User Guide
Table Of Contents
- Contents
- Notices
- Safety information
- Care & Cleaning
- Takeback Services
- Product information for EU energy label
- Chapter 1: Product introduction
- 1.1 Welcome!
- 1.2 Package contents
- 1.3 Monitor introduction
- Chapter 2: Setup
- 2.1 Attaching the arm/base
- 2.2 Cable management
- 2.3 Detaching the arm/base (for VESA wall mount)
- 2.4 Adjusting the monitor
- 2.5 Connecting the cables
- 2.6 Turning on/off the monitor
- Chapter 3: General instructions
- 3.1 OSD (On-Screen Display) menu
- 3.2 Aura
- 3.3 Specifications summary
- 3.4 Outline dimensions
- 3.5 Troubleshooting (FAQ)
- 3.6 Supported operating modes
1-3ASUS PG32UQX Series LCD Monitor
• Enacts the selected OSD menu items.
• Toggles the Key Lock function between on and off with a long press for
5 seconds.
4. Shortcut(Left)
• Turns on the monitor when the monitor enters standby mode or displays
the “NO SIGNAL“ message.
• Default: GamePlus hotkey
• To change the hotkey function, go to the Shortcut > Shortcut(Left)
menu.
5. LiveDash OLED panel
• Displays the information that you specied in the System Setup >
LiveDash menu.
6. OSD dial
• Increases/Decreases values or moves your selection up/down/left/
right.
1.3.2 Back view
5 6 7 8
9
14
12
13
12
10
9
11
9
6
1. DC-IN port. This port connects the power cord.
2. For service personnel only.
3. HDMI ports. These ports are for connection with an HDMI compatible
device.
4. DisplayPort in. This port is for connection with a DisplayPort compatible
device.
5. USB upstream port. This port is for connection with a USB upstream cable.
The connection enables the USB ports on the monitor.
6. USB downstream ports. These ports are for connection with USB devices,
such as USB keyboard/mouse, USB ash drive, etc.