Première édition V1 Juillet 2019 Copyright © 2019 ASUSTeK COMPUTER INC. Tous droits réservés. Aucune partie de cette publication, y compris les produits et logiciels y étant décrits, ne peut être reproduite, transmise, transcrite, stockée dans un système d’interrogation ou traduite dans une langue quelconque sous quelque forme et par quelque moyen que ce soit, exception faite de la documentation conservée par l’acheteur à des fins de sauvegarde, sans l’autorisation écrite expresse de ASUSTeK COMPUTER INC.
Table des matières Avertissements.................................................................................iv Informations de sécurité...................................................................v Soin & Nettoyage...............................................................................vi Takeback Services...........................................................................vii Chapitre 1 : Présentation du produit 1.1 Bienvenu !.......................................................
Avertissements Déclaration de la Commission Fédérale des Télécommunications (FCC) Cet appareil est conforme à la section 15 du règlement de la FCC. Son fonctionnement est sujet aux deux conditions suivantes : • Cet appareil ne doit pas causer d’interférences nuisibles, et • Cet appareil doit être capable d’accepter toutes les interférences, y compris les interférences pouvant provoquer un fonctionnement indésirable.
Informations de sécurité •• Avant d’installer le moniteur, lisez attentivement toute la documentation qui accompagne la boîte. •• Pour éviter tout incendie ou électrocution, n'exposez jamais le moniteur à la pluie ni à l'humidité. •• N’essayez jamais d’ouvrir le boîtier du moniteur. Les hautes tensions dangereuses à l’intérieur du moniteur peuvent entraîner de graves blessures corporelles. •• Si l'alimentation électrique est cassée, n'essayez pas de la réparer par vous-même.
•• L’adaptateur est utilisé seulement pour ce moniteur, ne l’utilisez pas à d’autres fins. Votre appareil utilise l’une des alimentations suivantes : - Fabricant : Delta Electronics Inc., Modèle : ADP-90YD B  Ce symbole de poubelle sur roulettes indique que le produit (appareil électrique, électronique ou batterie cellule contenant du mercure) ne doit pas être jeté dans une décharge municipale.
Conventions utilisées dans ce guide ATTENTION : Informations pour éviter de vous blesser en essayant de terminer un travail. AVERTISSEMENT : Informations pour éviter d’endommager les composants en essayant de terminer un travail. IMPORTANT : Informations que vous DEVEZ suivre pour terminer une tâche. REMARQUE : Astuces et informations supplémentaires pour aider à terminer un tâche.
viii
1.1 Bienvenu ! Merci d'avoir acheté un moniteur LCD d'ASUS® ! Le dernier moniteur à écran LCD large d’ASUS offre un affichage plus large, plus lumineux et d’une clarté cristalline, en plus de toute une gamme de fonctions qui améliorent votre séance de visionnage. Avec ces fonctions du moniteur, vous pouvez profiter du confort et vous régaler d’une expérience visuelle ! 1.
1.3 Présentation du moniteur 1.3.1 Vue de devant 1 2 3 4 5 1. 2. 3. 4. Bouton 5 directions) : • Active le menu OSD. Active l’élément du menu OSD sélectionné. • Augmente/diminue les valeurs ou déplace votre sélection en haut/ bas, à gauche/droite. • Active le menu OSD quand le moniteur entre en mode veille ou affiche le message « PAS DE SIGNAL ». Bouton • Quitte l’élément du menu OSD. • Active le menu OSD quand le moniteur entre en mode veille ou affiche le message « PAS DE SIGNAL ».
• 5. Active le menu OSD quand le moniteur entre en mode veille ou affiche le message « PAS DE SIGNAL ». Bouton d’alimentation/voyant d’alimentation • Pour allumer ou éteindre le moniteur. • Les couleurs du témoin d'alimentation sont indiquées dans le tableau ci-dessous. 1.3.2 État Description Blanc MARCHE Orange clignotant Orange ETEINT Rouge Jaune Entre en mode veille Mode Veille/Aucun signal ETEINT G-SYNC ULMB Vue de derrière 4 9 5 6 7 8 1. Port DC-IN.
1.3.3 Fonction GamePlus La fonction GamePlus fournit une boîte à outils et crée un meilleur environnement de jeu pour les utilisateurs pendant différents types de jeux. La superposition du réticule avec 6 options de réticules différents vous permet de choisir celui qui convient le mieux pour le jeu auquel vous jouez. Il y a aussi une minuterie à l’écran que vous pouvez positionner sur la gauche de l’écran afin de pouvoir garder une trace du temps de jeu écoulé.
GamePlus — Minuterie GamePlus — Compteur de FPS GamePlus GamePlus FPS NEXT 1.3.4 BACK/EXIT NEXT BACK/EXIT Fonction GameVisual La fonction GameVisual vous aide à sélectionner facilement les différents modes d'affichage. Pour activer GameVisual : Faites votre sélection en appuyant plusieurs fois sur le raccourci GameVisual. • Mode Paysage : Ceci est le meilleur choix pour l’affichage de photos de paysage avec la technologie d’amélioration vidéo de GameVisualTM.
1-6 • En Mode course, la fonction suivante n’est pas configurable par l’utilisateur : Saturation. • En Mode sRGB, les fonctions suivantes ne sont pas configurables par l’utilisateur : Saturation, Température Couleur, Luminosité, Contraste, Gamma. • Dans les mode Paysage et Cinéma, les fonctions suivantes ne sont pas configurables par l’utilisateur : Gamma, Optimisation des noirs.
2.1 Assemblage de la base/du bras du moniteur Pour assembler la base du moniteur : 1. Posez le moniteur orienté vers le bas sur une table. 2. Fixez la base dans le bras, en vous assurant que la patte du bras s’adapte dans la rainure de la base. 3. Fixez la base au bras en serrant la vis fournie. Nous vous conseillons de couvrir la surface de la table avec un chiffon doux pour éviter d’endommager le moniteur. 2.
Il est normal que le moniteur tremble légèrement quand vous ajustez l’angle de vision. Pivoter le moniteur 1. Soulevez le moniteur dans sa position la plus haute. 2. Inclinez le moniteur à l’angle maximum permis. 3. Tournez le moniteur à l’angle souhaité. -5°~+33° 0° - 90° 0° 90° Il est normal que le moniteur tremble légèrement quand vous ajustez l’angle de visualisation. 2.
Nous vous conseillons de couvrir la surface de la table avec un chiffon doux pour éviter d’endommager le moniteur. 2.4 • Le kit de montage mural VESA (100 x 100 mm) s'achète séparément. • Utilisez uniquement un support de montage mural agréé UL avec un poids / une charge minimum de 22,7 kg (taille des vis : M4 x 10 mm) Branchement des câbles Branchez les câbles selon les instructions suivantes : • • Pour brancher le cordon d’alimentation : a.
• Pour utiliser les ports USB 3.0 : Prenez le câble USB 3.0 fourni, et branchez la plus petite extrémité (type B) du câble USB en amont au port USB en amont du moniteur, et la plus grande extrémité (type A) au port USB 3.0 de votre ordinateur. Assurez-vous que la dernière version du système d’exploitation Windows 7/Windows 8.1/ Windows 10 est installée sur votre ordinateur. Cela permettra aux ports USB du moniteur de fonctionner. 2.5 Mise sous tension du moniteur Appuyez sur le bouton d’alimentation .
3.1 Menu OSD (Affichage à l’écran) 3.1.1 Reconfiguration Gsync mode DisplayPort 2560 x 1440@ 165Hz Mode course ROG Swift PG279 Over Clocking Taux rafraîch. max 165Hz Filtre de lumière bleue Couleur Image Sélection Entrée Configuration Système BACK MOVE/ENTER 1. Appuyez sur le bouton 2. Déplacez le bouton ( ) en haut/bas pour naviguer dans les fonctions. Mettez la fonction voulue en surbrillance, et appuyez bouton ( ) pour l’activer.
• Taux rafraîch. max : Vous permet de sélectionner un taux de rafraîchissement maximum de 165Hz (seulement pour l’entrée ( ) deux DisplayPort). Après la sélection, appuyez le bouton fois pour activer le réglage. Après le redémarrage, testez le nouveau taux de rafraîchissement maximal en l'activant dans le panneau de configuration NVIDIA. Si vous ne voyez pas d'image, débranchez le câble DP et utilisez l'OSD du moniteur pour réessayer avec un taux de rafraîchissement maximal plus sûr. 2.
3. • Les exercices oculaires peuvent aider à réduire la fatigue oculaire. Répétez ces exercices souvent. Si la fatigue oculaire persiste, veuillez consulter un médecin. Exercices oculaires : (1) Regardez de manière répétée vers le haut et vers le bas, (2) roulez des yeux lentement, (3) faites bouger vos yeux en diagonale. • La lumière bleue à haute énergie peut entraîner une fatigue oculaire et une DMLA (dégénérescence maculaire liée à l’âge). Filtre de lumière bleue pour réduire de 70% (max.
• Contrôle du contraste adaptatif : Ajuste dynamiquement le niveau de contraste du moniteur pour révéler les détails dans chaque partie d’une image en particulier quand le contraste de l’image est faible. Le niveau de force du contrôle du contraste adaptatif est ajustable à Activer, Puissance ou Limite.
• Langue : Vous pouvez choisir parmi les 21 langues suivantes : Anglais, Français, Allemand, Italien, Espagnol, Néerlandais, Portugais, Russe, Tchèque, Croate, Polonais, Roumain, Hongrois, Turc, Chinois simplifié, Chinois traditionnel, Japonais, Coréen, Thaï, Indonésien, Persan. • Position-OSD : Pour ajuster la position horizontale (Position H)/la position verticale (Position V) du menu OSD. • Transparence : Pour ajuster l’arrière-plan du menu OSD, de l’opaque vers le transparent.
3.2 Résumé des spécifications Type d’affichage Taille de l’écran Résolution max. TFT LCD Ecran large 27" (16:9, 68,47 cm) 2560 x 1440 Taille des pixels Luminosité (Typ.) Rapport de contraste (Typ.) Angle de vision (H/V) CR>10 Couleurs d’affichage Temps de réponse Sélection de la température des couleurs Entrée analogique Entrée numérique Prise de l’écouteur Entrée audio Haut-parleur (intégré) Port USB 3.
Conformité et normes CB, CE, CU, CCC, UL/cUL, FCC, RCM, BSMI, VCCI, RoHS, WEEE, J-MOSS, ErP, PSE, CEL Level 1, Windows 7 WHQL, Windows 8.1 WHQL, Windows 10 WHQL, ICES-3, UkrSEPRO, MEPS, PC Recycle, KCC, e-Standby, TUV Flicker Free, TUV Low Blue Light *Spécifications sujettes à modification sans préavis.
3.
3.4 Guide de dépannage (FAQ) Problème Le voyant DEL d'alimentation n’est pas ALLUMÉ Solution possible • Appuyez sur le bouton pour vérifier si le moniteur est en mode ALLUMÉ. • Vérifiez si le cordon d'alimentation est correctement branché sur le moniteur et sur la prise de courant. Le voyant DEL • Vérifiez si le moniteur et l’ordinateur sont en mode ALLUMÉ.
3.5 Modes de fonctionnement pris en charge Entrée HDMI Résolution Fréquence Taux de rafraîchissement 640 x 480 60Hz 720 x 480 60Hz 720 x 576 50Hz 800 x 600 60Hz 1024 x 768 60Hz 1280 x 720 50Hz 1280 x 720 60Hz 1920 x 1080 50Hz 1920 x 1080 60Hz 2560 x 1440 60Hz Remarque : Ne prend pas en charge entrelacé.
Entrée DisplayPort--Surcadençage Résolution Fréquence Taux de rafraîchissement 2560 x 1440 165Hz Remarque : Ne prend pas en charge entrelacé. GPU pris en charge pour le Surcadençage : Carte graphique à GPU NVIDIA Maxwell comme GTX960, GTX970, GTX980, GTX980 Ti et GTX Titan X ou plus. Pour les autres GPU, veuillez contacter le fabriquant pour voir s’ils sont compatibles. Le moniteur prend en charge volontairement la technologie NVIDIA G-SYNC et cible des solutions graphiques NVIDIA.
3-12 Chapitre 3 : Instructions générales