User Manual
Table Of Contents
- Safety information
- Chapter 1: Product Introduction
- Chapter 2: Hardware Information
- 2.1 Chassis cover
- 2.2 Air ducts
- 2.3 Central Processing Unit (CPU)
- 2.4 System memory
- 2.5 Storage devices
- 2.6 Expansion slot
- 2.6.1 Installing an expansion card to the left PCIe riser card bracket
- 2.6.2 Installing an expansion card to the right PCIe riser card bracket
- 2.6.3 Installing a ASUS PIKE II card to the right PCIe riser card bracket
- 2.6.4 Installing an OCP 3.0 card to the OCP 3.0 slot
- 2.6.5 Installing an M.2 (NGFF) card
- 2.6.6 (optional) Installing the PFR module
- 2.6.7 Configuring an expansion card
- 2.7 Cable connections
- 2.8 Backplane cabling
- 2.9 Storage device configuration and cabling
- 2.10 Removable/optional components
- Chapter 3: Installation Options
- Chapter 4: Motherboard Information
- Chapter 5: BIOS Setup
- 5.1 Managing and updating your BIOS
- 5.2 BIOS setup program
- 5.3 Main menu
- 5.4 Performance Tuning menu
- 5.5 Advanced menu
- 5.5.1 Trusted Computing
- 5.5.2 PSP Firmware Versions
- 5.5.3 Redfish Host Interface Settings
- 5.5.4 APM Configuration
- 5.5.5 Onboard LAN Configuration
- 5.5.6 Serial Port Console Redirection
- 5.5.7 CPU Configuration
- 5.5.8 PCI Subsystem Settings
- 5.5.9 USB Configuration
- 5.5.10 Network Stack Configuration
- 5.5.11 CSM Configuration
- 5.5.12 NVMe Configuration
- 5.5.13 SATA Configuration
- 5.5.14 AMD Mem Configuration Status
- 5.6 Chipset menu
- 5.7 Security menu
- 5.8 Boot menu
- 5.9 Tool menu
- 5.10 Save & Exit menu
- 5.11 AMD CBS menu
- 5.12 Event Logs menu
- 5.13 Server Mgmt menu
- Chapter 6: Driver Installation
- Appendix
5-25
ASUS RS520A-E11-RS12U
SATA Partial State Capability [Enabled]
Indicates whether Host Bus Adapter (HBA) can support transitions to the
partial state.
Configuration options: [Disabled] [Enabled]
SATA FIS Based Switching [Enabled]
Indicates whether Host Bus Adapter (HBA) can support port multiplier FIS-
based switching.
Configuration options: [Disabled] [Enabled]
SATA Command Completion Coalescing Support [Disabled]
Indicates whether Host Bus Adapter (HBA) can support command
completion coalescing.
Configuration options: [Disabled] [Enabled]
SATA Slumber State Capability [Enabled]
Indicates whether Host Bus Adapter (HBA) can support transitions to the
slumber state.
Configuration options: [Disabled] [Enabled]
SATA Target Support 8 Devices [Disabled]
Indicates whether SATA target support 8 devices function.
Configuration options: [Disabled] [Enabled]
Generic Mode [Disabled]
Allows you to SATA disable Generic Mode.
Configuration options: [Disabled] [Enabled]
SATA AHCI Enclosure [Disabled]
Allows you to enable or disable SATA AHCI Enclosure Management.
Configuration options: [Disabled] [Enabled]
SATA SGPIO 0 [Disabled]
Allows you to enable or disable SATA Serial General Purpose Input/Output
(SGPIO) 0.
Configuration options: [Disabled] [Enabled]
SB FUSION DEBUG Configuration
The items in this submenu contains options for SB FUSION DEBUG Configuration.
TimerTick Tracking [Disabled]
Configuration options: [Disabled] [Enabled]
Clock Interrupt Tag [Disabled]
Configuration options: [Disabled] [Enabled]
SB MISC DEBUG Configuration
The items in this submenu contains options for SB DEBUG Configuration.
SB Clock Spread Spectrum [Enabled]
Allows you to enable or disable CG1_PLL Spread Spectrum.
Configuration options: [Disabled] [Enabled]
HPET In SB [Enabled]
Allows you to enable or disable the HPET Function Switch.
Configuration options: [Disabled] [Enabled]
MsiDis in HPET [Enabled]
Expose MSI capability in HPET Capability register.
Configuration options: [Disabled] [Enabled]