RS260-E3 Intel® XeonTM 2U
©2005 RS260-E3 V1 T2267 2005 2 12
.................................................................................................... 7 .................................................................................................... 7 ................................................................ 9 1.1 1.2 1.3 1.4 1.5 1.6 1.6.1 1.6.2 1.6.3 1.6.4 1.6.5 ................................................................................... 1-2 ....................................................................................... 1-3 ...
2.5.3 ZCR ................................................................................. 2-23 2.5.4 Mini-PCI .......................................................................... 2-23 2.6 ......................................................................................... 2-25 2.6.1 ...................................................................................... 2-26 2.6.2 SCSI ................................................................................. 2-27 2.6.3 SCSI ..............
.2.1 BIOS ................................................................ 5-12 5.2.2 .................................................................. 5-12 5.2.3 ...................................................................... 5-12 5.2.4 .................................................................................. 5-13 5.2.5 ...................................................................................... 5-13 5.2.6 .........................................................................
.2.1 6.2.2 6.2.3 6.2.4 6.2.5 6.2.6 6.2.7 6.2.8 6.2.9 6.2.10 6.2.11 SCSI ...................................................................... 6-5 HostRAID ......................................................... 6-5 RAID 0 .............................................................................. 6-6 RAID 1 Mirror .......................................................... 6-10 RAID 0+1 10, Stripe+Mirror ................................... 6-13 RAID1 10 ...................................... 6-17 ...
RS260-E3 7
BIOS RS260-E3 9
1. 2.
RS260-E3
1.
1.2 RS260-E3 2U 1/2MB L2 PVL-D/2U/SCSI Intel Xeon Nocona ® EM64T 2U AR21 PVL-D/2U/SCSI Intel® E7520 MCH Intel® ICH5R Intel® PXH Intel® Xeon 800MHz FSB CPU EM64T EIST Enhanced Intel SpeedStep Technology Hyper-Threading 8 240-pin 256MB registered ECC DDR II-400 16 GB 2 x Broadcom BCM5721 Gigabit PCI express 1.
1 x PS/2 1x 2 x USB 2.0 1x SCSI 1 x PS/2 1 x VGA 2 x RJ-45 Web ASWM Automatic System Restart, ASR 700W 732.5mm 1-4 115V~230V,50Hz~60Hz x 448mm x 87.
1.3 RS260-E3 2 USB LED B 1.4 RS260-E3 RS260-E3 1 2 3 4 9 5 10 1. 700W 2. 3. PS/2 4. 5. USB 6. 7. low-profile PCI-X 8. 6 11 12 7 13 14 8 15 16 17 9. 10. PS/2 11. COM1 12. 13. Gigabit LAN1 14. Gigabit LAN2 15. SCSI 16. Location 17.
1.5 RS260-E3 CPU 10 8 7 6 11 9 12 4 5 3 1 1 1. 2. 3. 4. CPU1 5. CPU2 6. PVL-D/2U/SCSI 1-6 2 7. low-profile PCI-X 8. PCI-X 9. 10. 11. PCI-X 12.
1.6 1.6.
1.6.2 1 2 1 1 1 2 2 2 ASWM 1.6.
1.6.4 OFF No AC-in 1.6.5 ACT/LINK LED SPEED LED LAN ACT/LINK LED OFF SPEED LED OFF 10Mbps 100Mbps 1000Mbps LAN1 LAN2 2 LAN 2.8.
1-10
RS260-E3
2.1 RS260-E3 2.1.1 1. 2.
2.1.2 1. 2.
2.1.22.1.2 - 1. 2. 3. 4.
2.1.3 1. 2. 3. 4. 5.
2.1.4 RS260-E3 CPU CPU 80mm 1. 2. 3.
2.1.5 CPU 1. CPU CPU 80mm 2. 80mm 80mm 3.
2.2 CPU 604 ZIF Intel Xeon CPU1 Intel Xeon ® PVL-D/2U/SCSI CPU2 PVL-D/2U/SCSI CPU Socket 604 2.2.1 1. 2. 3.
4. CPU 2.2.2 CPU CPU CPU 1 CPU CPU ( ) CPU ( ) 1.
2. 3. 4. 5. 6.
7. CPU 8. CPU 9.
2.2.3 1. CPU CPU CPU 2. 3. 4.
2.3 2.3.1 DDR II DIMM Double Data Rate II 16GB ECC 240-pin registered ECC 128 Pins 112 Pins DIMM_B4 ® PVL-D/2U/SCSI DDR II DIMM DIMM_A4 DIMM_B3 DIMM_A3 DIMM_B2 DIMM_A2 DIMM_B1 DIMM_A1 PVL-D/2U/SCSI 240-pin DDR2 DIMM sockets 1. CAS Latency DDR II QVL 2. 2 GB - 16GB 3. 4. 128MB x16 DIMM_B4 5.
Single Rank Single Rank Dual Rank 2-14 Dual Rank
2.3.2 DDR DIMM 1. 2. DDR 3. DDR 2.3.3 1. 2.
2.4 RS260-E3 SCA SCSI 2.4.1 1. 2. 3. 4.
5. SCSI 4 6. 7.
2.5 RS260-E3 PCI-X 64-bit 66MHz 3V PCI-X 100MHz Low-profile 64-bit 133MHz 3V PCI-X ZCR Zero Channel RAID PCI-X2 PCI-X1 PCI-X 2.5.1 1. Low-profile PCI-X Low-profile PCI-X PCI-X1 PCI-X 2. 3.
2.5.2 PCI-X PCI-X 1. PCI PCI-X 45 2. 3. PCI-X 4.
PCI-X 1 133 MHz 2 100 MHz 3 66 MHz 5. PCI-X 6. 7. 8.
9. 4-pin 4-pin PCI 10. 11.
12. 13. PCI-X PCI-X2 14.
2.5.3 ZCR ZCR Adaptec AIC-2015 RAID 7092 SCSI RAID 0 RAID1 RAID10 RAID5 RAID 50 JBOD AIC-2015 BIOS 2015 2015 Linux RAID RAID 8 146 GB RedHat SuSE RAID1 73GB HDD 16 2.5.
IRQ 0 1 2 3* 4* 5* 6 7* 8 9* 10* 11* 12* 13 14* 15* 1 2 N/A 11 12 13 14 15 3 4 5 6 7 8 9 10 COM 2 COM 1 LPT 2 LPT 1 CMOS/ ACPI PCI PCI PS/2 IDE IDE * ICH5 IDE Controller ICH5 SATA Controller ICH5 SMBus Controller ICH5 USB UHCI Controller #1 ICH5 USB UHCI Controller #2 ICH5 USB 2.
2.
2.6.
2.6.
2.6.
SCSI 3 RAID SCSI-A SCSI-B RS260-E3 SCSI BP-1 SCSI BP-2 SCSI 2-29
SCSI 4 RAID SCSI-A SCSI-B 2-30 SCSI
2.6.4 SCSI ID 4 0 8 5 1 9 6 2 10 2.6.
2.6.
2.6.
2-34
2.7 1. 2. 3. mid-fans 2.7.1 80mm 4. / 5. 6. SCSI / mid-fans 1. 2 3.
2.7.2 60mm 1. 2. 3. 2.7.3 1. 2. 3. 4.
2.7.1 1. 2. 3.
2.7.5 1. 2. 3. 2.7.6 SCSI SCSI 1. SCSI 2. 3.
RS260-E3
3.1 RS260-E3 1. 2. 3. 4.
3.2 RS260-E3 2U 1. 2. 3.
3.3 1. 2. 3. 4. 5.
6. 7. 8.
3.4 1. 2. 3. 4. 5.
Jumper
4.
RS260-E3 4-3
4.3 CEK CEK CEK 1. 2.
3. CEK 1. CEK CPU2 CPU1 2.
4.4 1.
2. CPU pin pin 3-pin FM_CPU1,FM_CPU2 CPU CPU_FAN1 CPU_FAN2 [1-2] 4-pin 4-pin 33[2-3] FM_CPU1 2 1 PWM ® PVL-D/2U/SCSI 3 2 DC mode (Default) FM_CPU2 PVL-D/2U/SCSI FM_CPU setting 3. USB 3 2 2 1 DC mode (Default) PWM 3-pin USBPW12, USBPW34 +5V USB S1 +5VSB S3 S4 USB +5V [1-2] 3 2 2 1 +5V (Default) ® PVL-D/2U/SCSI USBPW12 +5VSB USBPW34 1 2 2 3 +5VSB +5V (Default) PVL-D/2U/SCSI USB device wake up 1. USB +5VSB 500mA/+5VSB 2. +5VSB 3. WIndows 2000 RS260-E3 Service Pack 4.
4. (3-pin KBPWR1) KBPWR [2-3] +5VSB 1A/+5VSB BIOS KBPWR1 3 2 ® PVL-D/2U/SCSI 2 1 +5V (Default) +5VSB PVL-D/2U/SCSI Keyboard power setting 5.
6. Gigabit LAN1 3-pin LAN1_EN1) [1-2] Broadcom BCM5721 Gigabit 10/100/1000BASE-T ® PVL-D/2U/SCSI LAN1 LAN1_EN1 3 2 2 1 Enable (Default) Disable PVL-D/2U/SCSI LAN1_EN setting 7.
8. SCSI (3-pin SCSI_EN1) [1-2] Adaptec AIC-7902W SCSI ® PVL-D/2U/SCSI U320 SCSI_EN1 2 3 1 2 Enable (Default) Disable PVL-D/2U/SCSI SCSI setting 9. BIOS (3-pin RECOVERY1) BIOS BIOS 1 AFUDOS.EXE ROM 2 BIOS xxxx-xxx.
4.5 1-4 ® 34-1 pin FLOPPY1 PVL-D/2U/SCSI 1. FLOPPY1 PIN 1 NOTE: Orient the red markings on the floppy ribbon cable to PIN 1. PVL-D/2U/SCSI Floppy disk drive connector IDE 2.
3. IDE 40-1 pin PRI_IDE SEC_IDE IDE UltraDMA/100/66 IDE CD-ROM IDE IDE Master Slave 1. UltraDMA ® UltraDMA/100/66 PVL-D/2U/SCSI 2. IDE SEC_IDE PIN 1 PRI_IDE PIN 1 PVL-D/2U/SCSI IDE connectors 4. SMBus NOTE: Orient the red markings (usually zigzag) on the IDE ribbon cable to PIN 1. 5-pin PSUSMB1 SMBus System ® PVL-D/2U/SCSI I2C_7_CLK# I2C_7_DATA# NC GND +3.
5.
6. Ultra320 SCSI 68-pin SCSI-A1, SCSI-B1 68-pin Ultra320 SCSI 15 Ultra320 SCSIB1 1 35 ® PVL-D/2U/SCSI 68-Pin Ultra320/ Ultra2-Wide SCSI Connector SCSIA1 68-Pin Ultra320/ Ultra2-Wide SCSI Connector 34 68 34 68 1 35 PVL-D/2U/SCSI Onboard SCSI connectors SCSI SCSI single-ended (SE) Ultra2 Ultra160 12 25 320MB/sec SE Ultra320 I/O SCSI Ultra320 SE 1.
7. USB 2.0 10-1pin USB34 USB Mbps USB 1.1 USB 2.0 40 12 Mbps 480 USB GND USB PortA(+) USB PortA(-) Power ® PVL-D/2U/SCSI 5 pin 1 NC GND USB PortB(+) USB PortB(-) Power USB34 PVL-D/2U/SCSI USB connector 8. 4-pin CPU_FAN1/2, 3-pin REAR_FAN1/2, FRNT_FAN1/2 350 740 8.88 1 2.2 26.
4-16 +3 Volts -12 Volts Ground PSON# Ground Ground Ground -5 Volts +5 Volts +5 Volts +5 Volts Ground 12V 12V 12V 12V 24 8-pin 2.0 450W PVL-D/2U/SCSI ATX power connectors +5VSB +5VSB BMC SMBDATA 12CDATA1 FP_PWRBTN# BMC_PRESENT# BMC_SMI# GND PVL-D/2U/SCSI BMC connector SSI 24-pin ATX 12V GND GND GND GND 10.
11. SMBus 5-pin BPSMB1 SMBus Management Bus System SMBus ® PVL-D/2U/SCSI SCSI 1 SMBus BPSMB1 POWERLED+ NC POWERLEDMLED+ MLEDNC +5V GND GND SPKROUT ® 20-pin PANEL1 PVL-D/2U/SCSI 12.
4-pin SPEAKER ATX 2-pin PWRSW BIOS 2-pin RESET Reset 13.
BIOS BIOS BIOS
5.1 BIOS BIOS Basic Input/Output System 1. 2. DOS BIOS BIOS BIOS Windows 3. BIOS BIOS BIOS AFUDOS BIOS 5.1.1 1. a. b. a. b. c. d. 1.44MB DOS Enter 1.44MB Windows e. 2.
5.1.2 AFUDOS AFUDOS BIOS BIOS DOS AFUDOS BIOS BIOS BIOS BIOS BIOS 1024KB BIOS 1. AFUDOS afudos. exe 2. DOS filename A:\>afudos /oOLDBIOS1.rom 3. Enter BIOS A:\>afudos /oOLDBIOS1.rom AMI Firmware Update Utility - Version 1.10 Copyright (C) 2002 American Megatrends, Inc. All rights reserved. Reading flash ..... done Write to file ...ok A:\> BIOS RS260-E3 DOS 5-3
BIOS AFUDOS 1. BIOS http://support.asus.com.tw BIOS BIOS BIOS 2. AFUDOS.EXE 3. BIOS DOS filename BIOS A:\>afudos /iI8021A00.100 4. AFUDOS BIOS A:\>afudos /iI8021A00.100 AMI Firmware Update Utility - Version 1.19(ASUS V2.07(03.11.24BB)) Copyright (C) 2003 American Megatrends, Inc. All rights reserved. Reading file ....... done Reading flash ...... done Advance Check ...... Erasing flash ...... done Writing flash ......
5. BIOS DOS A:\>afudos /iI8021A00.100 AMI Firmware Update Utility - Version 1.19(ASUS V2.07(03.11.24BB)) Copyright (C) 2003 American Megatrends, Inc. All rights reserved. WARNING!! Do not turn off power during flash BIOS Reading file ..... done Reading flash ..... done Advance Check ...... Erasing flash ...... done Writing flash ...... done Verifying flash .... done Please restart your computer A:\> RS260-E3 5-5
5.1.3 CrashFree BIOS 2 BIOS CrashFree BIOS 2 BIOS 1. BIOS BIOS BIOS BIOS 2. BIOS I802A00.rom BIOS BIOS 1. 2. BIOS 3. BIOS Bad BIOS checksum. Starting BIOS recovery... Checking for floppy... BIOS Bad BIOS checksum. Starting BIOS recovery... Checking for floppy... Floppy found! Reading file “I8021A00.100”. Completed. Start flashing... BIOS 4.
BIOS BIOS 1. 2. 3. BIOS Bad BIOS checksum. Starting BIOS recovery... Checking for floppy... 4. Bad BIOS checksum. Starting BIOS recovery... Checking for floppy... Floppy not found! Checking for CD-ROM... CD-ROM found! Reading file “iI8021A00.100”. Completed. Start flashing... BIOS 5. BIOS BIOS http://support.asus.com.
5.1.4 Windows BIOS 1. BIOS 2. 3. BIOS BIOS BIOS 4. 5. BIOS BIOS ISP 1. 2. 3.
BIOS BIOS 1. 2. 3.
4. BIOS Next 5. BIOS BIOS BIOS BIOS BIOS BIOS 1. 2. 3. BIOS 4.
5.2 BIOS BIOS Basic Input and Output System BIOS BIOS BIOS RUN SETUP BIOS BIOS Flash ROM BIOS Flash ROM BIOS BIOS BIOS CMOS RAM BIOS POST Power-On Self Test Del Del Reset Ctrl + Alt + Del BIOS 1. B I O S BIOS 5.7 BIOS 2. Load Setup Defaults BIOS 3. http://support.asus.com.
5.2.1 BIOS Main Advanced Server BIOS SETUP UTILITY Security Boot Exit System Overview System Date System Time [Tue 06/21/2005] [11:10:19] Legacy Diskette A [1.44M, 3.5 in] IDE Configuration Primary IDE Master Primary IDE Slave Secondary IDE Master Secondary IDE Slave Third IDE Master Fourth IDE Master Use [ENTER], [TAB] or [SHIFT-TAB] to select a field. Use [+] or [-] to configure system time.
5.2.4 Main Advanced Server Security Boot Exit 5.2.5 Enter 5.2.6 5.2.7 Advanced Chipset settings WARNING: Setting wrong values in the sections below may cause system to malfunction. Enter Configure DRAM Timing by SPD Memory Acceleration Mode DRAM Idle Timer DRAm Refresh Rate [Enabled] [Auto] [Auto] [Auto] Graphic Adapter Priority Graphics Aperture Size Spread Spectrum [AGP/PCI] [ 64 MB] [Enabled] ICH Delayed Transaction [Enabled] MPS Revision [1.
5.3 Main Menu BIOS 5.2.1 BIOS Main Advanced Server BIOS SETUP UTILITY Security Boot Exit System Overview System Date System Time [Tue 06/21/2005] [11:51:19] Legacy Diskette A [1.44M, 3.5 in] IDE Configuration Primary IDE Master Primary IDE Slave Secondary IDE Master Secondary IDE Slave Third IDE Master Fourth IDE Master Use [ENTER], [TAB] or [SHIFT-TAB] to select a field. Use [+] or [-] to configure system time.
5.3.4 IDE IDE Configuration IDE Enter IDE Configuration Onboard IDE Operate Mode Enhanced Mode Support On IDE Detect Time Out (Sec) [Enhanced Mode] [S-ATA] [35] Set [Compatible Mode] when Legacy OS (i.e. WIN ME, 98, NT4.0, MS DOS) is used. Set [enhanced Mode] when native OS (i.e. WIN2000, WIN XP) is used.
5.3.5 IDE Primary, Secondary IDE Master, Third and Fourth IDE Master BIOS IDE IDE Enter Select the type of device connected to the system Primary IDE Master Device : Hard Disk Vendor : ST32122A Size : 2.
PIO Mode [Auto] PIO [Auto] [0] [1] [2] [3] [4] DMA Mode [Auto] DMA [Auto] [SWDAM0] [SWDAM1] [SWDAM2] [MWDAM0] [MWDAM1] [MWDAM2] [UDAM0] [UDAM1] [UDAM2] SMART Monitoring [Auto] Smart Monitoring, Analysis, and [Auto] [Disabled] [Enabled] Reporting Technology 32Bit Data Transfer [Disabled] 32 5.3.
Processor Information Processor Information *** CPU1 : Brand Intel(R) Xeon(TM) CPU 2.80GHz ID/uCode 0F34h/014h Ratio Value Actual 14 Max 14 Cache Value L1/16KB L2/2048KB L3/0KB *** CPU2 : Brand ID/uCode Ratio Value Cache Value Intel(R) Xeon(TM) CPU 2.
5.4 Advanced menu Advanced Setting Configure CPU. CPU Configuration Chipset Configuration Onboard Device Configuration PCI/PnP Configuration Power Configuration Hardware Monitor +F1 F10 ESC 5.4.1 Select Screen Select Item Change Option General Help Save and Exit Exit CPU Configuration Enter Configure Advanced CPU settings MPS Table Hyper Threading Technology Max CPUID Value Limit: Enhamced C1 Control CPU Internal Thermal Control [1.
Hyper-Threading Technology [Enabled] Hyper-Threading [Disabled] [Enabled] Max CPUID Value Limit [Disabled] [Enabled] CPUID [Disabled] [Enabled] Enhanced C1 Control [Auto] C1E [Disabled] [Auto] CPU BIOS CPU CPU idle C1E [Auto] Cpu Internal Thermal Control [Auto] [Auto] BIOS [Auto] [Disabled] EIST Enhanced Intel SpeedStep Technology Intel Pentium 4 ® Intel(R) Speedstep(tm) Tech [Automatic] Intel EIST [Automatic] [Automatic] [Disabled] EIST EIST 5-20 BIOS BIOS
5.4.2 Chipset Configuration Enter Options for NB. Advance Chipset Settings Warring: Setting wrong values in below section may cause system to malfunction.
NorthBridge Configuration NorthBridge Chipset Configuration DIMM SPEED: DDR2 400 Memory Ramp Feature Memory Mirroring/Sparing [Enabled] [Disabled] ENABLE: Allow remapping of overlapped PCI memory above the total physical memory. DISABLE: Do not allow remapping of memory.
5.4.3 OnBoard Devices Configuration Advanced Onboard Device Settings Configure the USB support. USB Configuration Super IO Configuration +F1 F10 ESC USB Select Screen Select Item Change Option General Help Save and Exit Exit USB Configuration USB Enter USB Configuration Enabled USB host controllers. Module Version - 2.23.2-5.3 USB Devices Enabled: None USB Function Legacy USB Support USB 2.0 Controller USB 2.
Legacy USB Support [Auto] USB [Auto] USB USB [Disabled] USB [Disabled] [Enabled] [Auto] USB USB 2.0 Controller [Enabled] USB 2.0 [Disabled] [Enabled] USB 2.0 Controller Mode [HiSpeed] 480Mbps Speed] USB 2.0 Full Speed 12Mbps HiSpeed [HiSpeed] [Full USB Mass Storage Device Configuration USB Enter USB Mass Storage Device Configuration USB Mass Storage Reset Delay [20 Sec] No USB Mass Storage device detected ENABLE: Allow remapping of overlapped PCI memory above the total physical memory.
Super I/O Configuration Win83627THF Super IO Chipset Serial port1 Address Serial port2 Address Serial Port2 Mode Allow BIOS to select Serial Port1 Base Address.
5.4.4 PCI IRQ legacy ISA PCI/PnP Configuration PCI/PnP DMA PCI/PnP PCI/PnP legacy ISA Advanced PCI/PnP Settings Plug And Play O/S Palette Snooping [No] [Disabled] IRQ-3 assigned to IRQ-4 assigned to IRQ-5 assigned to IRQ-7 assigned to IRQ-9 assigned to IRQ-10 assigned to IRQ-11 assigned to IRQ-14 assigned to IRQ-15 assigned to [PCI [PCI [PCI [PCI [PCI [PCI [PCI [PCI [PCI NO: Lets the BIOS configure all the devices in the system.
5.4.5 Power Configuration APM ACPI Enter Power Configuration ACPI APIC Support Include ACPI APIC table pointer list. IMPORTANT!!! Do not change the APIC support settings after OS installation; otherwise, a system boot failure may occur.
APM Configuration APM Configuration Enable or disable APM.
Restore on AC Power Loss [Last State] [Power Off] [Power On] [Last [Power State] Off] [Power On] [Last State] Power On By PS/2 Keyboard [Disabled] ATX 1 5VSB [Disabled] [Enabled] Power On By PS/2 Mouse [Disabled] [Enabled] ATX PS2 1 5VSB [Disabled] [Enabled] Power On Ring [Disabled] [Enabled] [Disabled] [Enabled] Power On By PME# [Disabled] [Enabled] PME [Disabled] [Enabled] Power On By RTC Alarm [Disabled] RTC [Enabled] [Disabled] [Enabled] RS260-E3 5-29
5.4.6 Hardware Monitor Hardware Monitor CPU1 Temperature CPU2 Temperature MB Temperature Front1 Fan Speed Front2 Fan Speed Rear1 Fan Speed Rear2 Fan Speed Smart Fan Control CPU1 Temperature CPU2 Temperature MB Temperature VCORE1 Voltage [49ºC/120ºF] [47ºC/114ºF] [39ºC/102ºF] [N/A] [N/A] [6521RPM] [6367RPM] [Smart Fan II] [060] [060] [50] [ 1.236V] VCORE2 Voltage 3.3V Voltage 5V Voltage 5VSB Voltage VBAT Voltage 12V Voltage [ 1.258V] [ 3.280V] [ 5.010V] [ 4.980V] [ 3.088V] [11.749V] CPU1 Temperature.
Smart Fan Control [Smart Fan II] ASUS Q-Fan ASUS Q-Fan [Disabled] [Smart Fan] [Smart Fan II] CPU1/CPU2 Temperature [Smart Fan] MB Temperature Smart Fan Control [Smart Fan II] CPU1/CPU2 Temperature [xxx] MB Temperature [xxx] CPU Vcorel1/2 Voltage, 3.
5.5 Server menu Enter Main Advanced Server BIOS SETUP UTILITY Security Boot Exit Server Ferture Configure Remote Access. Remote Access Configuration Select Screen Select Item +- Change Option F1 General Help F10 Save and Exit ESC Exit v02.58 (C) Copyright 1985-2004, American Megatrends, Inc. Remote Access Configuration Enter Main Advanced Server BIOS SETUP UTILITY Security Boot Configure Remote Access type and parameters Remote Access [Disabled] Exit Select Remote Access type.
Remote Access [Disabled] [Enabled] [Disabled] [Disabled] [Enabled] Remote Access [Enabled] Serial port number [COM1] [COM1] [COM2] Baudrate [19200] [115200] [57600] [38400] [19200] [9600] Flow Control [None] [None] [Hardware] [ Software] Redirection After BIOS POST [Always] POST [Always] [Disabled] [Boot Loader] [ Always] Terminal Type [ANSI] [ANSI] [VT100] [VTUTF8] VT-UTFB Combo Key Support [Disabled] VT-UTF8 [Disabled] [Enabled] ANSI VT100 Media Type [Serial] [Serial] [LAN] [Serial+LAN] RS260
5.6 Security Enter Main Advanced Server BIOS SETUP UTILITY Security Boot Exit Security Settings Supervisor Password User Password to change password. again to disabled password. : Not Installed : Not Installed Change Supervisor Password Select Screen Select Item +- Change Option F1 General Help F10 Save and Exit ESC Exit v02.58 (C) Copyright 1985-2004, American Megatrends, Inc. Change Supervisor Password Supervisor Password 1. 2. 3. Enter Enter . BIOS CMOS RTC 2.
BIOS SETUP UTILITY Security Security Settings Supervisor Password User Password to change password. again to disabled password. : Installed : Not Installed Change Supervisor Password User Access Level Change User Password Clear User Password Password Check [Full Access] [Setup] +F1 F10 ESC Select Screen Select Item Change Option General Help Save and Exit Exit v02.58 (C) Copyright 1985-2004, American Megatrends, Inc.
Enter Clear User Password Password Check [Setup] [Setup] BIOS [Always] [Setup] [Always] 5-36 BIOS BIOS BIOS
5.7 Boot menu Main Advanced Server BIOS SETUP UTILITY Security Boot APM Configuration Exit Specifies the boot Device Priority sequence. Boot Device Priority Boot Settings Configuration +F1 F10 ESC Select Screen Select Item Change Option General Help Save and Exit Exit v02.58 (C) Copyright 1985-2004, American Megatrends, Inc. 5.7.
5.7.2 Boot Settings Configuration Main Advanced BIOS SETUP UTILITY Security Boot Server Boot Settings Configuration Quick Boot Full Screen Logo Bootup Num-Lock PS/2 Mouse Support Wait For ‘F1’ If Error Hit ‘DEL’ Message Display Interrupt 19 Capture Exit Specifies the boot llows BIOS to skip certain tests while booting. This will decrease the time needed to boot the system.
5.8 BIOS Exit menu BIOS Main Advanced BIOS BIOS SETUP UTILITY Security Boot Server Exit Exit Options Exit system setup after saving the changes. Exit & Save Changes Exit & Discard Changes Discard Changes Load Setup Defaults Select Screen Select Item +- Change Option F1 General Help F10 Save and Exit ESC Exit v02.58 (C) Copyright 1985-2004, American Megatrends, Inc.
Discard Changes Enter BIOS BIOS [OK] [Cancel] BIOS Load Setup Defaults F5 [OK] [Cancel] 5-40 Enter BIOS BIOS BIOS
6.1 RAID 6.1.
6.1.2 Serial ATA RAID SCSI RAID NCLD-DS2 SCSI 1. SCSI 2. SCSI SCSI 3. SCSI 4 BIOS 6.1.
6.2 Adaptec SCSI SCSIselect(TM) RAID 0 RAID 1 Adaptec AIC-7902 SCSI Adaptec SCSI RAID RAID 10 Adaptec SCSI SCSIselect 1. Ctrl-A SCSIselect (TM) Utility 2. POST SCSI + 3.
6.2.1 SCSI SCSI RAID SCSI SCSI channel Configure/View SCSI Controller Settings 6.2.2 HostRAID Adaptec HostRAID 1. Configuration 2. 3. HostRAID Enable 4.
< Esc > /View HostRAID Settings] 6.2.3 1.
2. SCSI Free RAID SCSI Utilities RAID RAID RAID SCSI Disk RAID 3.
4. < SpaceBar > X 5. 4 RAID < Enter > 6. Strip Size 7.
8. Yes 9. RAID 0 Yes RAID RAID 0 10.
6.2.4 RAID 1 Mirror RAID 1 1. 2. RAID 0 Select RAID Type 1~2 RAID-1 Fault Tolerance Striping Requirements RAID 3. < SpaceBar > < Enter > X 4.
6. RAID-1 Build Option [Create new RAID-1] Create a New RAID-1 - RAID 1 Copy from ( 0) to ( 1) - Copy from ( 1) to ( 0) 7. RAID 1 8. Yes 9. Yes RAID 10.
11. RAID 1 RAID1 12.
6.2.5 RAID 0+1 10, Stripe+Mirror RAID 10 1. HostRAID Setting] < Enter > 2.
3. Select RAID Type High Performance RAID-10 Fault Tolerance, Striping/Mirroring Requirements RAID 4. < SpaceBar > < Enter > X 5.
6. Strip Size 7. < Enter > RAID 10 8. Yes 9.
10.
6.2.6 RAID 1 Add Spare RAID 1 1. HostRAID Setting] 2. 10 RAID 10 < S> Add Spare [Configure/View HostRAID 3. RAID 1 SCSI Channel RAID 10 Free 4.
5. RAID 6.2.7 RAID 10 1.
2. 3. Yes 4.
6.2.8 RAID RAID 1. [Configure/View HostRAID Setting] 2. RAID 0 RAID 10 RAID 1 3 Drive ID 1 Drive ID 2 Drive ID 1 & 2 None - drive 1 drive 2 drive 1 3. Yes 4.
6.2.9 RAID RAID 1 RAID 10 RAID 1. RAID 2. < Enter > Yes Build/Rebuile Complete 3.
6.2.10 RAID 1. Configure/View HostRAID Setting 2. 3.
4. Mark bootable RAID B RAID 6.2.11 1. SCSI Disk Utilities 2.
3. Verify Disk Media SCSI Disk Utility 4.
7.1 RAID RAID RAID 7.1.1 RAID / RAID Windows 2000/2003 Linux RAID DOS RAID DOS RAID 1. 2. 3. BIOS BIOS 4. 5. CDROM Loading FreeDOS FAT KERNEL GO! Press any key to boot from CDROM... Makedisk 6. RAID 7. 8.
Windows 2000/2003 Server Windows 2000/2003 RAID Windows RAID Windows 1. 2. RAID Drives RAID driver disk utility 3. 4. 5. RAID Red Hat Enterprise ver. 3.0 update 5 Red Hat Enterprise ver. 3.0 update 5 RAID 1. 2. Adaptec AIC-7902W HostRAID \Drivers\adaptec\aic7902\HostRAID\Linux\a320raid-3.00.057rhel3qu5.tar.gz ( Please decompress the *.gz file into the local hard disk, and then decompress the a320raid-3.00.057-rhel3qu5.i386.img into the floppy disk ) 3.
7.1.2 RAID Windows 2000/2003 Server Windows 2000/2003 Server Windows 2000/2003 Server 1. Windows 2000/2003 Server Windows 2000/2003 Setup 2. Press F6 if you need to install a third party SCSI or RAID driver... 3.
4. RAID 5. Adaptec HostRAID U320 Driver ver. 1.02 Adaptec AIC-7902W SCSI RAID Adaptec HostRAID U320 Driver ver. 1.02 XP/2003 6. Windows Windows 2000/ RAID 7.
Windows 2000/2003 Server Windows 2000/2003 Server 1. RAID Administrator Windows 2. Windows Hardware Found New Cancel 3. My Computer Properties 4. Hardware 5. 6. 7. Drvice Manager RAID Controller Driver Update Driver Upgrade Device Driver Wizard Next 8. 9. 7-6 Properties RAID Search for a suitable driver for my device (recommended) Next 10. RAID Next 11.
RAID 1. My Computer Properties 2. 3. Hardware Drvice Manager SCSI and RAID controllers + Adaprec AIC-7901-Ultra320 SCSI PVL/2U/SCSI 7902W HostRAID Driver 4. Adaptec AIC- RAID controller driver Properties 5. Dirver RAID 6.
Red Hat Enterprise ver. 3.0 update 5 Red Hat Enterprise ver. 3.0 update 5 RAID 1. 2.
3. Yes 4.
5. RAID OK 6. RAID 2U/SCSI 7-10 Red Hat Enterprise ver. 3.
7.2 Broadcom Gigabit 7.2.1 Windows 2000/2003 Server Windows 2000/2003 Broadcom Gigabit 1. 2. Administrator Windows New Hardware Found 3. Windows Cancel / Drivers Drivers BIN 3. ASSETUP.
4.
7.2.2 Red Hat Enterprise ver. 3.0 update 5 Red Hat Enterprise ver. 3.0 update 5 Broadcom Gigabit TAR TAR 1. TAR tar xvzf bcm5700-.tar.gz bcm5700.o 2. cd bcm5700-/scr make 3. insmod bcm5700.o 4. make install 5.
7.3 ATI RAGE XL 7.3.1 Windows 2000 Server Windows XP/20003 Server ATI RAGE XL Windows 2000 Windows 2000 Windows 2003/XP ATI Rage XL 1. 2. Administrator Windows New Hardware Found 3. Windows Cancel / Drivers 4.
5. Next 7.3.2 Red Hat Enterprise ver. 3.0 update 5 Red Hat Enterprise ver. 3.
7.4 tw.asus.com 7.4.1 Drivers Drivers BIN 7.4.2 Drivers 7-16 ASSETUP.
7.4.3 Management Software 7.4.4 Utilities menu Windows 7.4.
7-18
A
A.1 1. Introduction A.1.
A.1.2 +3.33V 3.25 3.30 3.35 50mVp-p +5V 4.90 5.00 5.10 50mVp-p +12V 11.40 12.00 12.60 120mVp-p -12V -11.40 -12.00 -13.80 120mVp-p 4.8 5.00 5.25 50mVp-p +5VSB (A) (A) (W) +3.33V 0.5 40 66.0 +5V 0.5 50 100.0 +12V1 0.5 12.5 216.0 +12V2 0.5 12.5 216.0 +12V3 1.5 14.0 300.0 +12V4 1.5 14.0 300.0 -12V 0.0 0.5 6.0 +5VSB 0.0 2.0 10.0 +3.33V 3.8 4.3 +5V 5.7 6.5 +12V 13.5 15.
A.2 1. Introduction 1 Windows 2000 Advanced Server w/SP4 2 Windows Server 2003 Enterprise/SP1 3 Windows Server 2003 x64 Enterprise/SP1 4 RedHat Enterprise Linux AS3.0/UP5 32bit 5 RedHat Enterprise Linux AS4.0 32bit 6 RedHat Enterprise Linux AS4.0 64bit 7 SuSE Linux Enterprise 9.0 W/SP2 32bit A.
Wintec 1GB DDR2-400 1GB ECC/REG (Single Rank) Infineon / HYB18T512 400AF-5 Wintec 512MB DDR2-400 512MB ECC/REG (Single Rank) Samsung / K4T51083QB-GCD5 Apacer 512MB DDR2-400 512MB ECC/REG (Single Rank) Infineon / HYB18T512800AF-5 Apacer 1GB DDR2-400 1GB ECC/REG (Single Rank) Infineon / HYB1875T512400AF-5 ATP 1GB DDR2-400 1GB ECC/REG (Single Rank) ATP 512MB DDR2-400 512MB ECC/REG (Single Rank) Samsung / K4T51043QB-GCCC Samsung / K4T56043QF-GCCC Apacer 2GB DDR2-400 2GB ECC/REG (Single Ran
LAN card Vendor ASUS Intel Intel Intel SCSI card Vendor ASUS LSI Adaptec Adaptec Adaptec 1. Introduction Product No.
A.4 1. 2. 3. 1. POST 2. 1. 2. Non-system disk or disk 1. error 2. 1. RJ-45 2.
1. Introduction BIOS 5 7 0 0 R P M Hardware Monitor CPU 11800RPM Smart-Fan Smart-Fan 1. Disabled Enabled BIOS CPU 60 CPU CPU 2. BIOS CPU 60 3. BIOS CPU 60 3-pin CPU_FAN1 mid-fan AR21 FANBPC- Chassis intruded! Fatal error......
1. Reset 2. Reset 3. 4-4 RS260-E3 13.
A.5 1. Introduction Intel Intel with 800 MHz system bus with 800 MHz system bus System Bus 64-bit, 800 MHz X4 PCI Express 8xDDRII 400 DIMM slots (max. 16 GB) PCIE1 Eight DDRII 400 DIMM Sockets PCI-X 1.0 bus (64Bit/133MHz) PCI bridge Intel PXH PCI-X 1.0 bus (64Bit/133MHz) PCIE2 Intel Memory Controller Hub (E7520) PCI Express interface X4 PCI Express PCI bridge Intel PXH PCI-X 1.
