PG279 series LCD Monitor User Guide
First Edition September 2015 Copyright © 2015 ASUSTeK COMPUTER INC. All Rights Reserved. No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except documentation kept by the purchaser for backup purposes, without the express written permission of ASUSTeK COMPUTER INC. (“ASUS”).
Contents Notices.......................................................................................................... iv Safety information........................................................................................ v Care & Cleaning........................................................................................... vi Takeback Services...................................................................................... vii Chapter 1: Product introduction 1.1 Welcome! .......
Notices Federal Communications Commission Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: • This device may not cause harmful interference, and • This device must accept any interference received including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
Safety information • Before setting up the monitor, carefully read all the documentation that came with the package. • To prevent fire or shock hazard, never expose the monitor to rain or moisture. • Never try to open the monitor cabinet. The dangerous high voltages inside the monitor may result in serious physical injury. • If the power supply is broken, do not try to fix it by yourself. Contact a qualified service technician or your retailer.
AEEE yönetmeliğine uygundur Care & Cleaning • Before you lift or reposition your monitor, it is better to disconnect the cables and power cord. Follow the correct lifting techniques when positioning the monitor. When lifting or carrying the monitor, grasp the edges of the monitor. Do not lift the display by the stand or the cord. • Cleaning. Turn your monitor off and unplug the power cord. Clean the monitor surface with a lint-free, non-abrasive cloth.
Where to find more information Refer to the following sources for additional information and for product and software updates. 1. ASUS websites The ASUS websites worldwide provide updated information on ASUS hardware and software products. Refer to http://www.asus.com 2. Optional documentation Your product package may include optional documentation that may have been added by your dealer. These documents are not part of the standard package.
viii
1.1 Welcome! Thank you for purchasing the ASUS® LCD monitor! The latest widescreen LCD monitor from ASUS provides a broader, brighter and crystal-clear display, plus a host of features that enhance your viewing experience. With these features, you can enjoy the convenience and delightful visual experience that the monitor brings to you! 1.
1.3 Monitor introduction 1.3.1 Front view 1 2 3 4 5 1. ( 5-way) button: • Turns on the OSD menu. Enacts the selected OSD menu item. • Increases/Decreases values or moves your selection up/down/left/right. • Turns on the OSD menu when the monitor enters standby mode or displays the “NO SIGNAL“ message. 2. button • Exits the OSD menu item. • Turns on the OSD menu when the monitor enters standby mode or displays the “NO SIGNAL“ message. 3.
5. Power button/power indicator • Turns the monitor on/off. • The color definition of the power indicator is as the below table. 1.3.2 Status Description White Amber OFF Red Yellow ON Standby mode/No signal OFF G-SYNC ULMB Back view 9 4 5 6 7 8 Rear connectors 1. 2. DC-IN port. This port connects the power cord. Earphone jack. This port is only available when an HDMI/DisplayPort cable is connected. 3. DisplayPort. This port is for connection for a DisplayPort compatible device. 4.
1.3.3 GamePlus Function The GamePlus function provides a toolkit and creates a better gaming environment for users when playing different types of games. In addition, Crosshair function is specially designed for new gamers or beginners interested in First Person Shooter (FPS) games. To active GamePlus: 1. Press the GamePlus hotkey. 2. Move the 3.
1.3.4 TURBO Function (only for DisplayPort input) The TURBO function helps you select among different refresh rates in a convenient way. To active TURBO: Press the TURBO hotkey repeatedly to select. or TURBO TURBO 60 Hz TURBO 120 Hz TURBO 144 Hz 150 Hz or TURBO 155 Hz or TURBO 160 Hz or TURBO 165 Hz TURBO hotkey is only supported by NVIDIA Game Ready Drivers version 391.35 or below.
1-6 Chapter 1: Product introduction
2.1 Adjusting the monitor • For optimal viewing, we recommend that you look at the full face of the monitor, then adjust the monitor to the angle that is most comfortable for you. • Hold the stand to prevent the monitor from falling when you change its angle. • The recommended adjusting angle is +20˚ to -5˚ (for tilt)/+60˚ to -60˚ (for swiveling/ +120 mm (for height adjustment)/90˚ (for portrait view).
2.2 Detaching the arm (for VESA wall mount) The detachable arm of this monitor is specially designed for VESA wall mount. To detach the arm: 1. Have the front of the monitor face down on a table. 2. Loosen the four screws on the back of the monitor and remove the arm/base. 1 2 We recommend that you cover the table surface with soft cloth to prevent damage to the monitor. 2.3 Connecting the cables Connect the cables as the following instructions: • To connect the power cord: a.
b. • Connect one end of the power cord to the power adapter and the other end to a power outlet. To connect the DisplayPort/HDMI cable: a. Plug one end of the DisplayPort/HDMI cable to the monitor’s DisplayPort/HDMI port. b. Connect the other end of the DisplayPort/HDMI cable to your computer's DisplayPort/HDMI port. • To use the earphone: connect the end with plug type to the monitor’s earphone jack when an HDMI or DisplayPort signal is fed. • To use the USB 3.0 ports: Take the supplied USB 3.
2-4 Chapter 2: Setup
3.1 OSD (On-Screen Display) menu 3.1.1 How to reconfigure Normal Mode DisplayPort 2560 x 1440@ 60Hz Racing Mode ASUS ROG PG279 Over Clocking On GameVisual Max Refresh Rate Blue Light Filter Color Image Input Select System Setup BACK MOVE/ENTER 1. Press the 2. ( ) button up/down to navigate through the functions. Move the ( ) button to activate it.
• Max Refresh Rate: After activating this function, you can select one refresh rate to be displayed along with 60 Hz and 120 Hz when pressing the TURBO hotkey (Only for DisplayPort input). After reboot, test the new Max Refresh Rate by enabling it in the NVIDIA Control Panel. If you don’t see an image, disconnect the DP cable and use the monitor OSD to try again with a safer Max Refresh Rate. 2. GameVisual This function contains 6 sub-functions you can select for your preference.
Normal Mode DisplayPort 2560 x 1440@ 60Hz Racing Mode ASUS ROG PG279 Over Clocking Level o GameVisual Level 1 Blue Light Filter Level 2 Color Level 3 Image Level 4 Input Select System Setup BACK MOVE/ENTER EXIT • Level 0: No change. • Level 1~4: The higher the level, the less blue light is scattered. When Blue Light Filter is activated,the default settings of Racing Mode will be automatically imported. Between Level 1 to Level 3, the Brightness function is user-configurable.
• Brightness: The adjusting range is from 0 to 100. • Contrast: The adjusting range is from 0 to 100. • Saturation: The adjusting range is from 0 to 100. • Color Temp.: Contains 4 modes including Cool, Normal, Warm, and User Mode. 5. Image You can adjust OD and ULMB from this menu. Normal Mode DisplayPort 2560 x 1440@ 60Hz Racing Mode ASUS ROG PG279 Over Clocking OD GameVisual ULMB Blue Light Filter Color Image Input Select System Setup BACK MOVE/ENTER 6.
7. System Setup Allows you to adjust the system.
3.2 Specifications summary PG279Q/PG279QZ Panel Type Panel size Max. Resolution Pixel pitch Brightness (Typ.) Contrast Ratio (Typ.) Viewing angle(H/V) CR>10 Display colors Response time Color temperature selection Analog input Digital input Earphone jack Audio input Speaker (Built-in) USB 3.0 port Colors Power LED Tilt Swivel Height adjustment VESA wall mount Kensington lock Voltage rating Temperature (Operating) TFT LCD 27”W (16:9, 68.47 cm) wide screen 2560 x 1440 0.
Accessories Compliance and Standards DP cable, HDMI cable (for PG279Q only), USB cable, power adapter, power cord, Driver and Manual disc, Quick start guide, warranty card CB, CE, CU, CCC, UL/cUL, FCC, RCM, BSMI, VCCI, RoHS, WEEE, J-MOSS, ErP, PSE, CEL Level 1, Windows 7 WHQL, Windows 8.1 WHQL, Windows 10 WHQL, KCC, E-Standby *Specifications are subject to change without notice. 3.
3.4 Supported operating mode HDMI input Resolution Frequency Refresh Rate 640 x 480 60Hz 720 x 480 60Hz 720 x 576 50Hz 800 x 600 60Hz 1024 x 768 60Hz 1280 x 720 50Hz 1280 x 720 60Hz 1920 x 1080 50Hz 1920 x 1080 60Hz 2560 x 1440 60Hz Note: Do not support interlace.
DisplayPort input--Over clocking Resolution Frequency Refresh Rate 2560 x 1440 144Hz 2560 x 1440 150Hz 2560 x 1440 155Hz 2560 x 1440 160Hz 2560 x 1440 165Hz Note: Do not support interlace. Over Clocking supported GPUs: NVIDIA Maxwell GPU Graphics Card like GTX745, GTX750, GTX750 Ti, GTX 960, GTX970, GTX980, GTX980 Ti and GTX Titan X. For other GPUs, please contact the manufactures to see if they are compatible.
