Quick Start Guide

ManualsBrandsASUS ManualsComputers & AccessoriesDual-Band Wireless Repeater

Placing your RP-AX56

Plug your RP-AX56 into a power outlet near

your router/AP.

Check the LEDs and see the LED explanations.

METHOD 1

Download the ASUS

Extender App

METHOD 2

Connect via WPS

Press the WPS button on your router/

A P.

Press the WPS button on your

RP-AX56 for more than two (2)

seconds until the LED starts to

blink blue.

RP-AX56

Dual-Band Wireless Repeater

Quick

Start Guide

Hardware Explanations

Button Explanations

RESET BUTTON

Reset the system to its factory default settings.

WPS BUTTON

Launch the WPS Wizard.

LAN PORT

Connect your PC to the LAN port with a network cable.

BEFORE SETUP

SETUP METHODS

WE SUGGEST…

Set up RP-AX56 as a repeater

Plug RP-AX56 into a power outlet.

The LED will start breathing white for 3 seconds while booting

up.

LAN port

LED

WPS button

reset button

LED Explanations

Repeater Mode

Status LED Behavior

Booting up Blinking White

Booting up complete (haven’t

connected to Router)

Solid Blue

Reset (use a pin to press the

reset button for 5 seconds)

Blinking Yellow

Rescue mode Solid Purple

Starting WPS Blinking Blue

Connected to the router with

Good Signal

Solid White

Conneccted to the router with

Weak Signal

Solid Yellow

No Signal Solid Red

AP mode (with wired

connection)

Solid White

AP mode (without wired

connection)

Solid Red

AiMesh Mode

Status LED Behavior

Booting up Blinking White

Booting up complete (not

connected to AiMesh Router)

Solid Blue

Reset (use a pin to press the

reset button for 5 seconds)

Blinking Yellow

Rescue mode Solid Purple

Connecting to the AiMesh Router Blinking Blue

Connected to the AiMesh Router

with Good Signal

Solid White

Connected to the AiMesh Router

with Weak Signal

Solid Yellow

No Signal Solid Red

Ethernet backhaul Solid White

Wait for the LED to ﬂash and turn solid blue,

indicating that your RP-AX56 is ready to connect

to your existing router/AP.

around

2 meters

If you would like to connect RP-AX56 to other WiFi networks excluding AiMesh-supported routers, please download the

ASUS Extender App.

1 2

E16563_RP-AX56_V1_QSG_1P.indd 1

2020/8/6 17:36:08

Summary of content (2 pages)

PAGE 1
Hardware Explanations 1 Plug RP-AX56 into a power outlet. LED Explanations 2 The LED will start breathing white for 3 seconds while booting up.
PAGE 2
SETUP METHODS Set up RP-AX56 as an AiMesh Node If you already have an AiMesh router and you are going to create an AiMesh system, please download and install ASUS Router App for RP-AX56 setup. Please select RP-AX56 as the AiMesh Node. METHOD Download the ASUS Router App TROUBLE SHOOTING If your AiMesh router cannot find RP-AX56 nearby or synchronization fails, please check followings and try again. a Plug RP-AX56 into a power outlet near your router/AP.