Erste Ausgabe November 2020 Copyright © 2020 ASUSTeK COMPUTER INC. Alle Rechte vorbehalten. Kein Teil dieser Anleitung, inklusive der hierin beschriebenen Produkte und Software, darf ohne ausdrückliche schriftliche Genehmigung der ASUSTeK COMPUTER INC. („ASUS“) auf irgendeine Weise oder Form reproduziert, übertragen, transkribiert, in Abrufsysteme gespeichert oder in eine andere Sprache übersetzt werden, außer in Form einer im Besitz des Käufers verbleibenden Sicherheitskopie.
Inhaltsverzeichnis Hinweise....................................................................................................... iv Hinweise zu Ihrer Sicherheit........................................................................ v Pflegen & Reinigen...................................................................................... vi Rücknahmeservices................................................................................... vii Produktinformationen für das EU Energielabel..................
Hinweise Erklärung der Federal Communications Commission Dieses Gerät erfüllt Teil 15 der FCC-Regularien. Der Betrieb unterliegt den folgenden beiden Voraussetzungen: • Dieses Gerät darf keine Funkstörungen verursachen, und • Dieses Gerät muss jegliche empfangenen Funkstörungen hinnehmen, einschließlich Störungen, die zu unbeabsichtigtem Betrieb führen können. Dieses Gerät wurde getestet und als mit den Grenzwerten für Digitalgeräte der Klasse B gemäß Teil 15 der FCC-Regularien übereinstimmend befunden.
Hinweise zu Ihrer Sicherheit • Lesen Sie sorgfältig die mitgelieferte Dokumentation durch, bevor Sie beginnen, den Monitor einzurichten. • Setzen Sie den Monitor weder Regen noch Feuchtigkeit aus, um einen Brand oder elektrischen Schlag zu vermeiden. • Versuchen Sie niemals das Monitorgehäuse zu öffnen. Die gefährliche Hochspannung innerhalb des Monitors kann ernsthafte Verletzungen verursachen. • Falls das Netzteil defekt ist, versuchen Sie es nicht in eigener Regie zu reparieren.
• Das Netzteil ist nur für diesen Monitor geeignet, nicht für andere Zwecke verwenden. Ihr Gerät nutzt eine der folgenden Stromversorgungen: - Hersteller: Delta Electronics Inc., Modell: ADP-90LE B Das Symbol mit einer durchgestrichenen Abfalltonne auf Rädern bedeutet, dass das Produkt (elektrisches und elektronisches Gerät oder quecksilberhaltige Knopfzelle) nicht mit dem Hausmüll zusammen entsorgt werden darf. Bitte schauen Sie nach örtlichen Vorschriften zur Entsorgung elektronischer Geräte.
Darstellungssystematik in dieser Anleitung WARNUNG: Hier finden Sie wichtige Hinweise, um Verletzungen während des Ausführens einer Aufgabe zu vermeiden. VORSICHT: Hier finden Sie wichtige Hinweise, um Schäden an Komponenten während des Ausführens einer Aufgabe zu vermeiden. WICHTIG: Hier finden Sie wichtige Hinweise, die Sie beachten MÜSSEN, um eine Aufgabe fertig zu stellen. HINWEIS: Hier finden Sie Tipps und zusätzliche Informationen, die das Ausführen einer Aufgabe erleichtern.
viii
1.1 Willkommen! Vielen Dank für den Kauf des ROG Gaming Monitors! Der aktuellste Breitbild-LCD-Monitor von ASUS bietet ein breiteres, helleres und kristallklares Bild sowie eine Vielzahl weiterer Funktionen, welche die Arbeit mit diesem Produkt zum Vergnügen machen. Durch diese Funktionen können Sie die Bequemlichkeit und das wunderbare visuelle Erlebnis des Monitors genießen! 1.
1.3 Einführung zum Monitor 1.3.1 Frontansicht/Seitenansicht 1 2 3 4 5 1. ( 5-Wege) Taste: • Zum Einschalten des OSD-Menüs. Bestätigt die ausgewählte OSDMenüoption. • Erhöht/verringert Werte und navigiert bei der Auswahl nach oben/unten/ links/rechts. • Aktiviert das OSD-Menü, wenn der Monitor den Standbymodus aufruft oder die “KEIN SIGNAL” Meldung angezeigt wird. 2. Taste • Beendet die OSD-Menüoption.
• Aktiviert das OSD-Menü, wenn der Monitor den Standbymodus aufruft oder die “KEIN SIGNAL” Meldung angezeigt wird. 5. Stromschalter/Betriebsanzeige • Mit diese Taste schalten Sie den Bildschirm ein/aus. • Die folgende Tabelle zeigt die Bedeutung der Farben der Betriebsanzeige. 1.3.2 Status Beschreibung Weiß Gelb AUS EIN Standby-Modus/Kein Signal AUS Ansicht von hinten 10 1. Schlitz für Kensington-Schloss. 2. DC-IN-Port. Hier schließen Sie das Netzkabel an. 3. HDMI-1 Anschluss.
1.3.3 GamePlus Funktion GamePlus Funktion bietet ein Toolkit und erzeugt eine bessere Spielumgebung, wenn unterschiedliche Arten von Spielen gespielt werden. Bei der FadenkreuzÜberlagerung mit 6 verschiedenen Fadenkreuzoptionen können Sie dasjenige auswählen, das am besten zu Ihrem Spiel passt. Es gibt auch einen BildschirmTimer, den Sie links auf dem Bildschirm platzieren können, so dass Sie die absolvierte Spielzeit im Auge behalten können.
1.3.4 GameVisual-Funktion Die GameVisual-Funktion ermöglicht Ihnen die komfortable Auswahl unterschiedlicher Bildmodi. Aktivierung von GameVisual: 1. Drücken Sie auf die GameVisual Verknüpfungstaste 2. Bewegen Sie die ( Einstellung zu markieren. 3. Drücken Sie auf die um sie zu aktivieren. 4. Um das Menü zu beenden, bewegen Sie die ( ) Taste nach oben/unten, um eine gewünschte ) Taste oder bewegen Sie die Taste nach rechts, ( ) Taste nach links.
1.3.5 • Andere Funktion(en) HDR Der Monitor unterstützt das HDR Format. Beim Erkennen von HDR-Inhalten wird eine „HDR EIN“ Meldung erscheinen. Bei der Anzeige von HDR-Inhalten sind die folgenden Funktionen nicht verfügbar: ELMB Sync, Scharfschütze, GameVisual, Shadow Boost, Helligkeit, Kontrast, ASCR, Kontrollen, Blaulichtfilter, Farbtemp., Gamma, Sättigung, Dynamisches Dimmen (auf EIN gestellt).
2.1 Anbringen des Monitorarms/- fußes 1. Bringen Sie den Arm am Fuß an. 2 Sichern Sie den Monitorfuß mit Hilfe der mitgelieferten Schraube am Halter. Wir empfehlen Ihnen ein weiches Tuch auf den Tisch zu legen, um Schäden an dem Monitor zu vermeiden. Basis-Schraubengröße: M6 x 15 mm. 2.2 Kabelverwaltung Sie können die Kabel mit Hilfe der Abdeckung des Ein-/Ausgangsports organisieren.
2.3 Anpassen des Bildschirms • Schauen Sie bitte auf die volle Fläche des Bildschirms und passen die Position des Bildschirms an, um einen optimalen Blickwinkel zu erhalten. • Halten Sie den Monitorfuß fest, damit der Monitor beim Anpassen des Blickwinkels nicht umkippt. • Der empfohlene Einstellungswinkel ist +20˚ bis -5˚(für Kippen)/ +25˚ bis -25˚(für Drehen)/ +100 mm (für Höhenanpassung)/ 90˚ (für Hochformat).
2.4 Abnehmen des Halters (für VESAWandmontage) Der Halter des Monitors kann zur VESA-Wandmontage abgenommen werden. So nehmen Sie Arm/Basis ab: 1. Legen Sie den Monitor mit dem Bildschirm nach unten zeigend auf einen Tisch. 2. Entfernen Sie die Abdeckungen, an denen sich der Monitor und der Arm treffen. 3. Platzieren Sie den Monitor mit der Bildschirmseite nach unten auf einem Tisch. 1 2 3 4 Wir empfehlen Ihnen ein weiches Tuch auf den Tisch zu legen, um Schäden an dem Monitor zu vermeiden.
2.5 Anschließen der Kabel Schließen Sie die Kabel gemäß den nachstehenden Anweisungen an: Nur für Wartung • • So schließen Sie das Netzkabel an: a. Schließen Sie das Netzteil sicher am DC-Eingang des Monitors an. b. Verbinden Sie ein Ende des Netzkabels mit dem Netzteil und das andere Ende mit einer Steckdose. So schließen Sie das DisplayPort/HDMI an: a. Verbinden Sie das eine Ende des DisplayPort/HDMI-Kabels mit dem DisplayPort/HDMI-Anschluss des Monitors. b.
3.1 Bildschirmmenü (OSD-Menü) 3.1.1 Bedienungsvorgang DisplayPort 2560x1440@ 60Hz Rennmodus Aura OFF ROG Strix XG27AQ HDR OFF Gaming Übertaktung Bildeinrichtung OD Farbe Adaptive-Sync (DP) Eingangswahl ELMB SYNC Lichteffekt GamePlus MyFavorite GameVisual System-Einstellungen Shadow Boost BACK MOVE/ENTER 1. Drücken Sie die 2. Drücken Sie die ( ) Taste nach oben/unten, um durch die Funktionen zu steuern.
• Max. Aktualiserungsrate: Ermöglicht Ihnen die Auswahl einer maximalen Aktualisierungsrate von 170Hz (Nur für DisplayPort Eingang). Drücken Sie nach der Auswahl auf die aktivieren. • ( ) Taste, um die Einstellung zu • Übertaktung kann zu Bildschirmflimmern führen. Um solche Effekte zu reduzieren, trennen Sie das DisplayPort Kabel und verwenden Sie das Monitor OSD-Menü, um es erneut mit einem sichereren Max. Aktualisierungsrate zu versuchen. • Diese Funktion ist nur verfügbar, wenn DisplayPort Ver.
2. Bildeinrichtung DisplayPort 2560x1440@ 60Hz Rennmodus Aura OFF ROG Strix XG27AQ HDR OFF Gaming Helligkeit 100 Bildeinrichtung Kontrast 80 Farbe HDR Eingangswahl Dynamisches Dimmen Lichteffekt ASCR MyFavorite Kontrollen System-Einstellungen Blaulichtfilter MOVE/ENTER BACK • Helligkeit: Der Einstellbereich reicht hier von 0 bis 100. • Kontrast: Der Einstellbereich reicht hier von 0 bis 100. • HDR: Bietet zwei HDR Modi.
3. • Um die Belastung und Trockenheit in ihren Augen zu minimieren, sollten Sie ihre Augen regelmäßig ausruhen, indem sie auf weit entfernte Gegenstände blicken. • Augenübungen können bei der Verringerung der Augenbelastung helfen. Wiederholen Sie diese Übungen regelmäßig. Wenn die Augenbelastung weiter anhält, suchen Sie bitte einen Arzt auf. Augenübungen: (1) Schauen Sie wiederholt nach oben und unten (2) Rollen Sie langsam Ihre Augen (3) Bewegen Sie Ihre Augen diagonal.
5. Lichteffekt DisplayPort 2560x1440@ 60Hz Rennmodus Aura OFF ROG Strix XG27AQ HDR OFF Gaming Aura Sync Bildeinrichtung Aura RGB Farbe Eingangswahl Lichteffekt MyFavorite System-Einstellungen BACK MOVE/ENTER EXIT • Aura Sync: Ermöglicht es Ihnen, die Aura Sync Funktion ein- oder auszuschalten, die den Aura RGB Lichteffekt auf allen unterstützten Geräten synchronisiert.
7. System-Einstellungen DisplayPort 2560x1440@ 60Hz Rennmodus Aura OFF ROG Strix XG27AQ HDR OFF Gaming Sprache Bildeinrichtung Klang Farbe USB Hub Eingangswahl Betriebsanzeige Lichteffekt Ein-/Austaste-Sperre MyFavorite Tastensperre System-Einstellungen OSD-Einstellungen DisplayPort Ver.
3.2 Aura Armoury Crate ist ein Softwareprogramm, das die bunten LEDs auf unterstützten Geräten wie Monitoren, Motherboards, Grafikkarten, Desktop-PCs usw. steuert. Aura ermöglicht es Ihnen, die Farbe der RGB-LEDs an diesen Geräten anzupassen und verschiedene Lichteffekte auszuwählen. Sie können auch die Farbe der LEDs korrigieren oder anpassen, indem Sie sie kalibrieren. Um Aura zu aktivieren: 1. Schalten Sie die Aura Sync Funktion im OSD-Menü EIN. 2. Verbinden Sie den USB 3.
3.3 Technische Daten Modell Bildschirmtyp Bildschirmgröße Max. Auflösung Pixelabstand Helligkeit (i.d.R.) Kontrastverhältnis (i.d.R.) Betrachtungswinkel (H/V) CR>10 Anzeigefarben Ansprechzeit Farbtemperaturauswahl Analoger Eingang Digitaleingang Kopfhörerbuchse Audioeingang Lautsprecher (Integriert) USB 3.
Zubehör Konformität und Normen Schnellstartanleitung, Garantiekarte, Netzteil, Netzkabel, DP Kabel, HDMI Kabel, USB Kabel, Farbkalibrierungstestbericht, Eingangs-/ Ausgangsanschluss Abdeckung, ROG-Aufkleber CB, CE, CU, CCC, cTUVus, MEPS, FCC, RCM, BSMI, VCCI, RoHS, WEEE, J-MOSS, ErP, PSE, CEL, Windows 7 WHQL, Windows 10 WHQL, KCC, E-Standby, TUV-Flicker Free, TUV-Low Blue Light, UkrSEPRO, ICES-3, CEC *Die technischen Daten können ohne Ankündigung geändert werden.
ASUS XG27AQ Outline Dimension *Unit: mm(inch) 20.0 5.0 Swivel: 298,4 [11.7] 25 Degree 611,2 [24.1] 596,7 [23.5]-Active area 25.00 AA Center 560,5 [22.1] 507,5 [20.0] 366,5 [14.4] 255,0 [10.0] Pivot: 90 Degree(clockwise) 90 .0 134,3 [5.3] 335,7 [13.2]-Active area 35,1 [1.4] 85,4 [3.4] 117,0 [4.6] 100,0 [3.9] 84,0 [3.3] 117,0 [4.6] 100,0 [3.9] M4*4 Depth 10 Wall mount Keep out area Kapitel 3: Allgemeine Hinweise 3-10 Äußere Abmessungen 3.4 174,7 [6.9] 25.00 22,6 [0.9] 163,6 [6.
3.5 Fehlerbehebung (Häufig gestellte Fragen) Problem Mögliche Lösung Die Betriebs-LED leuchtet nicht • Drücken Sie die Taste, um zu überprüfen, ob der Monitor eingeschaltet ist. • Prüfen Sie, ob das Netzkabel richtig mit dem Monitor und der Steckdose verbunden ist. Die Betriebs-LED leuchtet weiß und • Prüfen Sie, ob der Monitor sowie der Computer kein Bild erscheint im normalen Betriebszustand ist. • Stellen Sie sicher, dass das Signalkabel richtig mit dem Monitor und dem Computer verbunden ist.
3.
Video-Timing Auflösung Frequenz HDMI DP 720x480P Aktualisierungsrate 59,94Hz Aktualisierungsrate Nicht unterstützt 60Hz 59,94Hz Nicht unterstützt 60Hz Nicht unterstützt 60Hz 59,94Hz 60Hz 59,94Hz 60Hz 59,94Hz 720x480P 1280x720P 1280x720P 1440x480P 1440x480P 1920x1080P 59,94Hz 1920x1080P 60Hz 60Hz 1920x1080P 120Hz 120Hz ROG Strix XG27AQ Serie Gaming LCD Monitor 3-13
3-14 Kapitel 3: Allgemeine Hinweise