User guide

Chapter 2: Hardware setup2-18

2.6 Cable connections

• The bundled system cables are pre-connected before shipment. You do

not need to disconnect these cables unless you will remove pre-installed

components to install additional devices.

• Refer to Chapter 4 for detailed information on the connectors.

Standard cables connected to the motherboard

1. 24-pin ATX power connector (from power supply to motherboard)

2. 8-pin ATX 12V power connector (from power supply to motherboard)

3. System fan connector (from system fan to motherboard)

4. SATA conectors (system default; from motherboard to SATA devices)

5. USB connector (from motherboard to front I/O board)

6. System panel connectors (from motherboard to front I/O board)