Ensimmäinen painos Helmikuu 2021 Copyright © 2021 ASUSTeK COMPUTER INC. Kaikki oikeudet pidätetään. Tämän käyttöoppaan osia tai siinä kuvattuja tuotteita ja ohjelmistoja ei saa monistaa, siirtää, jäljentää, tallentaa hakujärjestelmään tai kääntää millekään kielelle missään muodossa tai millään tavalla, lukuun ottamatta dokumentaatiota, jonka ostaja on säilyttänyt varmistustarkoituksessa, ilman ASUSTeK COMPUTER INC:n (”ASUS”) erikseen myöntämää, kirjallista lupaa.
Sisältö Sisältö .......................................................................................................... iii Ilmoitus......................................................................................................... iv Turvallisuustiedot......................................................................................... v Huolto ja puhdistus..................................................................................... vi Takeback Services.................................
Ilmoitus Federal Communications Commissionin ilmoitus Tämä laite täyttää FCC-määräysten osan 15 vaatimukset. Laitteen käyttö on seuraavien ehtojen alaista: • Tämä laite ei saa aiheuttaa haitallisia häiriöitä ja • Tämän laitteen on siedettävä muualta tuleva häiriö, myös mahdollisesti asiaankuulumatonta toimintaa aiheuttavat häiriöt. Tämä laite on testattu, ja sen on osoitettu täyttävän FCC-määräysten osassa 15 luokan B digitaalilaitteille asetetut raja-arvot.
Turvallisuustiedot • Lue huolellisesti kaikki toimitukseen kuuluvat asiakirjat ennen näytön asettamista. • Estääksesi tulipalon tai sähköiskun vaaran älä koskaan altista näyttöä sateelle tai kosteudelle. • Älä koskaan yritä avata näytön koteloa. Näytön sisällä oleva vaarallisen korkea jännite voi johtaa vakavaan fyysiseen vammaan. • Jos virtalähde on rikkoutunut, älä yritä korjata sitä itse. Ota yhteys pätevään huoltoteknikkoon tai jälleenmyyjään.
Tämä yli ruksattu roskakori osoittaa, että tuotetta (elektroniikka tai elohopeaa sisältävä nappipatteri) ei saa hävittää kotitalousjätteen mukana. Tarkista paikalliset määräykset elektroniikkatuotteiden hävittämisestä. Huolto ja puhdistus • Ennen kuin nostat tai sijoitat näytön uuteen paikkaan, on parempi irrottaa kaapelit ja virtajohto. Sijoita näyttö uuteen paikkaan oikealla nostotekniikalla. Kun nostat tai kannat näyttöä, pidä kiinni näytön reunoista. Älä nosta näyttöä sen telineestä tai johdosta.
Mistä löydät lisätietoja Katso seuraavista lähteistä lisätietoja sekä tuote- ja ohjelmistopäivityksiä. 1. ASUS:n verkkosivut ASUS-yrityksen maailmanlaajuiset verkkosivustot tarjoavat päivitettyjä tietoja ASUS-laitteisto- ja -ohjelmistotuotteista. Katso: http://www.asus.com 2. Valinnainen dokumentaatio Tuotteen pakkaus saattaa sisältää jälleenmyyjän lisäämiä valinnaisia asiakirjoja. Nämä asiakirjat eivät sisälly vakiopakkaukseen.
viii
1.1 Tervetuloa! Kiitos, kun ostit ASUS® LCD-näytön! ASUS:n uusin laajakuva-LCD-näyttö tarjoaa leveämmän, kirkkaamman ja kristallinkirkkaan näytön sekä runsaasti ominaisuuksia, jotka parantavat katselukokemustasi. Näillä ominaisuuksilla varustettuna pääset nauttimaan näytön tuomista ilahduttavista visuaalisista elämyksistä! 1.
1.3 Näytön esittely 1.3.1 Etunäkymä 6 1. 3. 1-2 4 3 2 1 Virran merkkivalo • 2. 5 Virran merkkivalon värimääritelmä on alla olevan taulukon mukainen. Tila Kuvaus Valkoinen PÄÄLLÄ POIS POIS Välkkyy oranssina Siirtyy valmiustilaan Oranssi Valmiustila/Ei signaalia Vihreä Punainen HDR/HDR+G-SYNC G-SYNC Oikopolku (Oikea) • Kytkee näytön päälle, kun näyttö siirtyy valmiustilaan tai näyttää “NO SIGNAL“ (EI SIGNAALIA) -viestin.
4. • Ottaa käyttöön valittuja OSD-valikon kohteita. • Vaihtaa Key Lock (Näppäimistölukko) toimintoa päälle ja pois pitkällä painalluksella 5 sekunnin ajan. Oikopolku (Vasen) 5. • Kytkee näytön päälle, kun näyttö siirtyy valmiustilaan tai näyttää “NO SIGNAL“ (EI SIGNAALIA) -viestin. • Oletus: GamePlus-pikanäppäin • Vaihda pikanäppäimen toimintoa siirtymällä Shortcut (Oikopolku) > Shortcut (Left) (Oikopolku (Vasen)) -valikkoon. LiveDash OLED-paneeli • 6.
8. Kensington-lukon aukko. 9. Tuuletusaukko (lämmitetyn ilman poisto). Älä peitä ilmanottoaukkoja näytössä. Lämmön muodostuminen voi lyhentää näytön käyttöikää ja olla myös vaarallista. 10. Ruuvireikä (kolmijalan ruuvia varten). 11. Valoanturi. 12. AURA RGB/AURA Sync (Armoury Crate -ohjelmiston hallitsema). 13. Valo liikkeessä. 14. Tuuletusaukko (ilmanotto). Älä peitä ilmanottoaukkoja näytössä. Lämmön muodostuminen voi lyhentää näytön käyttöikää ja olla myös vaarallista. 1.3.
GamePlus-päävalikko GamePlus — Crosshair (Tähtäin) Crosshair GamePlus OFF Crosshair Timer Stopwatch FPS FPS Counter Display Alignment GamePlus — Timer (Ajastin) GamPlus — FPS Counter (FPS-laskuri) Timer FPS FPS Counter OFF OFF 30:00 001 Number Bar Graph 40:00 50:00 60:00 90:00 1.3.4 GameVisual -toiminto GameVisual-toiminto auttaa valitsemaan eri kuvatiloja mukavalla tavalla. Aktivoi GameVisual: 1. Paina GameVisual -oikopolkupainiketta 2.
• Scenery Mode (Näkymätila): Tämä on paras valinta maisemakuvien katseluun GameVisualTM Video intelligence -tekniikalla. • Racing Mode (Racing-tila): Tämä on paras valinta racing-pelaamiseen GameVisualTM Video intelligence -tekniikalla. • Cinema Mode (Elokuvatila): Tämä on paras valinta elokuvien katseluun GameVisualTM Video intelligence -tekniikalla. • RTS/RPG Mode (RTS/RPG-tila): Tämä on paras valinta RTS/RPGpelaamiseen (reaaliaikainen strategia- ja roolipeli) GameVisualTM Video intelligence -tekniikalla.
ASUS PG32UQX-sarjan LCD-näyttö 1-7
1-8 Kappale 1: Tuotteen esittely
2.1 Varren/alustan kiinnitys Kokoan näytön jalusta: 1. Aseta jalusta varteen (Kuva 1). 2. Kiinnitä jalusta varteen ruuvilla. (Kuva 2). 3. Poista kumikorkki alustan pohjasta. (Kuva 2). 4. Kiinnitä LED-projisointisuojus jalustaan. (Kuva 3). (Kuva 1)  1 3 2 (Kuva 3) (Kuva 2) LED-projisointisuojuksen kalvon vaihto alla olevan kuvan mukaisesti.
2.2 Kaapelien hallinta Voit järjestää kaapelit kaapelin tulo/lähtöportin kannen avulla. 2-2 • Kaapelien järjestäminen • Tulo/lähtöportin suojus: Suojus voidaan liittää tai irrottaa.
2.3 Varren/alustan irrotus (VESA-seinäkiinnikkeelle) Tämän näytön irrotettava jalusta on suunniteltu varta vasten VESAseinäkiinnitykselle. Varren irrotus: 1. Aseta näytön etupuolin alaspäin pöydälle. 2. Käytä ruuvimeisseliä poistaaksesi suojukset kohdasta, jossa näyttö ja varsi kohtaavat. 3. Irrota neljä ruuvia näytön takaa ja poista varsi/jalusta. 4. Kiinnitä seinäkiinnikkeen ruuvit. 1 2 3 4 5 Käsittele varoen välttääksesi vammoja ja näytön vaurioitumista.
2.4 Näytön säätäminen • Parhaaksi katselukulmaksi suositellaan näytön koko tasoa, säädä sitten näytön kulmaa haluamasi mukaan. • Pidä kiinni jalustasta näytön kulmaa säätäessäsi, ettei se putoa. • Voit säätää näytön kulmaa +20˚ - -5˚, ja se mahdollistaa 20˚ käännön säädötn joko vasemmalle tai oikealle. Voit myös säätää näytön korkeutta +/- 70 mm.
2.5 Kaapeleiden liittäminen Liitä kaapelit ohjeiden mukaisesti: Vain huoltoa varten  • • Yhdistä virtajohto: a. Yhdistä virtasovitin tiukasti näytön DC IN -tuloon. b. Kytke virtajohdon toinen pää virtasovittimeen, ja kytke toinen pää pistorasiaan. Yhdistä HDMI/DisplayPort -kaapeli: a. Kytke HDMI/DisplayPort -kaapelin toinen pää näytön HDMI/DisplayPortliittimeen. b. Yhdistä HDMI/DisplayPort -kaapelin toinen pää laitteesi HDMI/ DisplayPort-liittimeen.
2.6 • Kytkee näytön päälle/pois Näytön kytkeminen päälle: Paina mitä tahansa painiketta. Katso painikkeiden sijainti sivuilta 1-2. Virran merkkivalo syttyy valkoisena näyttäen, että näyttö on PÄÄLLÄ. • Näytön kytkeminen pois: Käännä OSD-valitsinta oikelle korotaaksesi 2-6 , ja paina OK-painiketta.
ASUS PG32UQX-sarjan LCD-näyttö 2-7
2-8 Kappale 2: Asetukset
3.1 Kuvaruutu (OSD) -valikko 3.1.1 Uudelleenmääritys GameVisual Racing Mode Input Select HDMI-1 HDR OFF OD Gaming GamePlus Image Color GamrVisual Dark boost Input Select Shortcut 1. Kun näyttö on kytketty päälle, käännä OSD-valintaa vasemmalle/oikealle valikon valitsemiseksi, ja paina OK-painiketta OSD-valikon aktivoimiseksi. 2. Käännä OSD-valintaa vasemmalle/oikealle, jotta voit navigoida eri toimintojen läpi. Korosta haluttua asetusta ja paina OK-painiketta sen aktivoimiseksi.
3.1.2 1. Kuvaruutuvalikon johdanto Gaming (Pelaaminen) GameVisual Racing Mode Input Select HDMI-1 HDR OFF OD Gaming GamePlus Image Color GamrVisual Dark boost Input Select Shortcut • OD: Parantaa LCD-paneelin harmaustason vasteaikaa. Se sisältää 3 tilaa, mukaan lukien Extreme (Äärimmäinen), Normal (Normaali) ja OFF (POIS). • GamePlus: Katso lisätietoja 1.3.3 GamePlus-toiminto. • GameVisual: Katso lisätietoja 1.3.4 GameVisual -toiminto.
• Contrast (Kontrasti): Säätöalue on 0-100. • Variable Backlight (Vaihtuva taustavalo): Ottaa toiminnon käyttöön tai pois käytöstä vaihtuvalla taustavalolla. Vaihtoehdot ovat Fast (Nopea) (paras pelaamiseen), Medium (Keskitaso) ja Gradual (Asteittainen) (paras työkäyttöön tai tekstinkäsittelyyn). • Aspect Control (Kuvasuhteen hallinta): Säätää kuvasuhdetta kohtaan Full (Täysi) tai Aspect (Kuvasuhde). • Blue Light Filter (Sinisen valon suodatin) * Level 0 (Taso 0): Ei muutosta.
3. Color (Väri) GameVisual Racing Mode Input Select HDMI-1 HDR OFF Color Temp. Gaming Six-axis Saturation Image Color Gamma DP SDR YCbCr sRGB Gamma HDMI SDR YCbCr sRGB Gamma Input Select Shortcut 4. • Color Temp. (Värilämpötila): Sisältää 8-tilaa, mukaan lukien 4000K, 5000K, 6500K, 7500K , 8200K, 9300K, 10000K ja User Mode (Käyttäjätila). • Six-axis Saturation (Kuusiakselinen värikylläisyys): Säätää värikylläisyyttä väreille R, G, B, C, M, Y.
5. Shortcut (Oikopolku) GameVisual Racing Mode Input Select HDMI-1 HDR OFF Shortcut(Right) Gaming Shortcut(Left) Image Color Input Select Shortcut • Shortcut (Right) (Oikopolku (Oikea))/Shortcut (Left) (Oikopolku (Vasen)): Asettaa pikakuvaketoiminnot pikapainikkeille. Kun tietty toiminto on valittu tai aktivoitu, pikanäppäintä ei ehkä tueta. Saatavilla olevat toimintojen pikavalinnat: GamePlus, GameVisual, Brightness (Kirkkaus), Contrast (Kontrasti), Color Temp.
• 7. • Jos Aura Sync -toiminto on kytketty kohtaan ON (PÄÄLLÄ), Aura RGB -toiminto ei ole käytettävissä. • Katso lisätietoja kohdasta "3.2 Aura", miten Aura-valotehosteet muokataan tietokoneeltasi. LIGHT IN MOTION (VALO LIIKKEESSÄ): Valitsee valon kirkkaustason jalustassa. Säätöalue on “Level 0” (Taso 0) - “Level 3” (Taso 3).
Jos näyttö ei mene päälle sen jälkeen, kun se on ollut syvässä lepotilassa, tee yksi seuraavista: - Paina mitä tahansa painiketta näytössä sen herättämiseksi. - Ota Deep Sleep (Syvä lepotila) -toiminto pois käytöstä. • Key Lock (Näppäinlukko): Ota kaikki toimintopainikkeet pois käytöstä. Paina OK-painiketta oikealta yli viiden sekunnin ajan näppäinlukkotoiminnon peruuttamiseksi.
3.2 Aura Armoury Crate on ohjelmisto, joka ohjaa värikkäitä LED-valoja tuetuissa laitteissa, kuten näytöissä, emolevyissä, näytönohjaimissa, pöytäkoneissa jne. Auralla näissä laitteissa voidaan säätää RGB LEDien väriä ja valita eri valotehosteita. Voit myös korjata tai säätää LEDien väriä kalibroimalla ne. LiveDash OLED -paneelia hallitaan myös tällä ohjelmistolla. 1. Aktivoi Aura kytkemällä ON (PÄÄLLÄ) Aura Sync -toiminto OSD-valikossa.
3.3 Teknisten tietojen yhteenveto Paneelityyppi Paneelin koko Max.resoluutio Pikselien korkeus Kirkkaus Lämpötila (käyttö) TFT LCD 32,0" (16:9, 81,28 cm) laajakuva 3840 x 2160 0,1845 mm 500 cd/m2 (Tyyp./SDR päällä), 1400 cd/m2 (tyyp./HDR päällä) 1.000:1 400.000:1 178˚/178˚ 1073,7 M (10-bittinen) DCI-P3 98% 4 ms (harmaasta harmaaseen) 8 värilämpötilaa HDMI v2.0b, DisplayPort v1.4 Kyllä Tulosuunta x 3 (USB 3.0 x 2, USB 2.
Vaatimustenmukaisuus ja standardit cTUVus, CB, CE, FCC, CCC, BSMI, CU, VCCI, J-MOSS, RoHS, WEEE, PSE, KCC, ICES-3, ErP, CEL, ISO 9241-307, UkrSEPRO, RCM, PC Recycle, e-Standby, TUV Flicker Free, TUV Low Blue Light, PSB, CEC, Windows 7 & 10 WHQL *Kaikki tiedot voivat muuttua ilman erillistä ilmoitusta. **Mittaa ruudun kirkkautta 200 cd/m2 ilman ääni/USB/kortinlukija-liitäntää.
3.
3.5 Vianetsintä (FAQ) Ongelma Virran LED-valo ei pala Virran LED palaa oranssina, eikä näytössä näy kuvaa Näytön kuva on liian vaalea tai tumma Näytön kuva hyppii tai kuvassa esiintyy aaltokuvioita Näytön kuvassa on värivirheitä (valkoinen ei näytä valkoiselta) Ei ääntä, tai äänen taso on liian matala HDR-sisältö ei näy kunnolla LiveDash OLED -paneeli ei ole päällä 3-12 Mahdollinen ratkaisu • Paina mitä tahansa painiketta tarkistaaksesi, onko näyttö PÄÄLLÄ -tilassa.
3.6 Tuetut käyttötilat Resoluutiotaajuus HDMI DisplayPort 640 x 480 800 x 600 1024 x 768 1920 x 1080 2560 x 1440 2560 x 1440 2560 x 1440 3840 x 2160 3840 x 2160 3840 x 2160 3840 x 2160 3840 x 2160 3840 x 2160 3840 x 2160 Virkistystaajuus (Hz) 59,9 60,3 60 60 120 144 60 - Virkistystaajuus (Hz) 60 60 60 144 144 24 30 60 72 96 120 144 Kun näyttö toimii videotilassa (eli ei näytä tietoja) HDMI-liitäntää käyttäen, seuraavia teräväpiirtotiloja tuetaan vakiopiirtoterävyyden lisäksi.
3-14 Kappale 3: Kuvaruutu (OSD) -valikko
ASUS PG32UQX-sarjan LCD-näyttö 3-15
3-16 Kappale 3: Kuvaruutu (OSD) -valikko