User Manual

華碩 RS300-E8-PS4、RS300-E8-RS4 使用手冊
5-21
USB transfer time-out [20 sec]
本項提供您選擇 USB transfer time-out 數值。設定值有:[1 sec] [5 sec]
[10 sec] [20 sec]
Device reset time-out [20 sec]
提供您選擇 USB device reset time-out 數值。設定值有:[10 sec] [20 sec]
[30 sec] [40 sec]
Device power-up delay [Auto]
在做適當的自我回報給 Host Controller(主機控制器)之前,提供您在設
定採用最大時間值。設定值有:[Auto] [Manual]
Security Device Support [Disabled]
啟用或關閉加密裝置的 BIOS 支援。設定值有:[Disabled] [Enabled]
5.4.7 TPM
Aptio Setup Utility - Copyright (C) 2013 American Megatrends, Inc.
Advanced
Enables or Disables BIOS
support for security
device.O.S. will not
show Security Device. TCG
EFI protocol and INT1A
interface will not be
available.
Conguration
TPM Support [Disable]
Current Status Information
NO Security Device Found
Enable Hibernation [Enabled]
本項啟用或關閉 Hibernation 功能(OS/S4 休眠狀態)設定值有:
[Disabled] [Enabled]
ACPI Sleep State [Both S1 and S3 available for OS to choose
from]
提供您設定 ACPI 休眠狀態。設定值有:[Suspend Disabled] [S1 only (CPU
Stop Clock)] [S3 only (Suspend to RAM)] [Both S1 and S3 available for OS to
choose from]
5.4.8 ACPI 設定
Aptio Setup Utility - Copyright (C) 2013 American Megatrends, Inc.
Advanced
ACPI Settings
Enable Hibernation [Enabled]
ACPI Sleep State [Both S1 and S3 avai...]
Enables or Disables
System ability to
Hibernate (OS/S4 Sleep
State). This option may
not be effective with
some OS.