User Manual

華碩 RS300-E11 系列用戶手冊
5-23
關閉 SIO Logical Devices 可能會造成嚴重影響，設置前請謹慎評估。
以下項目只有在 Use This Device 設置為 [Enabled] 時才會出現。
Possible: [Use Automatic Settings]
本項目可以更改設備資源設置，更改會在重新啟動後生效。設置值有：[Use
Automatic Settings] [IO=3F8h; IRQ=4; DMA;] [IO=3F8h; IRQ=3, 4, 5, 7, 9, 10,
11, 12; DMA;] [IO=2F8h; IRQ=3, 4, 5, 7, 9, 10, 11, 12; DMA;] [IO=3E8h; IRQ=3,
4, 5, 7, 9, 10, 11, 12; DMA;] [IO=2E8h; IRQ=3, 4, 5, 7, 9, 10, 11, 12; DMA;]
5.4.11 PCI 子系統設置（PCI Subsystem Settings）
本項目提供您設置 PCI、 PCI-X 和 PCI Express。
PCI Latency Timer [32 PCI Bus Clocks]
數值為程序化至 PCI latency timer 註冊器裡。設置值有：[32 PCI Bus Clocks] [64
PCI Bus Clocks] [96 PCI Bus Clocks] [128 PCI Bus Clocks] [160 PCI Bus Clocks]
[192 PCI Bus Clocks] [224 PCI Bus Clocks] [248 PCI Bus Clocks]
PCI-X Latency Timer [64 PCI Bus Clocks]
數值為程序化至 PCI latency timer 註冊器裡。設置值有：[32 PCI Bus Clocks] [64
PCI Bus Clocks] [96 PCI Bus Clocks] [128 PCI Bus Clocks] [160 PCI Bus Clocks]
[192 PCI Bus Clocks] [224 PCI Bus Clocks] [248 PCI Bus Clocks]
VGA Palette Snoop [Disabled]
本項可啟用或關閉 VGA pallette registers snooping 功能。設置值有：[Disabled]
[Enabled]