ HDR OPRIT Jocuri Detectarea automată a intrării Imagine DisplayPort Culoare HDMI-1(v2.1) Selectare introducere HDMI-2(v2.1) Configurare PIP/PBP HDMI-3(v2.0) MyFavorite HDMI-4(v2.
6. MyFavorite Atribuiți o funcție butonului de comandă rapidă, salvați configurațiile curente ale sistemului sau restaurați configurația sistemului. HDMI-1 3840x2160@ 60Hz Mod curse ROG Swift PG48UQ HDR OPRIT Jocuri Scurtătură Imagine Setare Personaliz. Culoare Selectare introducere Configurare PIP/PBP MyFavorite Configurare sistem BACK MOVE/ENTER 7. EXIT • Scurtătură: Atribuiți o funcție pentru butonul de comandă rapidă desemnat. • Setare Personaliz.
• Ieșire sunet: Setați setările de ieșire a sunetului pe difuzor, ieșire de linie sau căști. • AudioWizard: Selectați modul de sunet . • USB Hub: Setează disponibilitatea hub-ului USB în standby. • Indicator alimentare: Activați/Dezactivați indicatorul LED de alimentare. • Bloc. cu tasta de alim.: Dezactivați/Activați tasta de alimentare. • Blocare taste: Activați această funcție pentru a dezactiva toate tastele pentru funcții.
• Curățare Pixel: Se calibrează orice probleme care pot apărea pe ecran atunci când monitorul a fost pornit pentru o perioadă lungă de timp. Procesul va dura aproximativ 6 minute. Această funcție se va activa automat atunci când monitorul este oprit. Nu scoateți cablul de alimentare din priză în timp ce procesul este în desfășurare. Dacă porniți monitorul, funcția Curățare Pixel nu va mai funcționa.
3.2 Specificații Tip panou OLED Dimensiune panou Ecran lat de 47,53” (16:9, 120,7 cm) Rezoluție maximă 3840 x 2160 Dimensiune pixel 0,274 mm x 0,274 mm Luminozitate 3-9 135 niți (Normal) (Model Full-White) 900 niți (HDR 3%) Raport de contrast 1500000:1 Unghi de vizualizare (H/V) 178˚/178˚ Culori afișare 1,07 miliarde de culori Timp de răspuns 0,1 ms Selecție temperaturi de culoare 8 temperaturi de culoare Intrare analogică Nu Intrare digitală DisplayPort v1.4 x 1, HDMI v2.
Greutate (aprox.
Dimensiuni externe 101 265,8 109,4 3.
3.4 Depanare (întrebări frecvente) Problemă LED-ul de alimentare nu este PORNIT Soluție posibilă • Apăsați pe butonul pentru a verifica dacă monitorul este pornit. • Verificați dacă adaptorul și cordonul de alimentare sunt conectate corect la monitor și la priză. • Verificați funcția Indicator alimentare din meniul OSD. Selectați „PORNIT” pentru a porni LED-ul de alimentare. LED-ul de alimentare este de • Verificați dacă monitorul și computerul sunt pornite.
3.5 Listă de frecvențe acceptate HDMI 2.1 - HDMI1/2 HDMI 2.