MANUAL E U T E N T E
Contenuti Avvisi............................................................................................................ iii Informazioni sulla sicurezza....................................................................... iv Cura e pulizia............................................................................................... vi 1.1 Benvenuto...................................................................................... 1-1 1.2 Contenuti della confezione..............................
Avvisi Dichiarazione della Commissione Federale per le Comunicazioni Questo dispositivo è conforme alla Parte 15 delle Norme FCC. Il funzionamento è soggetto alle seguenti due condizioni: • Questo dispositivo non può provocare interferenze dannose. • Questo dispositivo deve poter ricevere qualsiasi interferenza, incluse quelle che potrebbero causare un funzionamento indesiderato.
Informazioni sulla sicurezza iv • Prima di configurare il monitor, leggere attentamente tutta la documentazione fornita. • Per prevenire pericoli di incendi o scosse elettriche, non esporre il monitor a pioggia o umidità. • Non cercare di aprire l’alloggiamento del monitor. Le alte tensioni pericolose all’interno del monitor potrebbero causare gravi lesioni fisiche. • Se l’alimentatore è rotto, non cercare di ripararlo da soli. Contattare un tecnico qualificato o il proprio rivenditore.
• Utilizzare l'adattatore ADP-150CH B di DELTA. • Verificare che il sistema di distribuzione nell'impianto dell'edificio disponga dell'interruttore di circuito da 120/240 V, 20 A (massimo). • Se dotato di una spina tripolare sul cavo di alimentazione, collegare il cavo a una presa tripolare con messa a terra. Non disabilitare il dentello di messa a terra del cavo di alimentazione, ad esempio collegando un adattatore a 2 pin. Il dentello di messa a terra è un importante requisito di protezione.
Cura e pulizia • Prima di sollevare o spostare il monitor, è meglio scollegare i cavi e il cavo di alimentazione. Osservare le corrette tecniche di sollevamento durante il posizionamento del monitor. Quando si solleva o trasporta il monitor, afferrarlo dai bordi. Non sollevare il display dal supporto o dal cavo. • Pulizia. Spegnere il monitor e scollegare il cavo di alimentazione. Pulire la superficie del monitor con un panno non abrasivo privo di lanugine.
Dove trovare ulteriori informazioni Consultare le seguenti fonti per ulteriori informazioni e per gli aggiornamenti su prodotti e software. 1. Siti web ASUS I siti web ASUS in tutto il mondo forniscono informazioni aggiornate su hardware e software ASUS. Consultare http://www.asus.com 2. Documentazione opzionale La confezione del prodotto potrebbe includere documentazione opzionale aggiunta dal rivenditore. Tali documenti non fanno parte della confezione standard.
1.1 Benvenuto Congratulazioni per l'acquisto del monitor LCD ASUS®! L’ultimo monitor LCD widescreen ASUS offre immagini nitide, più ampie e più luminose, oltre ad una miriade di caratteristiche che migliorano la visualizzazione. Con queste funzioni si godrà della comodità e della deliziosa esperienza visiva fornita dal monitor! 1.
1.3 Montaggio del monitor Per assemblare il monitor: • Durante il montaggio del braccio o della base del monitor, si raccomanda di lasciare il monitor all'interno della sua confezione in polistirolo. 1. Allineare il foro della vite sul braccio conla vite fornita insieme alla base. Inserire quindi la base nel braccio. 2. Fissare la base al braccio serrando la vite fornita in dotazione. 3. Togliere il monitor dalla confezione in polistirolo espanso.
1.4 Collegamento dei cavi 1.4.1 Retro del monitor LCD 9 DCIN 1 2 3 4 1. Porta ingresso DC 2. Porta USB3.0 upstream 3. Porta USB3.0 downstream 4. Porta USB3.0 downstream 5. Porta HDMI2.0 6. Porta HDMI2.0 7. DisplayPort 8. Connettore cuffie 9.
1.5 Presentazione del monitor 1.5.1 Uso dei tasti di controllo Utilizzare i tasti del pannello posteriore del monitor per regolare le impostazioni del monitor. 6 6 5 5 4 4 3 3 2 2 1 1. Indicatore alimentazione: • 2. Stato Descrizione Bianco ATTIVO Giallo Modalità standby SPENTO SPENTO Tasto di alimentazione: • 3. Premere questo tasto per accendere/spegnere il monitor. Premere questo tasto per accendere il monitor quando è spento.
• • • Premere GamePlus per accedere al menu principale GamePlus. Attiva la funzione Mirino, Timer o Contatore FPS, oppure Allineamento schermo. Spostare il tasto e premere • verso l'alto/il basso per selezionare per confermare la funzione desiderata. Premere il tasto per uscire e chiudere. Mirino/Timer/Contatore FPS può essere spostato premendo il tasto a 5 direzioni. Per attivare Cecchino, è necessario disabilitare HDR sul dispositivo.
2.1 Regolazione del monitor • Per una visione ottimale, si consiglia di guardare l’intero monitor, quindi regolare il monitor in base all’angolo di visione più comodo. • Afferrare il supporto per impedire che il monitor cada quando si cambia l'inclinazione. • L’angolazione del monitor può essere regolata da -5˚ e 20˚ ed è consentita una rotazione verso sinistra o destra di 25°. L’altezza del monitor può essere regolata di +/-10 cm.
2.
2.3 Staccare il braccio/supporto (per montaggio su parete VESA) • Evitare di danneggiare la superficie del monitor. Quando si stacca il supporto del monitor, tenere sempre il monitor all'interno della confezione in politstirolo espanso. La base staccabile di questo monitor è progettata in modo particolare per il montaggio su parete VESA. Per rimuovere il braccio/supporto 1. Scollegare i cavi di alimentazione e del segnale.
3.1 Menu OSD (On-Screen Display) 3.1.1 Come effettuare la riconfigurazione DisplayPort 2560x1440@165Hz Scenery Mode Aura Off ROG Swift PG329Q HDR OFF Gaming Overclocking Image Variable OD Color Adaptive-Sync Input Select ELMB/ELMB SYNC PIP/PBP Setup GamePlus Lighting Effect GameVisual MyFavorite Shadow Boost System Setup MOVE/ENTER BACK EXIT 1. Premere il tasto centrale a 5 vie per visualizzare il menu OSD. 2. Premere i tasti su e giù per cambiare le opzioni nel menu.
3.1.2 1. Introduzione alle funzioni dell’OSD Gioco DisplayPort 2560x1440@165Hz Scenery Mode Aura Off ROG Swift PG329Q HDR OFF Gaming Overclocking Image Variable OD Color Adaptive-Sync Input Select ELMB/ELMB SYNC PIP/PBP Setup GamePlus Lighting Effect GameVisual MyFavorite Shadow Boost System Setup MOVE/ENTER BACK EXIT • Overclock: Questa funzione consente di regolare la frequenza di aggiornamento solo in DP. • OD Variabile: Accelera il tempo di risposta con tecnologia Over Drive.
2. Immagine È possibile regolare Luminosità, Contrasto, HDR, VividPixel, Regol. Dinam. Lumi., ASCR, Controlli e Filtro luce blu da questa funzione principale. DisplayPort 2560x1440@165Hz Scenery Mode Aura Off ROG Swift PG329Q HDR OFF Gaming Brightness 90 Image Contrast 80 Color HDR Input Select Vivldplxel PIP/PBP Setup Dynamic Dimming Lighting Effect ASCR MyFavorite Aspect Control System Setup Blue Light Filter MOVE/ENTER EXIT • Luminosità: La gamma di regolazione è tra 0 e 100.
• Quando si attiva Filtro luce blu, vengono automaticamente importate le impostazioni predefinite di Modalità gara. • Tra Livello 1 e Livello 3, la funzione Luminosità è configurabile dall'utente. • Livello 4 è un'impostazione ottimizzata. È conforme alla certificazione TUV di luce blu ridotta. La funzione Luminosità non è configurabile dall'utente.
3. Colore Selezionare il colore di immagine preferito con questa funzione. DisplayPort 2560x1440@165Hz Scenery Mode Aura Off ROG Swift PG329Q HDR OFF Gaming Color Temp. Image Gamma Color Saturation Input Select PIP/PBP Setup Lighting Effect MyFavorite System Setup BACK MOVE/ENTER • Colore: Contiene tre modalità colore predefinite (Freddo, Normale, Caldo) ed una Modalità Utente. • Gamma: Contiene tre modalità gamma che comprendono 1.8, 2.2, 2.5.
5. Configurazione PIP/PBP L'impostazione PIP/PBP consente di aprire le finestre secondarie connesse a una sorgente video. DisplayPort 2560x1440@165Hz Scenery Mode Aura Off ROG Swift PG329Q HDR OFF Gaming PIP/PBP Mode Image PIP/PBP Source Color Color setting Input Select PIP Size PIP/PBP Setup Lighting Effect MyFavorite System Setup MOVE/ENTER BACK EXIT Attivando questa funzione, il monitor visualizza due, tre o quattro immagini per qualsiasi origine video.
6. Effetto luce DisplayPort 2560x1440@165Hz Scenery Mode Aura Off ROG Swift PG329Q HDR OFF Gaming Aura Sync Image Aura RGB Color Input Select PIP/PBP Setup Lighting Effect MyFavorite System Setup BACK MOVE/ENTER • Aura Sync: Consente di attivare o disattivare la funzione Aura Sync che soncronizza l'effetto luminoso AURA RGB su tutti i dispositivi supportati.
8. • Collegamento: L'utente può scegliere tra “GamePlus, GameVisual, Modalità Utente, Luminosità, Contrasto, Configurazione PIP/PBP, Selezione input, HDR, Filtro luce blu, Colore, Volume, MyFavorite-1 (Load), MyFavorite-2 (Load)” per impostare il tasto di scelta rapida. • Imp. Personalizzata: È possibile eseguire le impostazioni in base alle preferenze. Imp Sistema Regola la configurazione del sistema.
3-8 • USB Hub: Attivare/disattivare la funzione Hub USB durante la modalità standby. • Indicatore alimentazione: Accende/spegne l’indicatore LED d’alimentazione. • Blocco tasto accensione: Per disabilitare/abilitare il tasto d’alimentazione • Blocco tasti: Disabilita le funzioni di tutti i tasti. Premere il tasto giù per oltre cinque secondi per disabilitare la funzione di blocco tasti. • Impostazione OSD: Regola Tempo attesa OSD, DDC/CI e Trasparenza del menu OSD. • DisplayPort Ver.
3.2 Specifiche Modello Dimensioni schermo PG329Q 32" W (81,3 cm) Risoluzione max. 2560 x 1440 a 175 Hz (Overclock) Luminosità (tipico) 400 nit (tipica), 600 nit (picco) Rapporto di contrasto intrinseco (tipico) Angolo di visualizzazione (CR>10) Colori dello schermo Tempo di risposta 1000:1 178°(V) /178°(H) 1,07B 1 ms (G To G ) Audio da HDMI Sì Ingresso HDMI HDMI2.0 x 2 Ingresso DisplayPort Sì PBP Sì Porta USB3.
3.3 Risoluzione dei problemi (FAQ) Problema Il LED di alimentazione non è attivo Il LED di alimentazione si accende in giallo e non appare alcuna immagine sullo schermo Immagine su schermo troppo chiara o scura L’immagine sullo schermo sobbalza o nell’immagine è presenta una forma d’onda L’immagine sullo schermo presenta difetti di colore (il bianco non sembra bianco) Nessun audio o audio basso 3-10 Possibile soluzione • Premere il tasto per controllare se il monitor è in modalità ATTIVO.
3.
Temporizzazione video Temporizzazione video Temporizzazione video Temporizzazione video Temporizzazione video Temporizzazione video Temporizzazione video Temporizzazione video Temporizzazione video Temporizzazione video Temporizzazione video Temporizzazione video Temporizzazione video Temporizzazione video 1280 720P 50 O O O 1280 720P 59,94/60 O O O 1440 480P 59,94/60 O O O 1440 576P 50 O O O 1920 1080P 50 O O O 1920 1080P 59,94/60 O O O 2560 1080P 59,94/60 O O O 1