User Manual

Table Of Contents
Chapter 2: Hardware Information
2-36
2.9.1 12 x NVMe/SATA/SAS storage device configuration
and cabling
The illustrations in this section are for reference only and may vary between models.
1. Install the storage devices into the supported bays.
Refer to section
Storage Devices
for details on how to install storage devices.
Backplane connector Cable Connect to
SLIMPCIE1 Slimline PCIe to Slimline PCIe SLMPCIE1 on motherboard
SLIMPCIE_P3 and
SLIMPCIE_P4
Slimline PCIe to Slimline PCIe SLMPCIE2 on motherboard
SLIMPCIE3 Slimline PCIe to Slimline PCIe SLMPCIE3 on motherboard
SLIMPCIE4 Slimline PCIe to Slimline PCIe SLMPCIE4 on motherboard
SLIMPCIE_P9 and
SLIMPCIE_P10
Slimline PCIe to Slimline PCIe SLMPCIE5 on motherboard
SLMPCIE6 Slimline PCIe to Slimline PCIe SLMPCIE6 on motherboard
MSAS_HD1 and
MSAS_HD2
Slimline PCIe to Mini SAS HD SLMSATAPCIE7 on motherboard
MSAS_HD3 Slimline PCIe to Mini SAS HD SLMSATAPCIE8 on motherboard
1 2
3 4
RESET
NVMe/SATA/SAS NVMe/SATA/SAS NVMe/SATA/SAS NVMe/SATA/SAS
NVMe/SATA/SAS NVMe/SATA/SAS NVMe/SATA/SAS NVMe/SATA/SAS
NVMe/SATA/SAS NVMe/SATA/SAS NVMe/SATA/SAS NVMe/SATA/SAS