První vydání Červen 2018 Copyright © 2018 ASUSTeK COMPUTER INC. Všechna práva vyhrazena. Žádná část této příručky, včetně produktů a softwaru popsané v ní, nesmí být reprodukována, přenášena, přepisována, ukládána do systému pro opětovné zpřístupnění nebo překládána do jakéhokoli jazyka v jakékoli formě nebo jakýmkoli způsobem, kromě dokumentace uchovávané zákazníkem pro účely zálohování, bez výslovného předchozího písemného souhlasu společnosti ASUSTeK COMPUTER INC. („ASUS“).
Obsah Oznámení...................................................................................................... iv Bezpečnostní informace.............................................................................. v Péče a údržba............................................................................................... vi Takeback Services...................................................................................... vii Kapitola 1: Úvod k výrobku 1.1 Vítejte! .........................
Oznámení Vyjádření Federální komise pro komunikace (FCC) Toto zařízení splňuje podmínky části 15 směrnic FCC. Provoz podléhá následujícím dvěma podmínkám: • zařízení nesmí způsobovat škodlivé rušení a • musí přijmout všechna přijímaná rušení včetně takových, jež mohou způsobit nežádoucí provoz. Toto zařízení bylo testováno a vyhovuje omezením digitálních zařízení třídy B na základě části 15 směrnic FCC.
Bezpečnostní informace • Před instalací monitoru si pečlivě přečtěte veškerou dokumentaci dodanou v balení. • Monitor nikdy nevystavuje dešti ani vlhkosti, abyste předešli nebezpečí požáru nebo úrazu elektrickým proudem. • Nikdy se nepokoušejte otevřít skříň monitoru. Nebezpečná vysoká napětí uvnitř monitoru mohou způsobit vážné poranění. • Pokud se rozbije napájení, nepokoušejte se to opravit sami. Obraťte se na kvalifikovaného servisního technika nebo na váš maloobchod.
Péče a údržba • Před zvedáním nebo přemísťováním monitoru raději odpojte kabely a napájecí kabel. Při usazování monitoru používejte správný způsob zvedání. Při zvedání nebo přenášení uchopte monitor za jeho okraje. Displej nezvedejte za podstavec nebo kabel. • Čištění. Vypněte monitor a odpojte napájecí kabel. Povrch monitoru čistěte měkkým hadříkem, který nepouští vlas. Těžko odstranitelné skvrny lze odstranit hadříkem navlhčeným v jemném čisticím prostředku.
Kde najdete další informace Další informace a aktualizace týkající se produktu a software najdete v těchto zdrojích. 1. Internetové stránky ASUS Internetové stránky ASUS po celém světě poskytují aktualizované informace o produktech v oblasti hardware a software značky ASUS. Podívejte se na http://www.asus.com. 2. Další dokumentace Balení vašeho produktu může obsahovat další dokumentaci, kterou tam mohl přidat váš prodejce. Tyto dokumenty nejsou součástí standardního balení.
viii
1.1 Vítejte! Děkujeme za zakoupení monitoru LCD ASUS®! Nejnovější monitor LCD v širokoúhlém formátu od společnosti ASUS nabízí širší, jasnější a křišťálově čistý displej a řadu funkcí, které umocňují váš zážitek z prohlížení. Díky těmto funkcím si můžete užívat komfort a mít skvělý vizuální zážitek, který monitor přináší! 1.
1.3 Úvod k monitoru 1.3.1 Pohled zepředu 6 1 2 3 4 5 1. Tlačítko ( 5směrové): • Zapíná nabídku OSD. Aktivuje vybranou položku nabídky OSD. • Zvyšuje/snižuje hodnoty nebo posunuje výběr nahoru/dolů/vlevo/vpravo. • Zapne nabídku OSD, když monitor vstoupí do pohotovostního režimu nebo se zobrazí sdělení „NENÍ SIGNÁL“. 2. Tlačítko • Ukončení položky nabídky OSD. • Přepíná funkci zámku kláves mezi zapnout a vypnout dlouhým stisknutím po dobu 5 sekund.
4. Tlačítko • Klávesová zkratka GameVisual. Tato funkce obsahuje 6 podfunkcí, které můžete zvolit podle preference. • Zapne nabídku OSD, když monitor vstoupí do pohotovostního režimu nebo se zobrazí sdělení „NENÍ SIGNÁL“. 5. Tlačítko a indikátor napájení • Slouží k zapnutí a vypnutí monitoru. • Definici barvy indikátoru napájení ukazuje tabulka dole. Stav Popis Bílá ZAP. Oranžové blikání Přechod do pohotovostního režimu 6. Oranžová Pohotovostní režim/Žádný signál VYP. VYP.
10. Světlo v pohybu. 11. ROG světelný signál. Během používání se nedívejte přímo do zdroje světla. Intenzivní paprsek světla by vám mohl poškodit zrak. Otočením knoflíku zcela nahoru se světelný signál zakryje. 12. Rolovací kolečko ROG světelného signálu. 13. Větrací otvor (vstup vzduchu). Nezakrývejte větrací otvory na monitoru. Nahromaděním tepla se může zkrátit životnost monitoru a rovněž to může být nebezpečné. 14. Ovládací tlačítka. 15. Větrací otvor (výstup ohřátého vzduchu).
1.3.3 Funkce GamePlus Funkce GamePlus poskytuje sadu nástrojů a vytváří lepší herní prostředí pro uživatele při hraní různých druhů her. Překryvný vlasový kříž se šest možnostmi vlasového kříže vám umožňuje zvolit takový, který nejlépe odpovídá hrané hře. K dispozici je také časovač na obrazovce, který můžete umístit na levou stranu displeje, abyste mohli sledovat ubíhající čas hry; zatímco počítadlo FPS (snímků za sekundu) vám sděluje, jak hladce hra běží.
1.3.4 Funkce GameVisual Funkce GameVisual vám pomáhá vybírat mezi různými režimy obrazu praktickým způsobem. Aktivace funkce GameVisual: 1. Stiskněte klávesovou zkratku GameVisual. 2. Přesunutím tlačítka 3. Stiskněte tlačítko ( ) pro potvrzení zvolené funkce, a přesuňte tlačítko ( ) doleva pro přechod zpět, vypnutí a ukončení. ( ) nahoru/dolů můžete vybírat z různých funkcí.
2.1 Montáž ramene/podstavce monitoru 1. Vložte podstavec do ramene. 2 Připevněte podstavec k rameni pomocí dodaného šroubu. 3. Připevněte LED projekční kryt ke stojanu. 1 2 Doporučujeme přikrýt povrch stolu měkkou látkou, abyste zabránili poškození monitoru. Pokud chcete změnit fólii na LED projekčním krytu, postupujte podle obrázku níže.
2.2 Uspořádání kabelů Kabely si můžete uspořádat pomocí krytu vstupního/výstupního portu. 2-2 • Uspořádání kabelů • Používání krytu vstupního/výstupního portu: tento kryt lze připevnit nebo sundat.
2.3 Nastavení monitoru • Pro optimální komfort při sledování doporučujeme dívat se na celou plochu monitoru a potom upravit úhel tak, jak je to pro vás nejpohodlnější. • Při změně úhlu přidržte podstavec, abyste zabránili pádu monitoru. • Doporučený úhel nastavení je +20˚ až -5˚ (naklonění)/+35˚ až -35˚ (natočení)/+120 mm (nastavení výšky). -5° ~ +20° 120mm 35° 0° 35 ° Je běžné, že se monitor při nastavování úhlu pohledu nepatrně třese.
2.4 Sejmutí ramene (pro montáž na zeď VESA) Odnímatelné rameno tohoto monitoru je speciálně navrženo pro montáž na zeď VESA. Pro sejmutí ramene: 1. Položte monitor na stůl přední stranou dolů. 2. Pomocí šroubováku sejměte kryty ze spoje monitoru a ramene. 3. Povolte čtyři šrouby na zadní straně monitoru a sejměte rameno/podstavec. 4. Utáhnete šrouby pro montáž na stěnu. 1 2 3 4 5 Doporučujeme přikrýt povrch stolu měkkou látkou, abyste zabránili poškození monitoru.
2.5 Připojení kabelů Připojte kabely podle následujících pokynů: • • Připojení napájecího kabelu: a. Zapojte napájecí adaptér pevně do vstupu DC IN monitoru. b. Jeden konec napájecího kabelu zapojte do napájecího adaptéru a druhý konec do elektrické zásuvky. Připojení kabelu DisplayPort/HDMI: a. Jeden konec kabelu DisplayPort/HDMI zapojte do konektoru DisplayPort/HDMI na monitoru. b. Druhý konec kabelu DisplayPort/HDMI zapojte do portu DisplayPort/ HDMI počítače.
2-6 Kapitola 2: Nastavování
3.1 Nabídka OSD (On-Screen Display) 3.1.1 Změna konfigurace Normal Mode DisplayPort HDR Off Režim Závod 3840x2160@60Hz Aura Off ROG Swift PG27U Over Clocking Max. obn. frekvence 144 Hz Filtr Modrého Světla Barva Obraz Výběr vstupu Nastavení systému BACK MOVE/ENTER EXIT 1. Pro otevření nabídky OSD stiskněte tlačítko 2. Přesunutím tlačítka ( ) nahoru/dolů můžete procházet funkcemi. Zvýrazněte požadovanou funkci a stiskněte tlačítko ( ) pro její aktivaci.
• 2. Max. obn. frekvence 144 Hz: umožňuje vám vybrat maximální obnovovací frekvenci ve výši 144 Hz (pouze pro vstup DisplayPort). Po ( ) pro aktivaci nastavení. výběru dvakrát stiskněte tlačítko • Tato funkce je k dispozici, pouze když je barevná škála YUV422 s 10bitovou barevnou hloubkou nebo nižší. • Po restartování vyzkoušejte novou max. obnovovací frekvenci tak, že ji povolíte na ovládacím panelu NVIDIA.
3. Barva V této nabídce provedete nastavení barev. Normal Mode DisplayPort HDR Off Režim Závod 3840x2160@60Hz Aura Off ROG Swift PG27U 80 Over Clocking Jas Filtr Modrého Světla Referenční bílá (nity) Barva Kontrast Obraz Teplota barev Výběr vstupu Gamma 50 Nastavení systému BACK MOVE/ENTER EXIT • Jas: Rozsah nastavení je od 0 do 100. Když je povolena funkce HDR, Jas se změní na Špičková bílá (nity) 1000 a Referenční bílá (nity) nelze upravit v režimu SDR a HDR.
Když je tato funkce aktivní, může na tmavém pozadí docházet k mírnému halo efektu. To je normální a nejedná se o závadu. • Automatická úroveň černé: Zvyšuje úroveň černé podle okolního jasu tak, aby byly různé odstíny šedé viditelné pouhým okem. • Nastavení poměru stran: Slouží k úpravě poměru stran na Celá, Poměr stran nebo 1:1. 5. Výběr vstupu Tato funkce umožňuje vybrat požadovaný vstupní zdroj a zapnout a vypnout funkci automatického přepínání vstupu.
• Aura Sync: Umožňuje vám zapnout nebo vypnout funkci Aura Sync, která synchronizuje světelný efekt Aura RGB mezi všemi podporovanými zařízeními. • Aura RGB: V této funkci můžete vybrat světelný efekt Aura RGB pro monitor a změnit nastavení pro světelný efekt. Vyberte „VYPNUTO“, pokud chcete světelný efekt Aura RGB vypnout. • Pokud je funkce Aura Sync zapnutá, nebude funkce Aura RGB k dispozici. • Na stranách 3-7 najdete informace o tom, jak přizpůsobit světelné efekty Aura z počítače.
3-6 • Zobrazit SDR vstup: Při používání systémů na bázi operačního systému Microsoft doporučujeme nastavení „sRGB“. Při používání operačních systémů Mac doporučujeme nastavení „Široká škála“. • Obnovit vše: Výběrem „Ano“ můžete obnovit výchozí nastavení.
3.2 Aura AURA je softwarový program, který ovládá barevné LED na podporovaných zařízeních, jako jsou monitory, základní desky, grafické karty, stolní počítače atd. Aura vám umožňuje upravit barvu LED RGB u těchto zařízení a vybrat různé světelné efekty. Barvu LSD lze také opravit nebo upravit kalibrací. Aktivace programu Aura: 1. Zapněte funkci Aura Sync v nabídce OSD. 2. Propojte výstupní port USB 3.0 monitoru s portem USB počítače. 3. Nainstaluje program AURA a potom restartujte počítač. 4.
3.3 Souhrn specifikací Typ panelu Velikost panelu Maximální rozlišení Rozteč pixelů Jas (typ.) Kontrastní poměr (typ.) Úhel sledování (H/V) CR > 10 Barvy zobrazení Doba reakce Výběr teploty barev Analogový vstup Digitální vstup Konektor pro sluchátka Zvukový vstup Reproduktor (vestavěný) Port USB 3.0 Barvy LED napájení Teplota (provozní) TFT LCD 27" (16:9, 68,4 cm) široká obrazovka 3840 x 2160 0,15525 mm 1000 cd/m2 (vrchol/HDR zap.
Kompatibilita a normy UL/cUL, CB, CE, ErP, FCC, CCC, BSMI, CU, C-Tick, VCCI, PSE, CEL Level 3, J-MOSS, RoHS, WEEE, Windows 7 & 8.1& 10 WHQL, KCC, E-STANDBY, TUV-Flicker Free, TUV Low Blue Light, UkrSEPRO, RCM, MEPS *Technické parametry se mohou změnit bez předchozího upozornění. 3.4 Odstraňování potíží (Časté otázky) Problém Možné řešení Indikátor LED napájení není zapnut • Stiskněte tlačítko napájení a zkontrolujte, zda je monitor v režimu ZAPNUTO.
Při přehrávání 4K HDR obsahu se zobrazí • Zkontrolujte nastavení barevnosti ve zdroji poškozený poloviční obraz. obrazu pro správné fungování HDR. Ručně upravte související nastavení. Pokud problém přetrvává, kontaktujte výrobce zařízení. 3.5 Podporovaný provozní režim Vstup HDMI Frekvence rozlišení Obnovovací frekvence 640 x 480 60 Hz 800 x 600 60 Hz 1024 x 768 60 Hz 3840 x 2160 60 Hz Poznámka: Nepodporuje prokládání a barevnou škálu YUV420.
Vstup DisplayPort -- Přetaktování Frekvence rozlišení 3840 x 2160 Obnovovací frekvence 144 Hz Poznámka: Nepodporuje prokládaný signál. Vzhledem k tomu, že je HDR obsah zaměřen na rozlišení 4K (3840 x 2160), může mít jiné rozlišení ve výsledku abnormální zobrazení. Počkejte na aktivaci funkce Over Clocking (Přetaktování). Tento proces může trvat méně než 40 sekund. Grafické karty podporující přetaktování: Grafická karta NVIDIA Pascal GPU, například GTX1070, GTX1080 a GTX1080 Ti nebo vyšší.
3-12 Kapitola 3: Obecné pokyny