Installation Guide

8. Lift the server chassis and insert it into the rack rail.

• Ensure that the rack rail cabinet and the rack posts are stable and standing firmly on a level

surface.

• We strongly recommend that at least two able-bodied persons perform this step.

• We recommend the use of an appropriate lifting tool or device, if necessary.

Ensure to include the side knots on the two sides of the server in the rack rail holders.

5. Press the spring lock on the other end of rail then insert the stud into the mounting hole on the

rack post. Extend the rack rail, if necessary.

6. (Optional) Use the rail screw and rail washer that comes with the kit to secure the rack rail to the

rear rack post.

7. Perform steps 4 to 6 for the other rack rail.

Ensure that the installed rack rails (left and right) are aligned, secured, and stable in place.

Rear rack post