Upgrade Guide

ManualsBrandsAsus ManualsGaming SeriesROG Zephyrus G15

Notebook PC Upgrade Guide

Removing the compartment cover

A. Loosen the Cover Screw without removing the screw from the

cover.

B. Remove the screw(s) from the Notebook PC’s compartment cover.

C. Pull out the compartment cover and remove it completely from

your Notebook PC.

E15023

Upgrade Guide

Cover Screw

Summary of content (6 pages)

PAGE 1
E15023 Upgrade Guide Removing the compartment cover A. Loosen the Cover Screw without removing the screw from the cover. B. Remove the screw(s) from the Notebook PC’s compartment cover. C. Pull out the compartment cover and remove it completely from your Notebook PC.
PAGE 2
To reattach the compartment cover: A. Align and reattach the cover of the compartment. B. Tighten the Cover Screw. C. Secure the cover using the screw(s) you removed earlier.
PAGE 3
Installing a RAM module Upgrade the memory capacity of your Notebook PC by installing a RAM (Random Access Memory) module in the memory module compartment. The following steps show you how to install a RAM module into your Notebook PC: WARNING! Disconnect all the connected peripherals, any telephone or telecommunication lines and power connector (such as external power supply, battery pack, etc.) before removing the compartment cover.
PAGE 4
A. Remove the compartment cover. NOTE: For more details, refer to the Removing the compartment cover section in this manual. B. Align and insert the RAM module into the RAM module slot. C. Push down the RAM module until it clicks in place.
PAGE 5
Installing an M.2 card Refer to the following steps when installing a compatible M.2 card in your Notebook PC: IMPORTANT! Purchase your M.2 card from authorized retailers of this Notebook PC to ensure maximum compatibility and reliability. WARNING! Disconnect all the connected peripherals, any telephone or telecommunication lines and power connector (such as external power supply, battery pack, etc.) before removing the compartment cover. NOTE: • The appearance of your Notebook PC’s bottom side and M.
PAGE 6
A. Remove the compartment cover. NOTE: For more details, refer to the Removing the compartment cover section in this manual. B. Insert the M.2 card into the wrapper in the orientation shown in the illustration below. C. Align and insert the M.2 card into the module slot. D. Secure the M.2 card in place using the bundled screw(s).