Erste Ausgabe Januar 2023 Copyright © 2023 ASUSTeK COMPUTER INC. Alle Rechte vorbehalten. Kein Teil dieser Anleitung, inklusive der hierin beschriebenen Produkte und Software, darf ohne ausdrückliche schriftliche Genehmigung der ASUSTeK COMPUTER INC. („ASUS“) auf irgendeine Weise oder Form reproduziert, übertragen, transkribiert, in Abrufsysteme gespeichert oder in eine andere Sprache übersetzt werden, außer in Form einer im Besitz des Käufers verbleibenden Sicherheitskopie.
Inhaltsverzeichnis Hinweise....................................................................................................... iv Hinweise zu Ihrer Sicherheit........................................................................ v Pflegen & Reinigen...................................................................................... vi Rücknahmeservices................................................................................... vii Produktinformationen für das EU Energielabel..................
Hinweise Erklärung der Federal Communications Commission Dieses Gerät erfüllt Teil 15 der FCC-Regularien. Der Betrieb unterliegt den folgenden beiden Voraussetzungen: • Dieses Gerät darf keine Funkstörungen verursachen, und • Dieses Gerät muss jegliche empfangenen Funkstörungen hinnehmen, einschließlich Störungen, die zu unbeabsichtigtem Betrieb führen können. Dieses Gerät wurde getestet und als mit den Grenzwerten für Digitalgeräte der Klasse B gemäß Teil 15 der FCC-Regularien übereinstimmend befunden.
Hinweise zu Ihrer Sicherheit • Lesen Sie sorgfältig die mitgelieferte Dokumentation durch, bevor Sie beginnen, den Monitor einzurichten. • Setzen Sie den Monitor weder Regen noch Feuchtigkeit aus, um einen Brand oder elektrischen Schlag zu vermeiden. • Versuchen Sie niemals das Monitorgehäuse zu öffnen. Die gefährliche Hochspannung innerhalb des Monitors kann ernsthafte Verletzungen verursachen. • Falls das Netzteil defekt ist, versuchen Sie es nicht in eigener Regie zu reparieren.
• Das Netzteil ist nur für diesen Monitor geeignet, nicht für andere Zwecke verwenden. Ihr Gerät nutzt eine der folgenden Stromversorgungen: - Hersteller: Delta Electronics Inc., Modell: ADP-90LE B • Achten Sie darauf, das Netzkabel an eine Steckdose mit Erdungsanschluss anzuschließen. • Das mitgelieferte Netzteil und/oder Netzkabel ist nur für die Verwendung mit diesem Produkt vorgesehen. Verwenden Sie es nicht mit anderen Produkten.
Darstellungssystematik in dieser Anleitung WARNUNG: Hier finden Sie wichtige Hinweise, um Verletzungen während des Ausführens einer Aufgabe zu vermeiden. VORSICHT: Hier finden Sie wichtige Hinweise, um Schäden an Komponenten während des Ausführens einer Aufgabe zu vermeiden. WICHTIG: Hier finden Sie wichtige Hinweise, die Sie beachten MÜSSEN, um eine Aufgabe fertig zu stellen. HINWEIS: Hier finden Sie Tipps und zusätzliche Informationen, die das Ausführen einer Aufgabe erleichtern.
viii
1.1 Willkommen! Vielen Dank für den Kauf eines ASUS® LCD-Monitors! Der aktuellste Breitbild-LCD-Monitor von ASUS bietet ein breiteres, helleres und kristallklares Bild sowie eine Vielzahl weiterer Funktionen, welche die Arbeit mit diesem Produkt zum Vergnügen machen. Durch diese Funktionen können Sie die Bequemlichkeit und das wunderbare visuelle Erlebnis des Monitors genießen! 1.
1.3 Einführung zum Monitor 1.3.1 Frontansicht/Seitenansicht 1 2 3 4 5 1. ( 5-Wege) Taste • Zum Einschalten des OSD-Menüs. Bestätigt die ausgewählte OSDMenüoption. • Erhöht/verringert Werte und navigiert bei der Auswahl nach oben/unten/ links/rechts. • Aktiviert das OSD-Menü, wenn der Monitor den Standbymodus aufruft oder die “KEIN SIGNAL” Meldung angezeigt wird. 2. Taste • Beendet die OSD-Menüoption. • Schaltet die Tastensperre durch 5 Sekunden langes Drücken ein und aus.
4. Taste • Standard: GameVisual. • Wählen Sie zum Ändern der Verknüpfungsfunktion das Menü Verknüpfung > Verknüpfung 2. • Aktiviert das OSD-Menü, wenn der Monitor den Standbymodus aufruft oder die “KEIN SIGNAL” Meldung angezeigt wird. 5. Stromschalter/Betriebsanzeige • Mit diese Taste schalten Sie den Bildschirm ein/aus. • Die folgende Tabelle zeigt die Bedeutung der Farben der Betriebsanzeige. 1.3.
9. Schlitz für Kensington-Schloss. 10. Kontrolltasten. 1.3.3 GamePlus Funktion GamePlus Funktion bietet ein Toolkit und erzeugt eine bessere Spielumgebung, wenn unterschiedliche Arten von Spielen gespielt werden. Bei der FadenkreuzÜberlagerung mit 6 verschiedenen Fadenkreuzoptionen können Sie dasjenige auswählen, das am besten zu Ihrem Spiel passt. Es gibt auch einen BildschirmTimer und eine Stoppuhr, die Sie links auf dem Bildschirm platzieren können, so dass Sie die Spielzeit im Auge behalten können.
1.3.4 GameVisual-Funktion Die GameVisual-Funktion ermöglicht Ihnen die komfortable Auswahl unterschiedlicher Bildmodi. Aktivierung von GameVisual: 1. Drücken Sie auf die GameVisual Verknüpfungstaste 2. Bewegen Sie die ( ) Taste nach oben/unten, um eine gewünschte Einstellung zu markieren. 3. Drücken Sie auf die ( ) Taste oder bewegen Sie die Taste nach rechts, um sie zu aktivieren. 4. Um das Menü zu beenden, bewegen Sie die ( ) Taste nach links.
1.3.5 HDR Der Monitor unterstützt das HDR Format. Beim Erkennen von HDR-Inhalten wird eine "HDR Ein" Meldung erscheinen und OSD-Menü angezeigt. Bei der Anzeige von HDR-Inhalten sind die folgenden Funktionen nicht verfügbar: ELMB, GameVisual, Shadow Boost, Helligkeit, Kontrast, ASCR, Dynamisches Dimmen, Blaulichtfilter, Farbtemp., Gamma, Sättigung.
ASUS-LCD-Monitor der Serie PG27UQR 1-7
1-8 Kapitel 1: Übersicht über das Produkt
2.1 Anbringen des Monitorarms/-fußes 1. Bringen Sie den Arm am Fuß an. 2. Sichern Sie den Monitorfuß mit Hilfe der mitgelieferten Schraube am Halter. Wir empfehlen Ihnen ein weiches Tuch auf den Tisch zu legen, um Schäden an dem Monitor zu vermeiden. Schraubengröße: M6 x 15 mm. 2.2 Kabelverwaltung Sie können die Kabel mit Hilfe der Abdeckung des Ein-/Ausgangsports organisieren.
2.3 Anpassen des Bildschirms • Schauen Sie bitte auf die volle Fläche des Bildschirms und passen die Position des Bildschirms an, um einen optimalen Blickwinkel zu erhalten. • Halten Sie den Monitorfuß fest, damit der Monitor beim Anpassen des Blickwinkels nicht umkippt. • Der empfohlene Einstellungswinkel ist +20˚ bis -5˚ (für Kippen)/+25˚ bis -25˚ (für Drehen)/ +100 mm (für Höhenanpassung).
2.4 Abnehmen des Halters (für VESAWandmontage) Der Halter des Monitors kann zur VESA-Wandmontage abgenommen werden. So nehmen Sie Arm/Basis ab: 1. Legen Sie den Monitor mit dem Bildschirm nach unten zeigend auf einen Tisch. 2. Verwenden Sie einen Schraubendreher, um die Abdeckungen, an denen der Monitor und der Arm befestigt sind, zu entfernen. 3. Lösen Sie die vier Schrauben an der Rückseite des Monitors und entfernen Sie den Arm/Fuß.
2.5 Anschließen der Kabel Schließen Sie die Kabel gemäß den nachstehenden Anweisungen an: • • So schließen Sie das Netzkabel an: a. Schließen Sie das Netzteil sicher am DC IN Eingang des Monitors an. b. Verbinden Sie ein Ende des Netzkabels mit dem Netzteil und das andere Ende mit einer Steckdose. So schließen Sie das DisplayPort/HDMI an: a. Verbinden Sie das eine Ende des DisplayPort/HDMI-Kabels mit dem DisplayPort/HDMI-Anschluss des Monitors. b.
2.6 Einschalten des Monitors Drücken Sie die Ein-/Austaste. Siehe Seite 1-3 für die Position des Stromschalters. Die Betriebsanzeige leuchtet auf, wenn der Monitor EIN geschaltet ist.
2-6 Kapitel 2: Einrichtung
3.1 Bildschirmmenü (OSD-Menü) 3.1.1 Bedienungsvorgang DisplayPort-1 3840x2160@ 30Hz Rennmodus Aura OFF ROG Swift PG27UQR HDR OFF Gaming Variabler OD Bildeinrichtung Adaptive-Sync (DP) Farbe ELMB/ELMB SYNC Eingangswahl GamePlus Lichteffekt GameVisual MyFavorite Shadow Boost System-Einstellungen BACK MOVE/ENTER 1. Drücken Sie die ( EXIT ) Taste, um das OSD-Menü aufzurufen. 2. Drücken Sie die ( ) Taste nach oben/unten, um durch die Funktionen zu steuern.
3.1.2 1. Einführung in die OSD-Funktionen Gaming DisplayPort-1 3840x2160@ 30Hz Rennmodus Aura OFF ROG Swift PG27UQR HDR OFF Gaming Variabler OD Bildeinrichtung Adaptive-Sync (DP) Farbe ELMB/ELMB SYNC Eingangswahl GamePlus Lichteffekt GameVisual MyFavorite Shadow Boost System-Einstellungen MOVE/ENTER • BACK EXIT Variabler OD: Verbessert die Graustufen-Reaktionszeit der LCD-Fläche. Diese Funktion ist nicht verfügbar, wenn ELMB aktiviert ist.
2. Bildeinrichtung DisplayPort-1 3840x2160@ 30Hz Rennmodus Aura OFF ROG Swift PG27UQR HDR OFF Gaming Helligkeit 100 Bildeinrichtung Kontrast 80 Farbe VividPixel Eingangswahl HDR Lichteffekt Dynamisches Dimmen MyFavorite ASCR System-Einstellungen Kontrollen Blaulichtfilter MOVE/ENTER BACK EXIT • Helligkeit: Der Einstellbereich reicht hier von 0 bis 100. • Kontrast: Der Einstellbereich reicht hier von 0 bis 100.
Bitte beachten Sie die folgenden Hinweise, um die Augenbelastung zu lindern: 3. • Benutzer sollten Pausen von der Benutzung des Monitors einlegen, wenn sie über viele Stunden hinweg daran arbeiten. Nach jeweils 1 Stunde Arbeit am Computer wird eine kurze Pause (mind. 5 Minuten) empfohlen. Kürzere und häufigere Pausen sind effektiver als eine einzelne lange Pause.
4. Eingangswahl Mit dieser Funktion können Sie Ihre bevorzugte Eingangsquelle auswählen. DisplayPort-1 3840x2160@ 30Hz Rennmodus Aura OFF ROG Swift PG27UQR HDR OFF Gaming Auto-Eingang-Erkennung Bildeinrichtung HDMI-1 Farbe HDMI-2 Eingangswahl DisplayPort-1 Lichteffekt DisplayPort-2 MyFavorite System-Einstellungen BACK MOVE/ENTER EXIT • Auto-Eingang-Erkennung: Wenn aktiviert, wählt das System automatisch den zuletzt verbundenen E/A Anschluss.
6. MyFavorite DisplayPort-1 3840x2160@ 30Hz Rennmodus Aura OFF ROG Swift PG27UQR HDR OFF Gaming Verknüpfung Bildeinrichtung Benutzerdefinierte Einstellung Farbe Eingangswahl Lichteffekt MyFavorite System-Einstellungen BACK MOVE/ENTER • EXIT Verknüpfung: • Verknüpfung 1/Verknüpfung 2: Stellt die Verknüpfungsfunktionen für die Verknüpfungstasten ein. Wenn eine bestimmte Funktion ausgewählt oder aktiviert wird, wird Ihre Verknüpfungstaste möglicherweise nicht unterstützt.
• USB Hub: Schaltet die USB Hub Funktion im Standbymodus Ein/Aus. Diese Funktion ist nicht verfügbar (auf Ein im Standby gestellt) wenn Aura Sync aktiviert ist. • Betriebsanzeige: Hiermit de-/aktivieren Sie die Betriebsanzeige-LED. • Ein-/Austaste-Sperre: Aktiviert oder deaktiviert die Ein/Aus-Taste. • Tastensperre: Zur Deaktivierung aller Funktionstasten. Drücken Sie länger als 5 Sekunden auf , um die Tastensperrfunktion zu deaktivieren.
3.2 Aura Armoury Crate ist ein Softwareprogramm, das die bunten LEDs auf unterstützten Geräten wie Monitoren, Motherboards, Grafikkarten, Desktop-PCs usw. steuert. Aura ermöglicht es Ihnen, die Farbe der RGB-LEDs an diesen Geräten anzupassen und verschiedene Lichteffekte auszuwählen. Sie können auch die Farbe der LEDs korrigieren oder anpassen, indem Sie sie kalibrieren. Um Aura zu aktivieren: 1. Schalten Sie die Aura Sync Funktion im OSD-Menü EIN. 2. Verbinden Sie den USB 3.
3.3 Technische Daten Bildschirmtyp TFT-LCD Bildschirmgröße 27 Zoll-Breitbild (16:9, 68,4 cm) Max. Auflösung 3840 x 2160 Pixelabstand 0,155 mm x 0,155 mm Helligkeit (i.d.R.) 400 cd/m2 (SDR); 600 cd/m2 (HDR) Kontrastverhältnis (i.d.R.) 1000:1 Betrachtungswinkel (H/V) CR>10 178˚/178˚ Anzeigefarben 1,07 B (8-Bit+Hi_FRC) Ansprechzeit 1 ms (grau zu grau) Farbtemperaturauswahl 4 Farbtemperaturen Analoger Eingang Nein Digitaleingang DisplayPort v1.4 x 2, HDMI v2.
Mehrsprachige Menüanzeige Zubehör Konformität und Normen 22 Sprachen (Englisch, Französisch, Deutsch, Italienisch, Spanisch, Niederländisch, Portugiesisch, Russisch, Tschechisch, Kroatisch, Polnisch, Rumänisch, Ungarisch, Türkisch, Vereinfachtes Chinesisch, Traditionelles Chinesisch, Japanisch, Koreanisch, Thailändisch, Indonesisch, Persisch, Ukrainisch) Schnellstartanleitung, Garantiekarte, Netzteil, Netzkabel, DP Kabel, HDMI Kabel, USB Kabel, Eingangs-/Ausgangsanschluss Abdeckung, Farbkalibrierungsprüf
3.4 Äußere Abmessungen ASUS PG27UQR Outline Dimension *Unit : mm(inch) 20 [5.3] [5.55] 175.73 5 134.65 141.02 [6.92] [0.7] 367.21 [24.86] 25 631.47 17.77 [14.46] [24.16] Swivel : +/- 25 Degree 613.7 [23.47] Active Area 298.08 AA Center [22.06] Povit : +90 Degree 596.16 560.37 [11.74] 90 254.9 [10.04] [6.44] 164.78 [6.49] 167.67 [6.6] 335.34 508.22 [13.2] Active Area 25 163.64 [20.01] 31.67 22.22 [1.25] [0.88] 88.72 [3.49] 100 332.45 [3.94] [13.09] 397.53 89.
3.5 Fehlerbehebung (häufig gestellte Fragen) Problem 3-12 Mögliche Lösung Die Betriebs-LED leuchtet nicht • Drücken Sie die Ein/Aus-Taste, um zu überprüfen, ob sich der Monitor im EIN-Modus befindet. • Prüfen Sie, ob das Netzkabel richtig mit dem Monitor und der Steckdose verbunden ist. Die Betriebs-LED leuchtet weiß und kein Bild erscheint • Prüfen Sie, ob der Monitor sowie der Computer im normalen Betriebszustand ist.
3.
Auflösung Frequenz Horizontale Frequenz 2560 x 1440 2560 x 1440 2560 x 1440 3840 x 2160 3840 x 2160 120Hz 60Hz 144Hz 144Hz 150Hz 3840 x 2160 160Hz Hinweis: Unterstützt kein Interlace.
Auflösung Frequenz Horizontale Frequenz 3840 x 2160p 3840 x 2160p 3840 x 2160p 3840 x 2160p 3840 x 2160p 3840 x 2160p 3840 x 2160 2560 x 1440 2560 x 1440 2560 x 1440 3840 x 2160 3840 x 2160 23,98/24Hz 25Hz 29,97/30Hz 50Hz 59,94/60Hz 119,88/120Hz 60Hz 120Hz 60Hz 144Hz 144Hz 150Hz 3840 x 2160 160Hz Hinweis: Interlace und Farbraum YUV420 werden nicht unterstützt.
3-16 Kapitel 3: Allgemeine Hinweise
ASUS-LCD-Monitor der Serie PG27UQR 3-17