Première édition Avril 2021 Copyright © 2021 ASUSTeK COMPUTER INC. Tous droits réservés. Aucune partie de cette publication, y compris les produits et logiciels y étant décrits, ne peut être reproduite, transmise, transcrite, stockée dans un système d’interrogation ou traduite dans une langue quelconque sous quelque forme et par quelque moyen que ce soit, exception faite de la documentation conservée par l’acheteur à des fins de sauvegarde, sans l’autorisation écrite expresse de ASUSTeK COMPUTER INC.
Table des matières Avertissements............................................................................................ iv Informations de sécurité.............................................................................. v Soin & Nettoyage......................................................................................... vi Takeback Services...................................................................................... vii Informations produit pour le label énergétique de l’UE.......
Avertissements Déclaration de la Commission Fédérale des Télécommunications (FCC) Cet appareil est conforme à la section 15 du règlement de la FCC. Son fonctionnement est sujet aux deux conditions suivantes : • Cet appareil ne doit pas causer d’interférences nuisibles, et • Cet appareil doit être capable d’accepter toutes les interférences, y compris les interférences pouvant provoquer un fonctionnement indésirable.
Cet appareil numérique de la classe B respecte toutes les exigences du Réglement sur le matériel brouiller du Canada. Informations de sécurité • Avant d’installer le moniteur, lisez attentivement toute la documentation qui accompagne la boîte. • Pour éviter tout incendie ou électrocution, n'exposez jamais le moniteur à la pluie ni à l'humidité. • N’essayez jamais d’ouvrir le boîtier du moniteur.
• Si vous rencontrez des problèmes techniques avec le moniteur, contactez un technicien de réparation qualifié ou votre revendeur. • L’ajustement du contrôle de volume ainsi que l’égaliseur à d’autres réglages que la position centrale peut augmenter la tension de sortie du casque ou des écouteurs et donc le niveau de pression acoustique. • L’adaptateur est utilisé seulement pour ce moniteur, ne l’utilisez pas à d’autres fins.
Conventions utilisées dans ce guide ATTENTION : Informations pour éviter de vous blesser en essayant de terminer un travail. AVERTISSEMENT : Informations pour éviter d’endommager les composants en essayant de terminer un travail. IMPORTANT : Informations que vous DEVEZ suivre pour terminer une tâche. REMARQUE : Astuces et informations supplémentaires pour aider à terminer un tâche.
viii
1.1 Bienvenue ! Merci d’avoir acheté le moniteur LCD d’ASUS® ! Le dernier moniteur à écran LCD large d’ASUS offre un affichage plus large, plus lumineux et d’une clarté cristalline, en plus de toute une gamme de fonctions qui améliorent votre séance de visionnage. Avec ces fonctions du moniteur, vous pouvez profiter du confort et vous régaler d’une expérience visuelle ! 1.
1.3 Présentation du moniteur 1.3.1 Vue de devant/latérale 6 1 2 3 4 5 1. Bouton ( 5 directions) • Active le menu OSD. Active l’élément du menu OSD sélectionné. • Augmente/diminue les valeurs ou déplace votre sélection en haut/ bas, à gauche/droite. • Active le menu OSD quand le moniteur entre en mode veille ou affiche le message « PAS DE SIGNAL ». 2. Bouton • Quitte l’élément du menu OSD. • Bascule la fonction Serrure entre activée et désactivée avec un appui long pendant 5 secondes.
4. Bouton • Valeur par défaut : GameVisual. • Pour modifier la fonction du raccourci, allez dans le menu Raccourci > Raccourci 2. • Active le menu OSD quand le moniteur entre en mode veille ou affiche le message « PAS DE SIGNAL ». 5. Bouton d’alimentation/voyant d’alimentation • Pour allumer ou éteindre le moniteur. • Les couleurs du témoin d’alimentation sont indiquées dans le tableau ci-dessous. 6.
7. Port en émission USB 3.0. Ce port est utilisé pour connecter un câble en amont USB. La connexion active les ports USB du moniteur. 8. Port en réception USB 3.0 (port rouge) avec NVIDIA Reflex Latency Analyzer. Ce port est destiné à la connexion de périphériques USB, tels que clavier/souris USB, clé USB, etc. Ce port est spécifiquement destiné à la connexion avec votre souris câblée ou sans fil pour activer NVIDIA Reflex Latency Analyzer. 9. Ports en réception USB 3.0.
Menu principal GamePlus GamePlus — Viseur GamePlus — Minuterie GamePlus GamePlus GamePlus GamePlus — Compteur de FPS GamePlus FPS Viseur (Mode d'entraînement) Minuterie Chronomètre FPS Compteur de FPS Alignement écran NEXT 1.3.4 BACK/EXIT NEXT BACK/EXIT NEXT BACK/EXIT NEXT BACK/EXIT Fonction GameVisual La fonction GameVisual vous aide à sélectionner facilement les différents modes d’affichage. Pour activer GameVisual : 1. Appuyez le bouton de raccourci GameVisual. 2.
1.3.5 • En Mode course, la fonction suivante n’est pas configurable par l’utilisateur : Saturation sur six axes. • En Mode sRGB, les fonctions suivantes ne sont pas configurables par l’utilisateur : Température Couleur, Luminosité, Contraste, Gamma, Saturation sur six axes. • En Mode Paysage/Cinéma, les fonctions suivantes ne sont pas configurables par l’utilisateur : Gamma, Optimisation des noirs. G-SYNC HDR Le moniteur prend en charge le format HDR.
Moniteur LCD Série PG279QM d’ASUS 1-7
1-8 Chapitre 1 : Présentation du produit
2.1 Assemblage de la base/du bras du moniteur 1. Insérez la base dans le bras. 2. Assurez la base au bras en serrant la vis. Nous vous conseillons de couvrir la surface de la table avec un chiffon doux pour éviter d’endommager le moniteur. Taille de vis de la base : M6 x 15 mm. 2.2 Gestion des câbles Vous pouvez organiser les câbles à l’aide du couvercle du port entrée/sortie. • Organiser les câbles • Utiliser couvercle du port entrée/sortie : le couvercle peut être installé ou retiré.
2.3 Réglage du moniteur • Pour une vision optimale, il est recommandé d'avoir une vision de face sur le moniteur, ensuite réglez l'angle du moniteur pour qu'il soit confortable. • Tenez le pied pour empêcher le moniteur de tomber quand vous le changez d’angle. • L’angle d’ajustement recommandé est de +20˚ à -5˚ (pour l’inclinaison)/+25˚ à -25˚ (pour le pivotement)/+100 mm (pour l’ajustement de la hauteur).
2.4 Démontage du bras (montage mural VESA) Le bras détachable de ce moniteur, est spécialement conçu pour une installation murale VESA. Pour démonter le bras : 1. Couchez le moniteur sur une table face vers le bas. 2. Utilisez un tournevis pour retirer les couvercles là où le moniteur et le bras se rejoignent. 3. Desserrez les quatre vis à l’arrière du moniteur et enlevez le bras/la base.
2.5 Branchement des câbles Branchez les câbles selon les instructions suivantes : Pour le service uniquement • • Pour brancher le cordon d’alimentation : a. Connectez l’adaptateur d’alimentation sur l’entrée DC IN du moniteur. b. Connectez une extrémité du cordon d’alimentation à l’adaptateur d’alimentation et l’autre extrémité à une prise électrique. Pour brancher le câble DisplayPort/HDMI : a. Branchez une extrémité du câble DisplayPort/HDMI sur le port DisplayPort/HDMI du moniteur. b.
Moniteur LCD Série PG279QM d’ASUS 2-5
2-6 Chapitre 2 : Installation
3.1 Menu OSD (Affichage à l’écran) 3.1.1 Reconfiguration Mode G-SYNC HDR désactivé DisplayPort ® ® G-SYNC Processor 2560x1440@240 Hz Mode course G-SYNC Processor Analyzer Inactive ROG Swift 240Hz PG279QM NVIDIA Reflex Latency Analyzer Jeux Image Couleur Sélection Entrée Raccourci Effet d'éclairage Configuration Système BACK MOVE/ENTER ( EXIT 1. Appuyez le bouton 2. Déplacez le bouton ( ) en haut/bas pour naviguer dans les fonctions.
3.1.2 1. Présentation des fonctions OSD G-SYNC® Processor Mode G-SYNC HDR désactivé DisplayPort Mode course ® G-SYNC Processor ® G-SYNC Processor 2560x1440@240 Hz Analyzer Inactive ROG Swift 240Hz PG279QM NVIDIA Reflex Latency Analyzer Jeux Image Couleur Sélection Entrée Raccourci Effet d'éclairage Configuration Système MOVE/ENTER • BACK EXIT NVIDIA Reflex Latency Analyzer Vous devez positionner le « Rectangle de surveillance » là où il y a un changement de luminance presque immédiat.
* Monitoring Rectangle Preset : Ajuste l’emplacement préréglé par défaut pour le rectangle de surveillance. * Monitoring Rectangle Location : Ajuste manuellement l’emplacement du rectangle de surveillance à l’aide du bouton ( 5 directions). * Monitoring Rectangle Size : Ajuste manuellement la taille du rectangle de surveillance à l’aide du bouton ( 5 directions). Vous pouvez également télécharger et installer la GeForce Experience pour profiter pleinement de l’analyse de la latence du système.
• GameVisual : Voir 1.3.4 Fonction GameVisual pour des détails. • Optimisation des noirs : L’Optimisation des couleurs sombres ajuste la courbe de gamma du moniteur pour enrichir les tons sombres dans une image rendant les scènes et objets sombres beaucoup plus facile à voir. 3.
Veuillez consulter ce qui suit pour alléger la fatigue oculaire : • 4. • Vous devez vous éloigner pendant un certain temps de l'affichage si vous travaillez pendant de longues heures. Il est conseillé de faire des pauses courtes (au moins 5 minutes) après environ 1 heure de travail continu à l'ordinateur. Faire des pauses courtes et fréquentes est plus efficace qu'une seule pause plus longue.
5. Sélection Entrée Dans cette fonction, vous pouvez sélectionner la source d’entrée désirée et basculer la fonction de commutation auto d’entrée entre activée et désactivée. Mode G-SYNC HDR désactivé DisplayPort Mode course ® G-SYNC Processor ® G-SYNC Processor DisaplyPort Jeux HDMI-1 Image HDMI-2 Couleur HDMI-3 Sélection Entrée Autocommutateur entrée 2560x1440@240 Hz Analyzer Inactive ROG Swift 240Hz PG279QM Raccourci Effet d'éclairage Configuration Système BACK MOVE/ENTER 6.
• Aura Sync : Permet d’activer ou de désactiver la fonction Aura Sync qui synchronise l’effet de lumière Aura RGB parmi tous les périphériques pris en charge. • Aura RGB : Dans cette fonction, vous pouvez sélectionner un effet de lumière Aura RGB pour le moniteur et modifier les paramètres de l’effet de lumière. Sélectionnez « Arrêt » si vous souhaitez désactiver l’effet de lumière Aura RGB. 8. • Si la fonction Aura Sync est réglée sur Marche, la fonction Aura RGB deviendra indisponible. • Voir « 3.
• Veille prolongée HDMI : Place le port HDMI en veille prolongée. Si le moniteur ne peut pas se réveiller après être entré en veille prolongée, procédez d’une des manières suivantes : - Appuyez sur un bouton (à l’exception du bouton d’alimentation) sur le moniteur pour le réveiller. - Désactivez la fonction Veille prolongée. 3-8 • Serrure : Pour désactiver toutes les touches de fonction. Appuyez sur plus de 5 secondes pour annuler la fonction serrure.
3.2 Aura Armoury Crate est un logiciel qui contrôle les DÉL colorées sur les périphériques pris en charge, comme les moniteurs, les cartes mères, les cartes graphiques, les PC de bureau, etc. Aura vous permet d’ajuster la couleur des DÉL RVB sur ces périphériques et de sélectionner différents effets de lumière. Vous pouvez également corriger ou ajuster la couleur des DÉL en les étalonnant. Pour activer Aura : 1. Réglez la fonction Aura Sync sur Marche dans le menu OSD. 2. Connectez le port USB 3.
3.3 3-10 Résumé des spécifications Type d’affichage TFT LCD Taille de l’écran Écran large 27" (16:9, 68,5 cm) Résolution max. 2560 x 1440 Taille des pixels 0,2331 mm x 0,2331 mm Luminosité (Typ.) 350 cd/m2 Rapport de contraste (Typ.) 1000:1 Angle de vision (H/V) CR > 10 178˚/178˚ Couleurs d’affichage 16,7 M Temps de réponse 1 ms (Gris à Gris) Sélection de la température des couleurs 8 températures de couleur Entrée analogique Non Entrée numérique DisplayPort v1.4 x 1, HDMI v2.
Multi-langues 20 langues (Anglais, Français, Allemand, Italien, Espagnol, Néerlandais, Portugais, Russe, Tchèque, Croate, Polonais, Roumain, Hongrois, Turc, Chinois simplifié, Chinois traditionnel, Japonais, Coréen, Thaï, Indonésien) Accessoires Guide de mise en route, carte de garantie, adaptateur d’alimentation, cordon d’alimentation, câble DP, câble HDMI, câble USB, couvercle du port entrée/sortie, rapport de test du calibrage des couleurs, carte de bienvenue ROG avec enveloppe, autocollant ROG Confo
3.4 Dimensions du contour ASUS PG279QM Outline Dimension *Unit: mm(inch) Pivot: +90 Degree 90 20 5 133.98 [5.3] 175.43 [6.9] 8.48 [0.3] 167.83 [6.6] 306.86 [12.1] 613.7 [24.2] 596.74 [23.5]-Active Area 560.48 [22.1] 7.95 [0.3] 22.63 [0.9] 335.66 [13.2]- Active area 367.21 [14.5] 140.02 [5.5] 254.96 [10.0] 25 507.22 [20.0] 88.72 [3.5] 22.26 [0.9] 31.71 [1.2] Swivel: +/-25 Degree 231.44 [9.1] 100 [3.9] 396.52 [15.6] 140.02 [5.5] 25 84.01 [3.3] 117 [4.6] 100 [3.
3.5 Guide de dépannage (FAQ) Problème Solution possible Le voyant DEL d'alimentation n’est • Appuyez sur le bouton d’alimentation pour vérifier si le moniteur est en mode ALLUMÉ. pas ALLUMÉ • Vérifiez si le cordon d'alimentation est correctement branché sur le moniteur et sur la prise de courant. Le voyant DEL d’alimentation est de couleur blanche et il n’y a aucune image sur l’écran • Vérifiez si le moniteur et l’ordinateur sont en mode ALLUMÉ.
3.6 Mode de fonctionnement pris en charge Entrée HDMI Résolution Fréquence Fréq. images 640 x 480 800 x 600 1024 x 768 1920 x 1080 P 1920 x 1080 P 1920 x 1080 P 1280 x 720 P 1280 x 720 P 720 x 480 P 720 x 576 P 640 x 480 P 1920 x 1080 P 60Hz 60Hz 60Hz 60Hz 50Hz 24Hz 60Hz 50Hz 60Hz 50Hz 60Hz 120Hz 2560 x 1440 60Hz Remarque Seulement pris en charge lorsque le format de couleur est RGB/YUV444 avec une profondeur de couleur de 8 ou 12 bits et YUV422 avec une profondeur de couleur de 12 bits.
Entrée DisplayPort Résolution Fréquence Fréq. images 640 x 480 800 x 600 1024 x 768 2560 x 1440 2560 x 1440 2560 x 1440 2560 x 1440 60Hz 60Hz 60Hz 60Hz 100Hz 120Hz 144Hz 2560 x 1440 200Hz Seulement pris en charge lorsque le format de couleur est RGB/YUV444 avec une profondeur de couleur de 8 bits et YUV422 avec une profondeur de couleur de 8 bits.
3-16 Chapitre 3 : Instructions générales
Moniteur LCD Série PG279QM d’ASUS 3-17