User's Manual
Chapter 4: Motherboard information4-6
4. LAN controller setting (3-pin LAN_SW1, LAN_SW2)
These jumpers allow you to enable or disable the onboard Intel
®
Intel
82574LGigabit LAN controllers. Set to pins 1–2 to activate the Gigabit LAN
feature.
P8B-X/MR LAN setting
P8B-X/MR
5. Intel
®
C202 SATA port S/W RAID setting (3-pin RAID_SEL1)
This jumper allows you to select the Serial ATA RAID conguration utility to use
when you create disk arrays. Place the jumper caps on pins 1–2 if you want
to use the LSI Logic Embedded SATA RAID Setup Utility (default); otherwise,
place the jumper caps on pins 2–3 to use the Intel
®
Rapid Storage Techonology
(IRST).