RS160-E3/PS4 1U
1) 2) AMD Athlon Opteron Windows MS-DOS AMD Microsoft ©2006 RS160-E3/PS4 V1 T2320 2006 2 01
.......................................................................................................... 9 ........................................................................................................ 10 .................................................................... 10 1.1 1.2 1.3 ......................................................................................... 1-2 ............................................................................................. 1-3 .................
.................................................................................. 2-18 2.7.2 2.7.3 .......................................................................................... 2-19 3.1 3.2 3.3 ................................................................................................. 3-2 ................................................................................................. 3-2 ................................................................................. 3-3 3.4 ....
.4 5.4.1 Advanced menu ............................................................. 5-19 CPU Configuration ........................................... 5-19 5.4.2 5.4.3 Chipset Configuration .......................................... 5-21 Onboard Devices Configuration .................. 5-23 5.4.4 PCI 5.4.5 PCI PnP ................................................. 5-27 Power Configuration ............................................ 5-28 5.4.6 Hardware Monitor .......................................
7.2.1 7.2.2 ................................. 7-5 Red Hat Enterprise ver. 3.0 .................................. 7-7 ................................................................................. 7-9 7.3.1 7.3.2 Windows 2000 Server Red Hat Enterprise ver. 3.0 7.3 .......................................... 7-9 ................................ 7-10 7.4.2 7.4.3 ................................................................... 7-11 .................................................. 7-11 ............
IC RS160-E3/PS4 7
UPS IC 8
RS160-E3/PS4 RS160-E3/PS4 RS160-E3/PS4 Jumper BIOS BIOS RS160-E3/PS4 BIOS 9
1. http://tw.asus.com 2.
RS160-E3/PS4
1.
1.2 RS160-E3/PS4 Intel¤ Socket 604 1U PVL-D/1U/SCSI Xeon 1U PVL-D/1U/SCSI Intel E7520 MCH Intel ICH5R I/O Intel PXH Socket 604 Intel Xeon Xeon Paxille Intel EM64T EIST Hyper-Threading 8 240-pin DDR DDRII 400 MHz registred ECC 16GB Broadcom¤ BMC5721 Gigabit PCI-E 1.0a ATI RAGE-XL PCI-based VGA 8MB 1 64-bit/133MHz 3V PCI-X 1 64-bit/133MHz 3V PCI-X * 1 mini-PCI Adaptec AIC-7902W Ultra320 SCSI - 2 SCSI HostRAID 0 RAID 1 RAID 0+1 -Zero-Channel RAID 4 x 3.5 SCSI 1x 2 x USB 2.
1 x PS/2 1 x PS/2 1x 1 x VGA 2 x USB 2.0 2 x RJ-45 1x SCSI Web ASWM Automatic System Restart, ASR 650W 115V~230V 50Hz~60Hz 670mm x 448mm x 43.
1.3 RS160-E3/PS4 LED Location LED USB 1.6.1 SCSI USB 1.4 RS160-E3/PS4 2 3 1 4 10 5 6 1. 2. 3. PS/2 4. PS/2 5. USB2.0 6. COM1 PS/2 PS/2 RS160-E3/PS4 7 9 8 7. 8. LAN 2 Gibabit 9. LAN 1 Gigabit 10. 11.
1.5 RS160-E3/PS4 CPU 2 1 3 4 5 7 6 8 9 10 11 12 13 1. PCI 2. 3. PVL-D/1U/SCSI 4. 5. 6. x4 1-6 7. 8. SCSI 9. 10. 11. 12. 13.
1.6 LED LED 1.6.1 Location LAN2 LAN1 LED Location Location ASWM LAN1 LAN2 1.6.
1.6.
RS160-E3/PS4
2.1 2.1.1 1. 2. 3. 4. 2.1.2 1.
2.1.2 1. 2. 2.1.3 1. 2. 3.
2.2 CPU RS160-E2/CS3 PVL-D/1U/SCSI ZIF 604 Xeon TM L2 2M Dual-Core Paxville CPU(4MB L2 Cache) CPU1 CPU ® PVL-D/1U/SCSI CPU2 Intel Xeon PVL-D/1U/SCSI CPU Socket 604 Irwindale CPU (2MB L2 Cache) CPU CPU 1 2.2.1 1.
2. 3. 4.
2.2.2 1. CPU CPU CPU 2. 3. 1 2 2.2.3 CPU 1. CPU 2.
2.3 2.3.1 128 Pins 112 Pins DIMM_B4 ® PVL-D/1U/SCSI DDR Double Data Rate DIMM 184-pin registered ECC DDR DDR DIMM DIMM_A4 DIMM_B3 DIMM_A3 DIMM_B2 DIMM_A2 DIMM_B1 DIMM_A1 PVL-D/1U/SCSI 240-pin DDR2 DIMM sockets 2.3.2 256MB 512MB 1GB 2GB Registered ECC DDR2 DIMM 1. CL CAS-Latency 2. 2GB 3. 128MB 4.
2.3.3 1. DDR2 2. DDR2 3. DDR2 DDR2 DIMM DDR2 DIMM DDR DDR DDR2 DIMM 2.3.4 1. 2.
2.4 SCSI 1. 2. 3. 4.
5. SCSI SCSI 6. 7. 1~6 2-10 2.7.
2.6 2.6.1 RS160-E3/PS4 PCI-X PCI-X PCI-X 1. PCI-X 2. 3. 4.
5. PCI 6. PCI X 7. 8. 9.
2.6.3 1. BIOS BIOS 2. IRQ 3. IRQ 0 1 1 2 2 N/A 3* 11 4* 12 5* 13 COM1 COM 2 PCI 6 14 7* 15 8 3 CMOS/ 9* 4 PCI 10* 5 PCI 11* 6 12* 7 LPT 1 PCI PS/2 13 8 14* 9 IDE 15* 10 IDE * ICH5R IDE controller ICH5R SATA controller ICH5R SMBus controller ICH5R USB UHCI controller #1 ICH5R USB UHCI controller #2 ICH5R USB 2.
2.6 5 9 6 7 2 8 10 11 13 12 1 4 14 3 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14.
2.6.
2.6.
2.7 1. 2. 3. / 2.7.1 8 2 1. 2. 3. 1~2 1. 2.
2.7.2 1. 2.7 2. 3.
2.7.3 1. 2. 3. 4.
5. 6. LED 7. 8.
9. 4 10.
2-22
RS160-E3/ PS4
3.1 RS160-E3/PS4 8 80 3.2 1. 2. 3.
3.3 1. 1U 2. 1U 3. 4. 5. 6.
3.4 1. 2.
Jumper
4.
/ 1. 2. 3. 4. 5. CPU Sockets DDR2 DIMM sockets PCI/PCI-X slots Zero-Channel RAID socket Mini-PCI socket 4-2 4-2 4-2 4-2 4-2 1. 2. 3. 4. 5. 6. 7. 8. 9.
4.2 1.
2. CPU pin 3-pin FM_CPU1, FM_CPU2) 4-pin [1-2] CPU CPU_FAN1, CPU_FAN2 4-pin 33-pin [2-3] FM_CPU1 2 1 PWM ® PVL-D/1U/SCSI 3 2 DC mode (Default) FM_CPU2 PVL-D/1U/SCSI FM_CPU setting 3. USB PWM 3-pin USBPW12, USBPW34 +5V USB S1 +5VSB S3 S4 +5V 1. 3 2 2 1 DC mode (Default) USB USB [1-2] +5VSB 500mA/+5VSB 2. 3. +5VSB Windows 2000 Service Pack 4.
4. (3-pin KBPWR1) KBPWR [1-2] +5VSB 1A/+5VSB BIOS KBPWR1 3 2 ® PVL-D/1U/SCSI 2 1 +5V (Default) +5VSB PVL-D/1U/SCSI Keyboard power setting 5.
6. Gigabit LAN1 3-pin LAN1_EN1) Broadcom Gigabit LAN1 ® PVL-D/1U/SCSI [1-2] 10/100/1000BASE-T LAN1_EN1 2 1 Enable (Default) 3 2 Disable PVL-D/1U/SCSI LAN1_EN setting 7.
8. SCSI (3-pin SCSI_EN1) Adaptec AIC-7902W SCSI U320 ® PVL-D/1U/SCSI [1-2] RAID SCSI_EN1 2 3 1 2 Enable (Default) Disable PVL-D/SCSI SCSI setting 9. BIOS (3-pin RECOVERY1) BIOS BIOS 1 2 3 [1-2] 4 5 6 7 8 [2-3] BIOS xxxxx.
4.3 ® 34-1 pin FLOPPY1 PVL-D/1U/SCSI 1. FLOPPY1 PIN 1 NOTE: Orient the red markings on the floppy ribbon cable to PIN 1. PVL-D/1U/SCSI Floppy disk drive connector 2. IDE 40-1 pin PRI_IDE, SEC_IDE IDE Ultra DMA 133/100/66 IDE CD-ROM IDE IDE Master Primary Slave Slave Secondary Ultra DMA 133/100/66 IDE Master Ultra DMA 133/100/66 IDE Slave 1. IDE 2.
3. Serial ATA 7-pin SATA1, SATA2 Serial ATA Serial ATA Serial ATA 3Gb/s Serial ATA RAID 0 RAID 1 HostRAID Intel ICH5R Standard IDE Serial ATA / BIOS Configure SATA As RAID GND RSATA_RXP2 RSATA_RXN2 GND RSATA_TXN2 RSATA_TXP2 GND GND RSATA_RXP1 RSATA_RXN1 GND RSATA_TXN1 RSATA_TXP1 GND 4.3.
4. Ultra320 SCSI 68-pin SCSI1, SCSIB1 Adaptec AIC-7902W SCSI U320 68-pin Ultra320 SCSI 15 Ultra320 SCSIB1 1 35 ® PVL-D/1U/SCSI 68-Pin Ultra320/ Ultra2-Wide SCSI Connector SCSIA1 68-Pin Ultra320/ Ultra2-Wide SCSI Connector 34 68 34 68 1 35 PVL-D/SCSI Onboard SCSI connectors SCSI SCSI single-ended (SE) Ultra2 Ultra160 12 25 320MB/sec SE Ultra320 Ultra320 SE 1.
4. 4-pin HDLED1 Add-on Card SCSI/SATA Add-on Card SCSI/SATA ® 1 SCSI_ACTLED+ SCSI_ACTLEDSCSI_ACTLEDSCSI_ACTLED+ PVL-D/1U/SCSI HDLED1 PVL-D/1U/SCSI SCSI/SATA card activity LED connector 5. USB 10-1 pin USB34 USB 2.0 480Mbps 40 GND USB PortA(+) USB PortA(-) Power ® PVL-D/1U/SCSI USB 1.
6. 10-1-pin COM2 BIOS COM2 COM2 ® PVL-D/1U/SCSI COM2 COM2 COM2 PIN 1 PVL-D/1U/SCSI Serial port connectors 3-pin FRNT_FAN1/2 REAR_FAN 1/2 FRNT_FAN1/2 350 740 53.28 /+12 8.88 2.1 4.44 +12V GND Smart Fan ® PVL-D/1U/SCSI REAR_FAN2 CPU_FAN1 GND FAN Power FAN Speed PWM Control CPU_FAN1 REAR_FAN1 CPU_FAN2 FRNT_FAN1 FRNT_FAN2 REAR_FAN1 GND +12V Rotation FRNT_FAN1 PVL-D/1U/SCSI Fan connectors RS160-E3/PS4 GND +12V Rotation CPU_FAN2 PWM Control FAN Speed FAN Power GND 7.
® +5VSB +5VSB BMC SMBCLK 12CCLK1 PSON# BMC_RST# PWROK PSONEN# 16-1 pin BMCCONN1 PVL-D/1U/SCSI 9. BMC +5VSB +5VSB BMC SMBDATA 12CDATA1 FP_PWRBTN# BMC_PRESENT# BMC_SMI# GND BMCCONN1 PVL-D/1U/SCSI BMC connector 10. SMBus 6-1 pin BPSMB1 SMBus SMBus ® PVL-D/1U/SCSI Management Bus BPSMB1 11. SMBus GND I2C_6_DATA# +5V PVL-D/1U/SCSI SMBus connector FAN_DC I2C_6_CLK# 1 5-pin PSUSMB1 I2C_7_CLK# I2C_7_DATA# NC GND +3.
12. ATX ATX12V1 24-pin ATXPWR1, 8-pin ATX +12V 24 ATXPWR 8-pin 2.
4-16 PVL-D/1U/SCSI System panel connector IDE_LED Reset NMIBTN# GND POWERBTN# GND NC RESETBTN# GND HDLED+ HDLED- POWERLED+ NC POWERLEDMLED+ MLEDNC +5V GND GND SPKROUT ® PVL-D/1U/SCSI 13.
6-pin 2-pin Locator RS160-E3/PS4 +5VSB PIN1 PVL-D/1U/SCSI Auxiliary panel connector CASEOPEN GND LOCATORLED1+ LOCATORLED1LOCATORBTN# GND LOCATORLED2LOCATORLED2+ GND I2C_4_DATA# +5VSB LAN1_LINKACTLED+ LAN1_LINKACTLEDLAN2_LINKACTLEDLAN2_LINKACTLED+ NC I2C_4_CLK# ® PVL-D/1U/SCSI 14.
4-18
BIOS BIOS BIOS BIOS
5.1 BIOS BIOS 1. ASUS AFUDOS DOS 2. ASUS CrashFree BIOS 2 BIOS BIOS 3.
5.1.1 AFUDOS AFUDOS BIOS DOS AFUDOS BIOS BIOS BIOS BIOS BIOS BIOS 1024KB BIOS 1. 2. AFUDOS afudos.exe DOS afudos /o[filename] filename A:\>afudos /oOLDBIOS1.ROM 3. Enter BIOS A:\>afudos /oOLDBIOS1.ROM AMI Firmware Update Utility - Version 1.10 Copyright (C) 2002 American Megatrends, Inc. All rights reserved. Reading flash ..... done A:\> BIOS RS160-E3/PS4 DOS 5-3
BIOS AFUDOS tw.asus.com 1. BIOS BIOS BIOS 2. 3. AFUDOS.EXE BIOS DOS afudos /i[filename] filename BIOS A:\>afudos /iI8021A00.100 4. AFUDOS BIOS A:\>afudos /iI8021A00.100 /pbnc AMI Firmware Update Utility - Version 1.10 Copyright (C) 2002 American Megatrends, Inc. All rights reserved. Reading file ....... done Erasing flash ...... done Advance Check ...... Erasing flash ...... done Writing flash ......
5. BIOS DOS A:\>afudos /iI8021A00.100 /pbnc AMI Firmware Update Utility - Version 1.10 Copyright (C) 2002 American Megatrends, Inc. All rights reserved. WARNING!! Do not turn off power during flash BIOS Reading file ....... done Erasing flash ...... done Advance Check ...... Erasing flash ...... done Writing flash ...... done Verifying flash .... done Please restart your computer A:\> RS160-E3/PS4 5-5
5.1.2 CrashFree BIOS 2 BIOS CrashFree BIOS 2 BIOS 1. BIOS BIOS BIOS BIOS 2. BIOS I8021A00.100 BIOS BIOS 1. 2. 3. BIOS BIOS Bad BIOS checksum. Starting BIOS recovery... Checking for floppy... BIOS Bad BIOS checksum. Starting BIOS recovery... Checking for floppy... Floppy found! Reading file “K8NDRE.ROM”. Completed. Start flashing... BIOS 4.
BIOS BIOS 1. 2. 3. BIOS Bad BIOS checksum. Starting BIOS recovery... Checking for floppy... Bad BIOS checksum. Starting BIOS recovery... Checking for floppy... Floppy not found! Checking for CD-ROM... CD-ROM found! Reading file “I8021A00.100”. Completed. Start flashing... BIOS 4. BIOS BIOS http://tw.asus.
5.1.3 Windows BIOS 1. 2. 3. 4. 5. BIOS BIOS BIOS BIOS BIOS BIOS ISP 1. 2. 3. VX.XX.
BIOS BIOS ASUS ASUSUpdate ASUSUpdate 1. 2. Update BIOS from the Internet Next 3.
4. BIOS Next 5. BIOS BIOS BIOS BIOS BIOS 1. BIOS ASUS ASUSUpdate ASUSUpdate 2. from a file 3. Update BIOS Next BIOS 4.
5.2 BIOS BIOS Basic Input and Output System BIOS BIOS BIOS RUN SETUP BIOS BIOS Flash ROM BIOS Flash ROM BIOS BIOS BIOS CMOS RAM BIOS POST Power-On Self Test DELETE DELETE RESET Alt Ctrl + + Delete BIOS 1. BIOS BIOS BIOS 2. 3. Load Setup Defaults BIOS tw.asus.
5.2.1 BIOS Main Advanced Server BIOS SETUP UTILITY Security Boot System Date System Time [Thu 09/22/2005] [11:10:19] Legacy Diskette A [1.44M, 3.5 in] IDE Configuration Primary IDE Master Primary IDE Slave Secondary IDE Master Secondary IDE Slave Third IDE Master Fourth IDE Master : [ST32122A] : [ASUS CD-S520A] :[Not Detected] :[Not Detected] : [Not Detected] : [Not Detected] Exit Use [ENTER], [TAB] or [SHIFT-TAB] to select a field. Use [+] or [-] to configure system time.
5.2.4 System Date System Time Legacy Diskette A IDE Configuration Primary IDE Master Primary IDE Slave Secondary IDE Master Secondary IDE Slave Third IDE Master Fourth IDE Master System Information Main Advanced Power Boot [Thu 09/22/2005] [11:10:19] [1.44M, 3.5 in] :[ST32122A] :[ASUS CD-S520A] :[Not Detected] :[Not Detected] :[Not Detected] :[Not Detected] Use [ENTER], [TAB] or [SHIFTTAB] to select a field. Use [+] or [-] to configure the System time. Exit 5.2.5 Enter 5.2.
5.3 Main Menu BIOS 5.2.1 BIOS Main Advanced Server BIOS SETUP UTILITY Security Boot System Date System Time [Thu 09/22/2005] [11:10:19] Legacy Diskette A [Disabled] IDE Configuration Primary IDE Master Primary IDE Slave Secondary IDE Master Secondary IDE Slave Third IDE Master Fourth IDE Master Exit Use [ENTER], [TAB] or [SHIFT-TAB] to select a field. Use [+] or [-] to configure system time.
5.3.4 IDE IDE Configuration IDE Enter BIOS SETUP UTILITY Main IDE Configuration Onboard IDE Operate Mode Enhanced Mode Support On IDE Detect Time Out (Sec) [Enhanced Mode] [S-ATA] [35] Set [Compatible Mode ] when OS (i.e. WIN ME, 98, or MS DOS) is used. Set [enhanced Mode] when native OS (i.e. WIN2000, WIN XP) is used. Select Screen Select Item +- Change Option F1 General Help F10 Save and Exit ESC Exit v00.00 (C) Copyright 1985-2004, American Megatrends, Inc.
5.3.5 IDE (Primary/Secondary IDE Master/ Slave, Third, and Fourth IDE Master) BIOS IDE IDE Enter BIOS SETUP UTILITY Main Primary IDE Master Device : Vendor : Size : LBA Mode : Block Mode : PIO Mode : Async DMA : Ultra DMA : SMART Monitoring : Select the type or device connected to the system. Hard Disk ST32122A 2.1GB Supported 16 Sectors Supported MultiWord DMA-2 Ultra DMA-5 Supported Type LBA/Large Mode Block(Multi-sector Transfer) PIO Mode DMA Mode S.M.A.R.T.
PIO Mode [Auto] PIO [Auto] [0] [1] [2] [3] [4] SMART Monitoring [Auto] Smart Monitoring, Analysis, and [Auto] [Disabled] [Enabled] Reporting Technology 32Bit Data Transfer [Enabled] 32 5.3.6 [Disabled] [Enabled] System Information BIOS BIOS SETUP UTILITY Main System Information Model Name Model ID ASUSPVL-D/1U/SCSI 8021AD ASUS BIOS Version Date 1001 09/20/2005 Processor System Memory Select Screen Select Item +- Change Option F1 General Help F10 Save and Exit ESC Exit v00.
Processor BIOS SETUP UTILITY Main Processor Information ***CPU1: Brand ID/uCode Ratio Cache Genuine Intel(R) CPU 2.80GHz 0F34h/07h Actual 14 Max 14 L1/16KB L2/2048KB L3/0KB ***CPU1: Brand ID/uCode Ratio Cache Genuine Intel(R) CPU 2.80GHz 0F34h/07h Actual 14 Max 14 L1/16KB L2/2048KB L3/0KB Select Screen Select Item +- Change Option F1 General Help F10 Save and Exit ESC Exit v00.00 (C) Copyright 1985-2004, American Megatrends, Inc.
5.4 Advanced menu BIOS SETUP UTILITY Advanced Configure CPU. Advanced Settings CPU Configuration Chipset Configuration Onboard Device Configuration PCI/PnP Configuration Power Configuration Hardware Monitor +F1 F10 ESC Select Screen Select Item Change Option General Help Save and Exit Exit v00.00 (C) Copyright 1985-2004, American Megatrends, Inc. 5.4.
Single Logical Processor Mode [Disabled ] dual-core [Disabled] [Enabled] Hyper Threading Technology [Enabled] Hyper Threading Intel Pentium 4 Hyper-Threading [Disabled] [Enabled] Max CPUID Value Limit [Disabled] CPUID [Disabled] [Enabled] [Enabled] Execute Disabled Function [ ] (0) [Disabled] BIOS [Disabled] [Enabled] XD Enhanced C1 Control [Auto] [Auto] BIOS CPU C1E [Auto] [Disabled] CPU CPU idle C1E CPU Internal Thermal Control [Auto] [Auto] BIOS [Auto] [Disabled] Intel SpeedStep EIST Intel
5.4.2 Chipset Configuration Enter BIOS SETUP UTILITY Advanced Advanced Chipset Settings Options for NB. WARNING: Setting worng values in below sections may cause system to malfunction. NorthBridge Configuration Onboard LAN Boot ROM Onboard SCSI Boot ROM [Enabled] [Enabled] Select Screen Select Item +- Change Option F1 General Help F10 Save and Exit ESC Exit v00.00 (C) Copyright 1985-2004, American Megatrends, Inc.
BIOS SETUP UTILITY Advanced NorthBridge Configuration DIMM SPEED: DDR2 400 Memory Remap Feature Memory Mirroring/Sparing [Enabled] [Disabled] ENABLED: Allow remapping of overlapped PCI memory above the total physical memory. DISABLED: Do not allow remapping of memory. Select Screen Select Item +- Change Option F1 General Help F10 Save and Exit ESC Exit v00.00 (C) Copyright 1985-2004, American Megatrends, Inc.
5.4.3 BIOS SETUP UTILITY Advanced NorthBridge Configuration Configure the USB support. USB Configuration Super IO Configuration +F1 F10 ESC Select Screen Select Item Change Option General Help Save and Exit Exit v00.00 (C) Copyright 1985-2004, American Megatrends, Inc. USB USB Enter BIOS SETUP UTILITY Advanced USB Configuration Module Version - 2.23.2-5.3 USB Device Enable: None USB Funtion Legacy USB Support USB 2.0 Controller USB 2.
Legacy USB Support [Auto] USB [Auto] USB USB [Disabled] USB [Disabled] [Enabled] [Auto] USB USB 2.0 Controller [Disabled] USB 2.0 [Enabled] [Disabled] USB 2.0 Controller Mode [HiSpeed] USB 2.0 HiSpeed 480 Mbps [HiSpeed] [Full Speed] Full Speed 12 Mbps USB Mass Storage Device Configuration USB Mass Storage Reset Delay [20 Sec] Number of seconds POST waits for the USB mass device after start unit command.
Super IO BIOS SETUP UTILITY Advanced Configure Win83627THF Super IO Chipset Serial Port1 Address Serial Port2 Address Serial Port2 Mode Allows BIOS to select Serial Port1 Base Addresses. [3F8/IRQ4] [2F8/IRQ3] [Normal] Select Screen Select Item Change Option General Help Save and Exit Exit +F1 F10 ESC v00.00 (C) Copyright 1985-2004, American Megatrends, Inc.
Parallel Port Address [378] [278] [3BC] Parallel Port Mode [Normal] Parallel Port [Normal] [Bi-Direction] [EPP] [EPC] Parallel Port IRQ [IRQ7] Parallel Port 5-26 IRQ [IRQ5] [IRQ7] BIOS
5.4.4 PCI PCI PnP PCI/PnP DMA IRQ PCI/PnP ISA ISA BIOS SETUP UTILITY Advanced PCI/PnP Configuration Plug and Play OS Palette Snooping [No] [Disabled] IRQ-3 assigned to IRQ-4 assigned to IRQ-5 assigned to IRQ-7 assigned to IRQ-9 assigned to IRQ-10 assigned to IRQ-11 assigned to IRQ-14 assigned to IRQ-15 assigned to [PCI [PCI [PCI [PCI [PCI [PCI [PCI [PCI [PCI NO: Lets the BIOS configue all the devices in the system.
5.4.5 Power Configuration Enter BIOS SETUP UTILITY Advanced Power Configuration ACPI APIC Support APM EMS Support [Enabled] Include ACPI APIC table pointer to RSDT pointer list. IMPORTANT!!! Do not change the APIC support setting after OS installation; otherwise, a system boot failure may occur. Select Screen Select Item +- Change Option F1 General Help F10 Save and Exit ESC Exit v00.00 (C) Copyright 1985-2004, American Megatrends, Inc.
APM Configuration BIOS SETUP UTILITY Advanced Enable or disable APM.
Restore on AC Power Loss [Last State] [Power Off] [Power On] [Last [Power State] Off] [Power On] [Last State] Power On By PS/2 Keyboard [Disabled] ATX 1 5VSB [Disabled] [Enabled] Power On By PS/2 Mouse [Disabled] [Enabled] ATX PS2 1 5VSB [Disabled] [Enabled] Power On By Ring [Disabled] [Disabled] [Enabled] Power On By PME# [Disabled] [Enabled] [Disabled] [Enabled] PME Power On By RTC Alarm [Disabled] RTC [Enabled] RTC Alarm Data RTC Alarm Hour RTC Alarm RTC Alarm Second Minute [Disabled] [Enabl
5.4.6 Hardware Monitor BIOS SETUP UTILITY Advanced CPU1 Temperture. Hardware Monitor CPU1 Temperature CPU2 Temperature MB Temperature [38ºC/100ºF] [26ºC/78.5ºF] [34ºC/93ºF] CPU1 Fan Speed CPU2 Fan Speed Front1 Fan Speed Front2 Fan Speed REAR1 Fan Speed REAR2 Fan Speed Smart Fan Control CPU1 Temperature CPU2 Temperature MB Temperature [5038RPM] [5045RPM] [N/A] [N/A] [N/A] [N/A] [Smart Fan II] [055] [055] [050] VCORE1 Voltage [ 1.
Smart Fan Control [Smart Fan II] [Disabled] [Smart FAN] [Smart FAN II] Smart Fan Control ture MB Temperature [Enabled] CPU1 Temperature CPU2 Tempera- CPU1/CPU2 Temperature [XXX] MB Temperature [XXX] VCORE1 Voltage, VCORE2 Voltage, 3.
5.5 Main Server menu Advanced Server BIOS SETUP UTILITY Security Boot Remote Access Configuration Exit Configure Remote Access. +F1 F10 ESC Select Screen Select Item Change Option General Help Save and Exit Exit v00.00 (C) Copyright 1985-2004, American Megatrends, Inc. Remote Access Configuration BIOS SETUP UTILITY Server Configure Remote Access type and parameters Remote Access [Disabled] Select Remote Access type.
Remote Access [Disabled] [Disabled] [Enabled] Remote Access [Disabled] Serial port number [COM1] [COM1] [COM2] Baudrate [19200] [115200] [57600] [38400] [19200] [9600] Flow Control [None] [None] [Hardware] [Software] Redirection After BIOS POST [Always] POST Power-On Self-Test [Always] [Disabled] [Boot Loader] [Always] Teminal Type [ANSI] [ANSI] [VT100] [VTUTF8] VT-UTF8 Combo Key Support [Disabled] ANSI VT100 [Disabled] [Enabled] VT-UTF8 Media Tyoe [Serial] [Serial] [LAN] [Serial+LAN] 5-34 BIOS
5.6 Security menu Main Advanced Server BIOS SETUP UTILITY Security Boot Exit Security Settings Supervisor Password User Password to change password. again to disable password. : Not Installed : Not Installed Change Supervisor Password Select Screen Select Item +- Change Option F1 General Help F10 Save and Exit ESC Exit v00.00 (C) Copyright 1985-2004, American Megatrends, Inc.
Main Advanced Server BIOS SETUP UTILITY Security Boot Exit Security Settings Supervisor Password User Password to change password. again to disable password. : Installed : Not Installed Change Supervisor Password User Access Level Change User Password Password Check [Full Access] [Setup] Select Screen Select Item +- Change Option F1 General Help F10 Save and Exit ESC Exit v00.00 (C) Copyright 1985-2004, American Megatrends, Inc.
[Enter] Change User Word Enter Password Password uninstalled.
5.7 Main Boot menu Advanced Server BIOS SETUP UTILITY Security Boot Exit Specifies the Boot Device Priority sequence Boot Device Priority Boot Settings Configuration Select Screen Select Item +- Change Option F1 General Help F10 Save and Exit ESC Exit v00.00 (C) Copyright 1985-2004, American Megatrends, Inc. 5.7.
5.7.2 Boot Settings Configuration BIOS SETUP UTILITY Boot Specifies the Boot allows BIOS to skip certain tests while booting. This will decrease the time needed to boot the system. Boot Settings Configuration Quick Boot Full Logo Display Bootup Num-Lock PS/2 Mouse Support Wait For ‘F1’ If Error Hit ‘DEL’ Message Display Interrupt 19 Capture [Enabled] [Enabled] [On] [Auto] [Enabled] [Enabled] [Disabled] +F1 F10 ESC Select Screen Select Item Change Option General Help Save and Exit Exit v00.
Wait for F1 If Error [Enabled] [Enabled] [F1] [Disabled] [Enabled] Hit DEL Message Display [Enabled] run Setup [Enabled] [Disabled] [Enabled] Press DEL to Interrupt 19 Capture [Disabled] PCI Interrupt 19 [Disabled] [Enabled] 5-40 SCSI [Enabled] BIOS
5.8 BIOS Exit menu BIOS Main Advanced BIOS BIOS SETUP UTILITY Security Boot Server Exit Exit system setup after saving the change. Exit Options Exit & Save Changes Exit & Discard Changes Discard Changes F10 key can be used for this operation. Load Setup Defaults Select Screen Select Item +- Change Option F1 General Help F10 Save and Exit ESC Exit v00.00 (C) Copyright 1985-2004, American Megatrends, Inc.
Discard Changes Enter BIOS BIOS [OK] [Cancel] BIOS Load Setup Defaults F5 [Yes] [No] 5-42 Enter BIOS BIOS BIOS
6.1 RAID 6.1.
6.1.2 Serial ATA RAID SCSI RAID PVL-D/1U/SCSI SCSI 1. SCSI 2. SCSI SCSI 3. SCSI 4 BIOS 6.1.
6.2 Adaptec SCSI SCSIselect(TM) RAID 0 RAID 1 Adaptec AIC-7902 SCSI Adaptec SCSI RAID RAID 10 Adaptec SCSI SCSIselect 1. Ctrl-A SCSIselect (TM) Utility 2. POST SCSI + 3.
6.2.1 SCSI SCSI RAID SCSI SCSI channel Configure/View SCSI Controller Settings 6.2.2 HostRAID Adaptec HostRAID 1. Configuration 2. 3. HostRAID Enable 4.
< Esc > /View HostRAID Settings] 6.2.3 1.
2. SCSI Free RAID SCSI Utilities RAID RAID RAID SCSI Disk RAID 3.
4. < SpaceBar > X 5. 4 RAID < Enter > 6. Strip Size 7.
8. Yes 9. RAID 0 Yes RAID RAID 0 10.
6.2.4 RAID 1 Mirror RAID 1 1. 2. RAID 0 Select RAID Type 1~2 RAID-1 Fault Tolerance Striping Requirements RAID 3. < SpaceBar > < Enter > X 4.
6. RAID-1 Build Option [Create new RAID-1] Create a New RAID-1 - RAID 1 Copy from ( 0) to ( 1) - Copy from ( 1) to ( 0) 7. RAID 1 8. Yes 9. Yes RAID 10.
11. RAID 1 RAID1 12.
6.2.5 RAID 0+1 10, Stripe+Mirror RAID 10 1. HostRAID Setting] < Enter > 2.
3. Select RAID Type High Performance RAID-10 Fault Tolerance, Striping/Mirroring Requirements RAID 4. < SpaceBar > < Enter > X 5.
6. 7. Strip Size < Enter > RAID 10 8. Yes 9.
10.
6.2.6 1. RAID10 HostRAID Setting] 2. < S> Add Spare 3. [Configure/View HostRAID 4.
5. 6.2.7 RAID RAID 10 RAID 10 1.
2. 3. Yes 4.
6.2.8 RAID RAID 1. [Configure/View HostRAID Setting] 2. RAID 0 RAID 10 RAID 1 3 Drive ID 1 Drive ID 2 Drive ID 1 & 2 None - drive 1 drive 2 drive 1 3. Yes 4.
6.2.9 RAID RAID 1 RAID 10 RAID 1. RAID 2. < Enter > Yes Build/Rebuile Complete 3.
6.2.10 RAID RAID 1. 2.
3. Verify Disk Media SCSI Disk Utility 4. SCSI 6.2.11 RAID 1.
2. 3. RAID RAID 4.
7.1 RAID RAID RAID 7.1.1 Red Hat Enterprise ver. 3.0 Red Hat Enterprise ver. 3.0 RAID 1. 2.
3. Yes 4.
5. RAID 6. 7-4 Red Hat Enterprise ver. 3.0 RAID 2U/SCSI 7.
7.2 Broadcom Gigabit 7.2.1 Windows 2000/2003 Server Windows 2000/2003 Broadcom Gigabit 1. 2. Administrator Windows New Hardware Found 3. Windows Cancel / Drivers Drivers BIN 3. ASSETUP.
4.
7.2.2 Red Hat Enterprise ver. 3.0 Red Hat Enterprise ver. 3.0 Broadcom Gigabit Source RPM 1. source RPM package rpm -ivh bcm5700.scr.rpm RPM 2. cd /user/src/{redhat,OpenLinux,turbo,package,rpm...} rpm -bb SPECS/bcm5700.spec or rpmbuild -bb SPECS/bcm5700.spec RPM Support CD driver and man 3. page rpm -ivh RPMS/i386/bcm5700-.i386.rpm Linux force option 2.2.x /lib/modules//net/bcm5700.o 2.4.x /lib/modules//kerenl/drivers/net/bcm5700.o bcm5700 2.4.
TAR TAR 1. TAR tar xvzf bcm5700-.tar.gz 2. bcm5700.o cd bcm5700-/scr make 3. insmod bcm5700.o 4. make install 5.
7.3 ATI RAGE XL 7.3.1 Windows 2000 Server Windows XP/20003 Server ATI RAGE XL Windows 2000 Windows 2000 Windows 2003/XP ATI Rage XL 1. 2. Administrator Windows New Hardware Found 3. Windows Cancel / Drivers 4.
5. Next 7.3.2 Red Hat Enterprise ver. 3.0 Red Hat Enterprise ver. 3.
7.4 tw.asus.com 7.4.1 Drivers Drivers BIN ASSETUP.EXE 7.4.
7.4.3 Management Software 7.4.4 Utilities menu Windows 7.4.
