©2006 2
1-2
¤ ¤ 1-3
1-4
1-5
2 1 3 4 5 6 8 9 1-6 7
1-7
ACT/LINK LED SPEED LED 10Mbps 100Mbps 1000Mbps 1-8
2-2
2-3
CPU1 ® PVL-D/1U/SCSI CPU2 Intel Xeon PVL-D/1U/SCSI CPU Socket 604 2-4
2-5
2-6
112 Pins DIMM_B4 ® PVL-D/1U/SCSI 128 Pins DIMM_A4 DIMM_B3 DIMM_A3 DIMM_B2 DIMM_A2 DIMM_B1 DIMM_A1 PVL-D/1U/SCSI 240-pin DDR2 DIMM sockets 3. 4.
2-8
2-9
2-10
2-11
2-12
ICH5R IDE controller ICH5R SATA controller ICH5R SMBus controller ICH5R USB UHCI controller #1 ICH5R USB UHCI controller #2 ICH5R USB 2.
5 9 6 7 2 8 10 11 13 12 1 4 14 3 2-14
PS/2 KBPWR1 PSUSMB1 HDLED1 ® ® Intel PXH Intel PXH J2 FM_CPU1 ATX12V1 33cm (13in) CPU_FAN1 DDR DIMM_B4 (64/72 bit, 240-pin module) ATXPWR1 REAR_FAN2 DDR DIMM_B3 (64/72 bit, 240-pin module) DDR DIMM_A4 (64/72 bit, 240-pin module) USB34 USBPW34 T: Mouse B: Keyboard USB1 USB2 DDR DIMM_A3 (64/72 bit, 240-pin module) DDR DIMM_B2 (64/72 bit, 240-pin module) DDR DIMM_B1 (64/72 bit, 240-pin module) DDR DIMM_A2 (64/72 bit, 240-pin module) ® CR2032 3V Lithium Cell CMOS Power AUX_PANEL1 BUZZ
2-16
2-17
2-18
2-19
2-20
2-21
2-22
3-2
3-3
3-4
33cm (13in) ATXPWR1 PS/2 DDR DIMM_B4 (64/72 bit, 240-pin module) KBPWR1 DDR DIMM_A4 (64/72 bit, 240-pin module) FM_CPU1 DDR DIMM_B3 (64/72 bit, 240-pin module) USBPW12 PARALLEL PORT DDR DIMM_A3 (64/72 bit, 240-pin module) DDR DIMM_B2 (64/72 bit, 240-pin module) CPU1 DDR DIMM_A2 (64/72 bit, 240-pin module) DDR DIMM_B1 (64/72 bit, 240-pin module) RECPVERY1 Broadcom BCM5721 LAN1_EN1 mPGA 604 Broadcom BCM5721 RJ-45 (LAN-2) ® REAR_FAN1 RJ-45 (LAN-1) PVL-D/1U/SCSI DDR DIMM_A1 (64/72 bit, 240-p
1. 2. 3. 4. 5. CPU Sockets DDR2 DIMM sockets PCI/PCI-X slots Zero-Channel RAID socket Mini-PCI socket 4-2 4-2 4-2 4-2 4-2 1. 2. 3. 4. 5. 6. 7. 8. 9.
® PVL-D/1U/SCSI CLRTC1 2 1 PVL-D/1U/SCSI Clear RTC RAM 4-4 Normal (Default) 3 2 Clear CMOS
FM_CPU1 ® PVL-D/1U/SCSI 3 2 DC mode (Default) 2 1 PWM FM_CPU2 PVL-D/1U/SCSI FM_CPU setting 2 1 DC mode (Default) 3 2 PWM ® PVL-D/1U/SCSI USBPW12 2 1 +5V (Default) 3 2 +5VSB USBPW34 2 3 +5VSB PVL-D/1U/SCSI USB device wake up 1 2 +5V (Default) 4-5
KBPWR1 3 2 ® PVL-D/1U/SCSI 2 1 +5V (Default) +5VSB ® PVL-D/1U/SCSI PVL-D/1U/SCSI Keyboard power setting VGA_EN1 1 2 PVL-D/1U/SCSI VGA setting 4-6 Enable (Default) 2 3 Disable
® PVL-D/1U/SCSI LAN1_EN1 2 1 Enable (Default) 3 2 Disable ® PVL-D/1U/SCSI PVL-D/1U/SCSI LAN1_EN setting LAN2_EN1 2 1 Enable (Default) 3 2 Disable PVL-D/1U/SCSI LAN2_EN setting 4-7
® PVL-D/1U/SCSI SCSI_EN1 2 3 1 2 Enable (Default) Disable ® PVL-D/1U/SCSI PVL-D/SCSI SCSI setting RECOVERY1 1 2 Normal (Default) PVL-D/1U/SCSI BIOS recovery setting 4-8 2 3 BIOS Recovery
® PVL-D/1U/SCSI FLOPPY1 PIN 1 NOTE: Orient the red markings on the floppy ribbon cable to PIN 1. ® PVL-D/1U/SCSI PVL-D/1U/SCSI Floppy disk drive connector SEC_IDE PIN 1 PRI_IDE PIN 1 PVL-D/1U/SCSI IDE connectors NOTE: Orient the red markings (usually zigzag) on the IDE ribbon cable to PIN 1.
PVL-D/1U/SCSI SATA connectors SATA1/SATA2 SATA3/SATA4 4-10 Master Slave GND RSATA_RXP2 RSATA_RXN2 GND RSATA_TXN2 RSATA_TXP2 GND GND RSATA_RXP1 RSATA_RXN1 GND RSATA_TXN1 RSATA_TXP1 GND ® PVL-D/1U/SCSI SATA2 SATA1
SCSIB1 1 35 ® PVL-D/1U/SCSI 68-Pin Ultra320/ Ultra2-Wide SCSI Connector SCSIA1 68-Pin Ultra320/ Ultra2-Wide SCSI Connector 34 68 34 68 1 35 PVL-D/SCSI Onboard SCSI connectors 68-pin Internal SCSI Cable (Twisted-Pair Ribbon) ® PVL-D/1U/SCSI Channel A Internal SCSI Devices (up to 15 devices) 68-pin Female Terminator 68-pin Internal SCSI Cable (Twisted-Pair Ribbon) Channel B Internal SCSI Devices (up to 15 devices) 68-pin Female Terminator PVL-D/SCSI SCSI connection example 4-11
4-12 PVL-D/1U/SCSI USB connector NC GND USB PortB(+) USB PortB(-) Power GND USB PortA(+) USB PortA(-) Power ® PVL-D/1U/SCSI SCSI_ACTLED+ SCSI_ACTLEDSCSI_ACTLEDSCSI_ACTLED+ ® PVL-D/1U/SCSI HDLED1 1 PVL-D/1U/SCSI SCSI/SATA card activity LED connector USB34 1
® PVL-D/1U/SCSI COM2 PIN 1 PVL-D/1U/SCSI Serial port connectors REAR_FAN1 CPU_FAN2 FRNT_FAN1 FRNT_FAN2 REAR_FAN1 GND +12V Rotation FRNT_FAN1 PVL-D/1U/SCSI Fan connectors GND +12V Rotation CPU_FAN2 PWM Control FAN Speed FAN Power GND ® PVL-D/1U/SCSI REAR_FAN2 CPU_FAN1 GND FAN Power FAN Speed PWM Control CPU_FAN1 REAR_FAN2 Rotation +12V GND FRNT_FAN2 GND +12V Rotation 4-13
4-14 ® PVL-D/1U/SCSI +5VSB +5VSB BMC SMBDATA 12CDATA1 FP_PWRBTN# BMC_PRESENT# BMC_SMI# GND PVL-D/1U/SCSI BMC connector GND I2C_6_DATA# +5V FAN_DC I2C_6_CLK# PVL-D/1U/SCSI SMBus connector I2C_7_CLK# I2C_7_DATA# NC GND +3.
+3 Volts -12 Volts Ground PSON# Ground Ground Ground -5 Volts +5 Volts +5 Volts +5 Volts Ground 12V 12V 12V 12V PVL-D/1U/SCSI ATX power connectors GND GND GND GND +3 Volts +3 Volts Ground +5 Volts Ground +5 Volts Ground Power OK +5V Standby +12 Volts +12 Volts +3 Volts ® PVL-D/1U/SCSI ATXPWR1 ATX12V1 24-pin Power Connector 8-pin For Power Supply with 24-pin Power Connector 4-15
PVL-D/1U/SCSI System panel connector 4-16 NMIBTN# GND POWERBTN# GND NC RESETBTN# GND HDLED+ HDLED- PANEL1 POWERLED+ NC POWERLEDMLED+ MLEDNC +5V GND GND SPKROUT ® PVL-D/1U/SCSI
PVL-D/1U/SCSI Auxiliary panel connector +5VSB PIN1 CASEOPEN GND LOCATORLED1+ LOCATORLED1LOCATORBTN# GND LOCATORLED2LOCATORLED2+ AUX_PANEL1 4-17 GND I2C_4_DATA# +5VSB LAN1_LINKACTLED+ LAN1_LINKACTLEDLAN2_LINKACTLEDLAN2_LINKACTLED+ NC I2C_4_CLK# ® PVL-D/1U/SCSI
4-18
5-2
A:\>afudos /oOLDBIOS1.ROM A:\>afudos /oOLDBIOS1.ROM AMI Firmware Update Utility - Version 1.10 Copyright (C) 2002 American Megatrends, Inc. All rights reserved. Reading flash ..... done A:\> 5-3
A:\>afudos /iI8021A00.100 A:\>afudos /iI8021A00.100 /pbnc AMI Firmware Update Utility - Version 1.10 Copyright (C) 2002 American Megatrends, Inc. All rights reserved. Reading file ....... done Erasing flash ...... done Advance Check ...... Erasing flash ...... done Writing flash ......
A:\>afudos /iI8021A00.100 /pbnc AMI Firmware Update Utility - Version 1.10 Copyright (C) 2002 American Megatrends, Inc. All rights reserved. WARNING!! Do not turn off power during flash BIOS Reading file ....... done Erasing flash ...... done Advance Check ...... Erasing flash ...... done Writing flash ...... done Verifying flash .... done Please restart your computer A:\> 5-5
Bad BIOS checksum. Starting BIOS recovery... Checking for floppy... Bad BIOS checksum. Starting BIOS recovery... Checking for floppy... Floppy found! Reading file “K8NDRE.ROM”. Completed. Start flashing...
Bad BIOS checksum. Starting BIOS recovery... Checking for floppy... Bad BIOS checksum. Starting BIOS recovery... Checking for floppy... Floppy not found! Checking for CD-ROM... CD-ROM found! Reading file “I8021A00.100”. Completed. Start flashing...
5-8
5-9
5-10
5-11
Main Advanced Server BIOS SETUP UTILITY Security Boot System Date System Time [Thu 09/22/2005] [11:10:19] Legacy Diskette A [1.44M, 3.5 in] IDE Configuration Primary IDE Master Primary IDE Slave Secondary IDE Master Secondary IDE Slave Third IDE Master Fourth IDE Master System Information : [ST32122A] : [ASUS CD-S520A] :[Not Detected] :[Not Detected] : [Not Detected] : [Not Detected] Exit Use [ENTER], [TAB] or [SHIFT-TAB] to select a field. Use [+] or [-] to configure system time.
System Date System Time Legacy Diskette A IDE Configuration Primary IDE Master Primary IDE Slave Secondary IDE Master Secondary IDE Slave Third IDE Master Fourth IDE Master System Information [Thu 09/22/2005] [11:10:19] [1.44M, 3.5 in] :[ST32122A] :[ASUS CD-S520A] :[Not Detected] :[Not Detected] :[Not Detected] :[Not Detected] Use [ENTER], [TAB] or [SHIFTTAB] to select a field. Use [+] or [-] to configure the System time.
Main Advanced Server BIOS SETUP UTILITY Security Boot System Date System Time [Thu 09/22/2005] [11:10:19] Legacy Diskette A [Disabled] IDE Configuration Primary IDE Master Primary IDE Slave Secondary IDE Master Secondary IDE Slave Third IDE Master Fourth IDE Master System Information : [ST32122A] : [ASUS CD-S520A] :[Not Detected] :[Not Detected] : [Not Detected] : [Not Detected] Exit Use [ENTER], [TAB] or [SHIFT-TAB] to select a field. Use [+] or [-] to configure system time.
BIOS SETUP UTILITY Main IDE Configuration Onboard IDE Operate Mode Enhanced Mode Support On IDE Detect Time Out (Sec) [Enhanced Mode] [S-ATA] [35] Set [Compatible Mode ] when OS (i.e. WIN ME, 98, or MS DOS) is used. Set [enhanced Mode] when native OS (i.e. WIN2000, WIN XP) is used. Select Screen Select Item +- Change Option F1 General Help F10 Save and Exit ESC Exit v00.00 (C) Copyright 1985-2004, American Megatrends, Inc.
BIOS SETUP UTILITY Main Primary IDE Master Device : Vendor : Size : LBA Mode : Block Mode : PIO Mode : Async DMA : Ultra DMA : SMART Monitoring : Hard Disk ST32122A 2.1GB Supported 16 Sectors Supported MultiWord DMA-2 Ultra DMA-5 Supported Type LBA/Large Mode Block(Multi-sector Transfer) PIO Mode DMA Mode S.M.A.R.T. 32Bit Data Transfer [Auto] [Auto] [Auto] [Auto] [Auto] [Auto] [Disabled] Select the type or device connected to the system.
BIOS SETUP UTILITY Main System Information Model Name Model ID ASUSPVL-D/1U/SCSI 8021AD ASUS BIOS Version Date 1001 09/20/2005 Processor System Memory +F1 F10 ESC Select Screen Select Item Change Option General Help Save and Exit Exit v00.00 (C) Copyright 1985-2004, American Megatrends, Inc.
BIOS SETUP UTILITY Main Processor Information ***CPU1: Brand ID/uCode Ratio Cache Genuine Intel(R) CPU 2.80GHz 0F34h/07h Actual 14 Max 14 L1/16KB L2/2048KB L3/0KB ***CPU1: Brand ID/uCode Ratio Cache Genuine Intel(R) CPU 2.80GHz 0F34h/07h Actual 14 Max 14 L1/16KB L2/2048KB L3/0KB Select Screen Select Item +- Change Option F1 General Help F10 Save and Exit ESC Exit v00.00 (C) Copyright 1985-2004, American Megatrends, Inc.
BIOS SETUP UTILITY Advanced Configure CPU. Advanced Settings CPU Configuration Chipset Configuration Onboard Device Configuration PCI/PnP Configuration Power Configuration Hardware Monitor +F1 F10 ESC Select Screen Select Item Change Option General Help Save and Exit Exit v00.00 (C) Copyright 1985-2004, American Megatrends, Inc.
5-20
BIOS SETUP UTILITY Advanced Advanced Chipset Settings Options for NB. WARNING: Setting worng values in below sections may cause system to malfunction. NorthBridge Configuration Onboard LAN Boot ROM Onboard SCSI Boot ROM [Enabled] [Enabled] Select Screen Select Item +- Change Option F1 General Help F10 Save and Exit ESC Exit v00.00 (C) Copyright 1985-2004, American Megatrends, Inc.
BIOS SETUP UTILITY Advanced NorthBridge Configuration DIMM SPEED: DDR2 400 Memory Remap Feature Memory Mirroring/Sparing [Enabled] [Disabled] ENABLED: Allow remapping of overlapped PCI memory above the total physical memory. DISABLED: Do not allow remapping of memory. Select Screen Select Item +- Change Option F1 General Help F10 Save and Exit ESC Exit v00.00 (C) Copyright 1985-2004, American Megatrends, Inc.
BIOS SETUP UTILITY Advanced NorthBridge Configuration Configure the USB support. USB Configuration Super IO Configuration +F1 F10 ESC Select Screen Select Item Change Option General Help Save and Exit Exit v00.00 (C) Copyright 1985-2004, American Megatrends, Inc. BIOS SETUP UTILITY Advanced USB Configuration Module Version - 2.23.2-5.3 USB Device Enable: None USB Funtion Legacy USB Support USB 2.0 Controller USB 2.
USB Mass Storage Device Configuration USB Mass Storage Reset Delay [20 Sec] Number of seconds POST waits for the USB mass device after start unit command.
BIOS SETUP UTILITY Advanced Configure Win83627THF Super IO Chipset Serial Port1 Address Serial Port2 Address Serial Port2 Mode [3F8/IRQ4] [2F8/IRQ3] [Normal] Allows BIOS to select Serial Port1 Base Addresses. +F1 F10 ESC Select Screen Select Item Change Option General Help Save and Exit Exit v00.00 (C) Copyright 1985-2004, American Megatrends, Inc.
5-26
BIOS SETUP UTILITY Advanced PCI/PnP Configuration Plug and Play OS Palette Snooping [No] [Disabled] IRQ-3 assigned to IRQ-4 assigned to IRQ-5 assigned to IRQ-7 assigned to IRQ-9 assigned to IRQ-10 assigned to IRQ-11 assigned to IRQ-14 assigned to IRQ-15 assigned to [PCI [PCI [PCI [PCI [PCI [PCI [PCI [PCI [PCI Device] Device] Device] Device] Device] Device] Device] Device] Device] NO: Lets the BIOS configue all the devices in the system.
BIOS SETUP UTILITY Advanced Power Configuration ACPI APIC Support APM EMS Support [Enabled] Include ACPI APIC table pointer to RSDT pointer list. IMPORTANT!!! Do not change the APIC support setting after OS installation; otherwise, a system boot failure may occur. Select Screen Select Item +- Change Option F1 General Help F10 Save and Exit ESC Exit v00.00 (C) Copyright 1985-2004, American Megatrends, Inc.
BIOS SETUP UTILITY Advanced APM Configuration Power Management/APM Video Power Down Mode Hard Disk Power Down Mode Suspend Time Out (Minute) Throttle Slow Clock Ratio [Enabled] [Suspend] [Suspend] [Disabled] [50%] Power Button Funtion Restore on AC Power Loss [On/Off] [Last State] Resume Resume Resume Resume Resume [Disabled] [Disabled] [Disabled] [Disabled] [Disabled] By By By By By PS/2 Keyboard PS/2 Mouse Ring PME# RTC Enable or disable APM.
5-30
BIOS SETUP UTILITY Advanced CPU1 Temperture. Hardware Monitor CPU1 Temperature CPU2 Temperature MB Temperature [38ºC/100ºF] [26ºC/78.5ºF] [34ºC/93ºF] CPU1 Fan Speed CPU2 Fan Speed Front1 Fan Speed Front2 Fan Speed REAR1 Fan Speed REAR2 Fan Speed Smart Fan Control CPU1 Temperature CPU2 Temperature MB Temperature [5038RPM] [5045RPM] [N/A] [N/A] [N/A] [N/A] [Smart Fan II] [055] [055] [050] VCORE1 Voltage [ 1.
5-32
Main Advanced Server BIOS SETUP UTILITY Security Boot Remote Access Configuration Exit Configure Remote Access. +F1 F10 ESC Select Screen Select Item Change Option General Help Save and Exit Exit v00.00 (C) Copyright 1985-2004, American Megatrends, Inc. BIOS SETUP UTILITY Server Configure Remote Access type and parameters Remote Access [Disabled] Select Remote Access type. Select Screen Select Item +- Change Option F1 General Help F10 Save and Exit ESC Exit v00.
5-34
Main Advanced Server BIOS SETUP UTILITY Security Boot Security Settings Supervisor Password User Password : Not Installed : Not Installed Exit to change password. again to disable password. Change Supervisor Password Select Screen Select Item +- Change Option F1 General Help F10 Save and Exit ESC Exit v00.00 (C) Copyright 1985-2004, American Megatrends, Inc.
Main Advanced Server BIOS SETUP UTILITY Security Boot Security Settings Supervisor Password User Password : Installed : Not Installed Change Supervisor Password User Access Level Change User Password Password Check Exit to change password. again to disable password. [Full Access] [Setup] Select Screen Select Item +- Change Option F1 General Help F10 Save and Exit ESC Exit v00.00 (C) Copyright 1985-2004, American Megatrends, Inc.
5-37
Main Advanced Server BIOS SETUP UTILITY Security Boot Boot Device Priority Boot Settings Configuration Exit Specifies the Boot Device Priority sequence Select Screen Select Item +- Change Option F1 General Help F10 Save and Exit ESC Exit v00.00 (C) Copyright 1985-2004, American Megatrends, Inc. BIOS SETUP UTILITY Boot Boot Device Priority 1st Boot Device 2nd Boot Device 3rd Boot Device [1st FLOPPY DRIVE] [PS-ASUS CD-S520/A] [PM-ST32122A] Specifies the Boot sequence from the available devices.
BIOS SETUP UTILITY Boot Boot Settings Configuration Quick Boot Full Logo Display Bootup Num-Lock PS/2 Mouse Support Wait For ‘F1’ If Error Hit ‘DEL’ Message Display Interrupt 19 Capture [Enabled] [Enabled] [On] [Auto] [Enabled] [Enabled] [Disabled] Specifies the Boot allows BIOS to skip certain tests while booting. This will decrease the time needed to boot the system. +F1 F10 ESC Select Screen Select Item Change Option General Help Save and Exit Exit v00.
5-40
Main Advanced Server Exit Options Exit & Save Changes Exit & Discard Changes Discard Changes BIOS SETUP UTILITY Security Boot Exit Exit system setup after saving the change. F10 key can be used for this operation. Load Setup Defaults Select Screen Select Item +- Change Option F1 General Help F10 Save and Exit ESC Exit v00.00 (C) Copyright 1985-2004, American Megatrends, Inc.
5-42
6-2
6-3
6-4
6-5
6-6
6-7
6-8
6-9
6-10
6-11
6-12
6-13
6-14
6-15
6-16
6-17
6-18
6-19
6-20
6-21
6-22
6-23
6-24
7-2
7-3
7-4
7-5
7-6
7-7
7-8
7-9
7-10
7-11
7-12