User Guide
Table Of Contents
- Contents
- Notices
- Safety information
- Care & Cleaning
- Takeback Services
- Product information for EU energy label
- Chapter 1: Product introduction
- 1.1 Welcome!
- 1.2 Package contents
- 1.3 Monitor introduction
- Chapter 2: Setup
- 2.1 Attaching the arm/base
- 2.2 Cable management
- 2.3 Detaching the arm/base (for VESA wall mount)
- 2.4 Adjusting the monitor
- 2.5 Connecting the cables
- 2.6 Turning on/off the monitor
- Chapter 3: General instructions
- 3.1 OSD (On-Screen Display) menu
- 3.2 Aura
- 3.3 Specifications summary
- 3.4 Outline dimensions
- 3.5 Troubleshooting (FAQ)
- 3.6 Supported operating modes
3-7ASUS PG32UQX Series LCD Monitor
If the monitor cannot wake up after going into deep sleep, do one of the
followings:
- Press any button on the monitor to wake it up.
- Disable the Deep Sleep function.
• Key Lock: To disable all function keys. Press the OK button for over 5
seconds to cancel the key lock function.
• OSD Setup:
* OSD Position: Adjusts the horizontal position (H-Position)/the vertical
position (V-Position) of the OSD.
* OSD Timeout: Adjusts the OSD timeout from 10 to 120 seconds.
* Transparency: Adjusts the OSD background from opaque to
transparent.
• LiveDash:
* PC Control: When “ON” is selected, the infromation displayed
on the LiveDash OLED panel is controlled by the Armoury Crate
software.
* OSD Control: Sets the information to be displayed on the LiveDash
OLED panel.
When a certain function is selected or activated, some options may not be
available.
* Brightness: Selects the brightness level of the LiveDash OLED panel
on the front of the monitor. The adjusting range is from “OFF” to “Level
3”.
• Information: Shows the monitor information.
• All Reset: “Yes” allows you to restore the default settings.