User's Manual

第六章：磁碟陣列設定6-8
請依照以下的步驟，建立IME組合：
1. 顯示AdapterProperties設定畫面。
 使用方向鍵來選擇RAIDProperties，然後按<Enter>鍵。
2. 顯示SelectNewArrayType設定畫面。
 使用方向鍵選擇CreateIMEVolume，然後按<Enter>鍵。
6.2.2 建立 RAID 1E（IME）
Esc = Exit Menu F1/Shift+1 = Help
Enter = Select Item -/+ = Change Item
LSILogicCongUtilityv6.08.05.00(2006.08.02)
Adapter Properties -- SAS1068
Adapter SAS1068
PCI Slot 00
PCI Address(Bus/Dev/Func) 05.03.00
MPT Firmware Revision 1.15.00.00-IR
SAS Address 500E0180:60831008
NVIDIA Version 25.02
Status Disabled
Boot Order 0
Boot Support
(Enabled OS only)
RAID Properties
SAS Topology
Advanced Adapter Properties
Esc = Exit Menu F1/Shift+1 = Help
Enter = Choose array type to create
LSILogicCongUtilityv6.08.05.00(2006.08.02)
Select New Array Type -- SAS1068
Create IM Volume Create Integrated Mirror Array of 2
disks plus an optional hot spare. Data
on the primary disk may be migrated.
Create IME Volume Create Integrated Mirrored Enhanced
Array of 3 to 8 disks including an
optional hot spare.
ALL Data
on array disks will be deleted!
Create IS Volume Create Integrated Striping array of
2 to 8 disks.
ALL Data
on array disks will be deleted!