Prvé vydanie Júl 2019 Autorské práva © 2019 ASUSTeK COMPUTER INC. Všetky práva vyhradené. Žiadna časť tohto návodu (vrátane produktov a softvéru, ktoré sú v ňom opísané) sa nemôže reprodukovať, prenášať, prepisovať, ukladať do vyhľadávacieho systému alebo prekladať do akéhokoľvek jazyka akýmkoľvek spôsobom (okrem uchovávania dokumentácie kupujúcim na účely zálohovania) bez výslovného písomného povolenia spoločnosti ASUSTeK COMPUTER INC. („ASUS“).
Obsah Oznámenia.................................................................................................... iv Informácie týkajúce sa bezpečnosti........................................................... v Starostlivosť a čistenie............................................................................... vi Takeback Services...................................................................................... vii 1. kapitola: Predstavenie výrobku 1.1 Vitajte!..............................
Oznámenia Vyhlásenie Federal Communications Commission Toto zariadenie vyhovuje článku 15 predpisov FCC. Musí fungovať za týchto dvoch podmienok: • Toto zariadenie nesmie spôsobovať škodlivé rušenie. • Toto zariadenie musí absorbovať akékoľvek rušenie, vrátane rušenia, ktoré môže spôsobiť nežiaducu činnosť zariadenia. Zariadenie bolo otestované a je v súlade s obmedzeniami pre digitálne zariadenie triedy B podľa časti 15 pravidiel komisie FCC.
Informácie týkajúce sa bezpečnosti • Pred inštaláciou monitora si pozorne prečítajte všetku dokumentáciu, ktorá bola priložená. • V rámci prevencie pred rizikom požiaru alebo úrazu elektrickým prúdom nevystavujte monitor pôsobeniu dažďa ani vlhka. • Nikdy sa nepokúšajte otvoriť kryt monitora. V monitore je prítomné nebezpečné vysoké napätie, ktoré môže spôsobiť vážny úraz. • Ak je zdroj napájania poškodený, nepokúšajte sa ho sami opraviť.
Starostlivosť a čistenie • Pred nadvihnutím alebo zmenou polohy monitora je vhodné odpojiť káble a napájaciu šnúru. Pri nastavovaní polohy monitora dodržiavajte správne techniky zdvíhania. Pri zdvíhaní alebo prenášaní držte monitor za hrany. Nezdvíhajte obrazovku za stojan ani kábel. • Čistenie. Monitor vypnite a odpojte napájací kábel. Povrch monitora čistite mäkkou tkaninou, ktorá nepúšťa vlákna. Odolné škvrny možno vyčistiť navlhčenou handričkou s jemným čistiacim prostriedkom.
Kde nájdete ďalšie informácie Ďalšie informácie a aktualizácie k výrobku a softvéru nájdete na nasledujúcich miestach. 1. Webové stránky spoločnosti ASUS Celosvetová webová stránka spoločnosti ASUS poskytuje aktualizované informácie o hardvérových a softvérových produktoch ASUS. Pozrite stránku http://www.asus.com. 2. Voliteľná dokumentácia K výrobku môže byť priložená voliteľná dokumentácia, ktorú mohol pridať predajca. Tieto dokumenty nie sú súčasť štandardného balenia.
viii
1.1 Vitajte! Ďakujeme, že ste si zakúpili herný monitor ROG! Najnovší širokouhlý LCD monitor od spoločnosti ASUS poskytuje širšie, jasnejšie a krištáľovo čisté zobrazenie a okrem toho je vybavený funkciami, ktoré vylepšujú pozeranie. S týmito funkciami si môžete vychutnať praktické a lahodné vizuálne zážitky, ktoré vám monitor prináša! 1.
1.3 Predstavenie monitora 1.3.1 Pohľad spredu 1 2 3 4 5 6 1. 5-smerové tlačidlo ( ) • Otvára ponuku OSD. Slúži na výber položky v ponuke na obrazovke. • Zvýšenie alebo zníženie hodnôt alebo presunutie voľby nahor/nadol/ doľava/doprava. • Slúži na altivovanie ponuky na obrazovke, keď monitor prejde do pohotovostného režimu. 2. Tlačidlo klávesovej skratky 1 • Klávesová skratka Input Select (Výber vstupu). • Slúži na altivovanie ponuky na obrazovke, keď monitor prejde do pohotovostného režimu. 3.
6. Indikátor napájania • Význam farieb indikátora napájania je uvedený v tabuľke. Stav Popis Biela ZAPNÚŤ Bliká jantárová Uvedenie do pohotovostného režimu Jantárová Pohotovostný režim/Žiadny signál VYPNÚŤ VYPNÚŤ Červená Zelená G-SYNC HDR 1.3.2 Pohľad zozadu 11 1 1. 2. 2 3 4 5 6 7 8 9 10 Výstupný port S/PDIF. Tento port je určený na výstup zvukového signálu S/PDIF. Porty HDMI. Tieto porty slúžia na pripojenie zariadenia kompatibilného s rozhraním HDMI. 3. DisplayPort.
9. Prepínač napájania. Stlačením zapnete/vypnete napájanie. 10. Zásuvka na zámok Kensington. 11. Ovládacie tlačidlá. 1.3.3 Diaľkové ovládanie 1 3 2 ENTER 4 5 8 1. 6 7 Tlačidlo Zapnúť/Vypnúť • Slúži na zapnutie/vypnutie monitora. 2. Tlačidlo Input Select (Výber vstupu): • Slúži na voľbu dostupného zdroja vstupu. Stlačením tlačidla (tlačidlo Výber vstupu) zobrazíte signály DisplayPort, HDMI-1, HDMI-2, HDMI-3, HDMI-4 po pripojení kábla DisplayPort/HDMI k monitoru. 1-4 1.
3. Smerové tlačidlá so šípkou • Slúži na aktivovanie ponuky na obrazovke. • Zvýšenie alebo zníženie hodnôt alebo presunutie voľby nahor/nadol/ doľava/doprava. 4. Tlaeidlo ENTER • Slúži na aktivovanie ponuky na obrazovke. • Slúži na výber položky v ponuke na obrazovke. 5. Tlačidlo Skončiť • Slúži na zatvorenie ponuky na obrazovke. • Stlačením a podržaním po dobu 5 sekúnd zapína a vypína funkciu Key Lock (Zámku tlačidiel). 6. Tlačidlo klávesovej skratky 1 • Predvolené: Brightness (Jas).
1-6 1.
2.1 Odpojenie podstavca (len pre montáž na nástenný držiak VESA) Odpojiteľný podstavec tohto monitora je špeciálne navrhnutý pre nástenný držiak VESA. Odpojenie podstavca: 1. Monitor máte položený na stole obrazovkou nadol. 2. Pomocou šesťhranného kľúča uvoľnite štyri skrutky na zadnej strane monitora a odpojte podstavec. Odporúčame zakryť povrch stola mäkkou látkou, aby sa monitor nepoškodil. • Súprava nástenného držiaka VESA (400 x 400 mm) sa kupuje samostatne.
2.2 Usporiadanie káblov Pomocou úchytky na usporiadanie káblov môžete usporiadať káble. 2.3 Inštalácia projektora loga Aura Sync ROG Priskrutkujte projektor loga Aura Sync ROG k zadnej strane monitora a zapojte druhý koniec do portu mini-USB na monitore. 3 2-2 2 1 2.
2.4 Zapojenie káblov Pripojte káble podľa nasledujúcich pokynov: Len servisný  • Zapojenie napájacieho kábla: Zapojte pevne jeden koniec napájacieho kábla do portu vstupu stroedavého napätia, druhý koniec zapojte do elektrickej zásuvky. • Pripojenie kábla rozhrania DisplayPort/HDMI: • a. Zapojte jeden koniec kábla rozhrania DisplayPort/HDMI do portu DisplayPort/HDMI na monitore. b. Zapojte druhý koniec kábla rozhrania DisplayPort/HDMI do portu DisplayPort/HDMI na počítači.
2-4 2.
3.1 OSD (Ponuka na obrazovke) 3.1.1 Ako prekonfigurovať Scenery Mode GameVisual HDMI-1 Input Select Refresh Rate 60 Hz Aura RGB OFF Over Clocking Over Clocking Max Refresh Rate Sound Color Image Input Select System Setup ENTER BACK EXIT 1. Stlačením 5-smerového tlačidla ( ) na monitore alebo smerových tlačidiel so šípkou/tlačidla ENTER na diaľkovom ovládaní aktivujte ponuku na obrazovke. 2.
3.1.2 1. Predstavenie funkcií v ponuke na obrazovke Over Clocking Táto funkcia umožňuje nastaviť obnovovaciu frekvenciu. Scenery Mode GameVisual HDMI-1 Input Select Refresh Rate 60 Hz Aura RGB OFF Over Clocking Over Clocking Max Refresh Rate Sound Color Image Input Select System Setup ENTER • 2. BACK EXIT Max Refresh Rate (Max. obnovovacia frekvencia): Umožňuje vybrať maximálnu obnovovaciu frekvenciu 144 Hz (len pre vstup DisplayPort).
• Mute (Stlmiť): Zapína a vypína zvuk monitora. • Audio Output (Výstup zvuku): Umožňuje nastaviť cestu výstupu zvuku: Internal Speaker (Interný reproduktor) a SPDIF. Keď je zvolená možnosť SPDIF, položky Volume (Hlasitosť) a AudioWizard nie sú k dispozícii. • AudioWizard: Obsahuje 3 režimy zvuku – Gaming Mode (Herný režim), Movie Mode (Filmový režim) a OFF (VYPNUTÉ). Color (Farba) V tejto ponuke môžete urobiť nastavenie týkajúce sa farieb. 3.
4. Image (Obraz) V tejto ponuke môžete urobiť nastavenie týkajúce sa obrazu. Scenery Mode GameVisual HDMI-1 Input Select Refresh Rate 60 Hz Aura RGB OFF Image Over Clocking OD GameVisual Sound Color Blue Light Filter Dark Boost Variable Backlight Image Auto Black Level Aspect Control Input Select System Setup ENTER 3-4 BACK EXIT • OD: Vylepšuje čas odozvy odtieňov sivej panela LCD. Obsahuje 3 režimy: Extreme (Extrémny), Normal (Normálny) a OFF (VYPNUTÉ).
• Blue Light Filter (Filter modrého svetla): * Level 0 (Úroveň 0): Žiadna zmena. * Level 1~4 (Úroveň 1~4): Čím vyššia úroveň, tým menej modrého svetla sa rozptyľuje. Keď je funkcia Blue Light Filter (Filter modrého svetla) aktivovaná, automaticky sa importujú predvolené nastavenia Racing Mode (Režim Preteky). Od úrovne 1 po úroveň 3 sa dá funkcia Brightness (Jas) konfigurovať. Úroveň 4 je optimalizované nastavenie. Je v súlade s certifikátom TUV redukcia modrého svetla.
5. Input Select (Výber vstupu) V tejto funkcii môžete vybrať požadovaný vstupný zdroj a zapínať alebo vypínať funkciu automatickej zmeny vstupu. Keď je aktivovaná možnosť Input Auto Switch (Automatické prepínanie vstupu), monitor 2 minúty vyhľadáva dostupný zdroj vstupu. Ak sa nezistí žiadny zdroj vstupu, deaktivujte túto funkciu a vyberte ho ručne.
• • Aura RGB: V tejto funkcii môžete pre monitor vybrať svetelný efekt Aura RGB a zmeniť nastavenia sveteleného efektu. Ak chcete svetelný efekt Aura RGB vypnúť, vyberte možnosť „OFF“ (VYPNUTÉ). • Ak je funkcia Aura Sync zapnutá, funkcia Aura RGB nebude k dispozícii. • Informácie o prispôsobení svetelných efektov Aura z počítača nájdete v časti 3.2. GamePlus: Funkcia GamePlus poskytuje súpravu nástrojov a vytvára lepšie herné prostredie pre používateľov pri hraní rozličných typov hier.
• Information (Informácie): Zobrazuje informácie o monitore. • DisplayPort Deep Sleep (Režim hlbokého spánku na porte DisplayPort): uvedie port DisplayPort do režimu dlhodobého spánku. • HDMI Deep Sleep (Režim hlbokého spánku na porte HDMI): uvedie port HDMI do režimu dlhodobého spánku. Ak sa monitor nemôže prebudiť z režimu dlhodobého spánku, urobte niečo z nasledujúceho: – Stlačením ktoréhokoľvek tlačidla na monitore (okrem tlačidla napájania) prebuďte monitor.
3.2 ASUS Aura AURA je softvérový program, ktorý riadi farebné LED svetlá na podporovaných zariadeniach, ako sú napríklad monitory, základné dosky, grafické karty, stolné počítača atď. Aplikácia Aura vám umožňuje nastaviť farbu RGB LED svetiel na týchto zariadeniach a vybrať rozličné svetelné efekty. Kalibráciou môžete aj opraviť alebo nastaviť farbu LED svetiel. Aktivovanie aplikácie Aura: 1. Zapnite funkciu Aura Sync v ponuke na obrazovke. 2. Prepojte port USB 3.
3.3 3-10 Prehľad technických údajov Typ panela TFT LCD Veľkosť obrazovky 65-palcová (16:9, 64,53-palcová) širokouhlá obrazovka Maximálne rozlíšenie 3840 x 2160 Rozstup bodov 0,372 x 0,372 mm Jas (typicky) 1000 cd/m2 (špička/HDR zapnuté) Pomer kontrastu (typicky) 4000:1 Zobrazovací uhol (vodorovne/ zvisle) CR > 10 178˚/178˚ Počet zobrazovaných farieb 16,7 M Čas odozvy 4 ms (zo sivej na sivú) Výber teploty farieb 4 teploty farieb Analógový vstup Nie Digitálny vstup 1x DisplayPort v1.
Príslušenstvo Stručná úvodná príručka, záručný list, diaľkové ovládanie, napájací kábel, kábel DP, kábel HDMI, kábel USB, projektor loga Aura Sync ROG, úchytka na usporiadanie káblov, šesťhranný kľúč, správa o kalibrácii Súlad a normy UL/cUL, CB, CE, ErP, FCC, CCC, BSMI, CU, C-Tick, VCCI, PSE, CEL Level 3, J-MOSS, RoHS, WEEE, Windows 7 a 8.1 a 10 WHQL, KCC, E-STANDBY, TUV-Flicker Free, TUV Low Blue Light, UkrSEPRO, RCM, MEPS *Technické údaje sa môžu zmeniť bez predchádzajúceho oznámenia.
ASUS PG65UQ Outline Dimension *Unit:mm(inch) 3.00 [0.12] 714.24 [28.12] 3.00 [0.12] AA-CENTER 11.90 [0.47] 1448.08 [57.01] 1428.48 [56.24] -Active Area 74.71 [2.94] 1100.84 [43.34] 87.20 [3.43] 389.82 [15.35] 10.90 [0.43] 148.10 [5.83] 316.73 [12.47] 3.00 [0.12] 400.00 [15.75] M6*4-Depth 15 400.00 [15.75] Wall mount Keep out area 3. kapitola: Všeobecné pokyny 3-12 803.52 [31.63] -Active Area 826.72 [32.55] 863.83 [34.01] 946.90 [37.28] 120.18 [4.73] 386.94 [15.23] Vonkajšie rozmery 3.
3.5 Riešenie problémov (Najčastejšie otázky) Problém LED indikátor napájania nie je ZAPNUTÝ Možné riešenie • Stlačením tlačidla napájania skontrolujte, či je monitor ZAPNUTÝ. • Skontrolujte, či je napájací kábel správne pripojený k monitoru a elektrickej zásuvke. LED inikátor napájania svieti nabielo, ale na obrazovke nie je žiadny obraz • Skontrolujte, či sú monitor aj počítač ZAPNUTÉ. • Uistite sa, či je signálny kábel správne pripojený k monitoru a počítaču.
3.6 Podporovaný prevádzkový režim Vstup HDMI Frekvencia rozlíšenia Obnovovacia frekvencia 640 x 480 800 x 600 1024 x 768 1280 x 720 1920 x 1080 60Hz 60Hz 60Hz 60Hz 60Hz 3840 x 2160 60Hz Poznámka: Nepodporuje prekladané riadkovanie a farebný gamut YUV420. Keď pripájate k zariadeniu XBOX cez port HDMI, podporvané je rozlíšenie 1080p/120 Hz a . 1440p/60 Hz.
Vstup DisplayPort – Pretaktovanie Frekvencia rozlíšenia Obnovovacia frekvencia 3840 x 2160 144Hz Poznámka: Nepodporuje prekladané riadkovanie. Pretože obsah HDR je zameraný na rozlíšenie 4K (3840 x 2160), pri inom rozlíšení sa môžu vyskytnúť nezvyčajné obrazy. Počkajte, kým sa inicializuje funkcia Pretaktovanie. Proces môže trvať menej než 40 sekúnd. Grafické procesory podporujúce pretaktovanie: Je potrebná grafická karta NVIDIA Pascal GPU, ako napríklad GTX1070, GTX1080 a GTX1080 Ti alebo lepšia.
3-16 3.